forked from forks/qmk_firmware
Merge branch 'user_led_configuration' into infinity60
Conflicts: keyboards/infinity60/keymaps/jpetermans/keymap.c
This commit is contained in:
jpetermans
commit
e6c9b07e1c
|
|
@ -1,385 +0,0 @@
|
|||
flabbergast's TMK/ChibiOS port
|
||||
==============================
|
||||
2015/10/16
|
||||
|
||||
|
||||
Build
|
||||
-----
|
||||
$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git
|
||||
|
||||
$ cd tmk_keyboard
|
||||
$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
|
||||
or
|
||||
$ cd tmk_keyboard/tmk_core/tool/chibios
|
||||
$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
|
||||
|
||||
$ cd tmk_keyboard/keyboard/infinity_chibios
|
||||
$ make
|
||||
|
||||
|
||||
|
||||
|
||||
Chibios Configuration
|
||||
---------------------
|
||||
halconf.h: for HAL configuration
|
||||
placed in project directory
|
||||
read in chibios/os/hal/hal.mk
|
||||
included in chibios/os/hal/include/hal.h
|
||||
mcuconf.h: for MCU configuration
|
||||
placed in project directory
|
||||
included in halconf.h
|
||||
|
||||
|
||||
Chibios Term
|
||||
------------
|
||||
PAL = Port Abstraction Layer
|
||||
palWritePad
|
||||
palReadPad
|
||||
palSetPad
|
||||
chibios/os/hal/include/pal.h
|
||||
|
||||
LLD = Low Level Driver
|
||||
|
||||
|
||||
Makefile
|
||||
--------
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = KINETIS
|
||||
MCU_SERIES = KL2x
|
||||
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = MKL26Z64
|
||||
|
||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = kl2x
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = PJRC_TEENSY_LC
|
||||
|
||||
MCU = cortex-m0
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 6
|
||||
|
||||
|
||||
halconf.h
|
||||
---------
|
||||
|
||||
|
||||
mcuconf.h
|
||||
---------
|
||||
|
||||
|
||||
chconf.h
|
||||
--------
|
||||
|
||||
|
||||
ld script
|
||||
---------
|
||||
--- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld 2015-10-15 09:08:58.732904304 +0900
|
||||
+++ ld/MKL26Z64.ld 2015-10-15 08:48:06.430215496 +0900
|
||||
@@ -27,7 +27,8 @@
|
||||
{
|
||||
flash0 : org = 0x00000000, len = 0xc0
|
||||
flashcfg : org = 0x00000400, len = 0x10
|
||||
- flash : org = 0x00000410, len = 64k - 0x410
|
||||
+ flash : org = 0x00000410, len = 62k - 0x410
|
||||
+ eeprom_emu : org = 0x0000F800, len = 2k
|
||||
ram : org = 0x1FFFF800, len = 8k
|
||||
}
|
||||
|
||||
@@ -35,6 +36,10 @@
|
||||
__ram_size__ = LENGTH(ram);
|
||||
__ram_end__ = __ram_start__ + __ram_size__;
|
||||
|
||||
+__eeprom_workarea_start__ = ORIGIN(eeprom_emu);
|
||||
+__eeprom_workarea_size__ = LENGTH(eeprom_emu);
|
||||
+__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
|
||||
+
|
||||
SECTIONS
|
||||
{
|
||||
. = 0;
|
||||
|
||||
|
||||
|
||||
Configuration/Startup for Infinity 60%
|
||||
--------------------------------------
|
||||
Configuration:
|
||||
|
||||
|
||||
Clock:
|
||||
Inifinity
|
||||
FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz
|
||||
Clock dividor:
|
||||
SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock
|
||||
SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock
|
||||
SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock
|
||||
Internal reference clock:
|
||||
MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL
|
||||
MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable
|
||||
FLL multipilication:
|
||||
MCG_C4[DMX32] = 1
|
||||
MCG_C4[DRST_DRS] = 01 FLL factor 1464 * 32.768kHz = 48MHz
|
||||
|
||||
chibios/os/hal/ports/KINETIS/K20x/hal_lld.c
|
||||
k20x_clock_init(): called in __early_init() defined in board.c
|
||||
disable watchdog and configure clock
|
||||
|
||||
configurable macros:
|
||||
KINETIS_NO_INIT: whether init or not
|
||||
KINETIS_MCG_MODE: clock mode
|
||||
KINETIS_MCG_MODE_FEI
|
||||
KINETIS_MCG_MODE_PEE
|
||||
hal/ports/KINETIS/K20x/hal_lld.h
|
||||
|
||||
|
||||
chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h
|
||||
PALConfig pal_default_config
|
||||
boardInit()
|
||||
__early_init()
|
||||
macro definitions for board infos, freq and mcu type
|
||||
|
||||
chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c
|
||||
|
||||
USB
|
||||
|
||||
|
||||
Startup
|
||||
-------
|
||||
common/ports/ARMCMx/GCC/crt0_v[67]m.s
|
||||
Reset_Handler: startup code
|
||||
common/ports/ARMCMx/GCC/crt1.c
|
||||
__core_init(): weak
|
||||
__early_init(): weak
|
||||
__late_init(): weak
|
||||
__default_exit(): weak
|
||||
called from Reset_Handler of crt0
|
||||
common/ports/ARMCMx/GCC/vector.c
|
||||
common/ports/ARMCMx/GCC/ld/*.ld
|
||||
|
||||
chibios/os/common/ports/ARMCMx/compilers/GCC/
|
||||
├── crt0_v6m.s
|
||||
├── crt0_v7m.s
|
||||
├── crt1.c
|
||||
├── ld
|
||||
│ ├── MK20DX128BLDR3.ld
|
||||
│ ├── MK20DX128BLDR4.ld
|
||||
│ ├── MK20DX128.ld
|
||||
│ ├── MK20DX256.ld
|
||||
│ ├── MKL25Z128.ld
|
||||
│ ├── MKL26Z128.ld
|
||||
│ ├── MKL26Z64.ld
|
||||
│ └── STM32L476xG.ld
|
||||
├── mk
|
||||
│ ├── startup_k20x5.mk
|
||||
│ ├── startup_k20x7.mk
|
||||
│ ├── startup_k20x.mk
|
||||
│ ├── startup_kl2x.mk
|
||||
│ └── startup_stm32l4xx.mk
|
||||
├── rules.ld
|
||||
├── rules.mk
|
||||
└── vectors.c
|
||||
|
||||
chibios/os/hal/
|
||||
├── boards
|
||||
│ ├── FREESCALE_FREEDOM_K20D50M
|
||||
│ │ ├── board.c
|
||||
│ │ ├── board.h
|
||||
│ │ └── board.mk
|
||||
│ ├── MCHCK_K20
|
||||
│ │ ├── board.c
|
||||
│ │ ├── board.h
|
||||
│ │ └── board.mk
|
||||
│ ├── PJRC_TEENSY_3
|
||||
│ │ ├── board.c
|
||||
│ │ ├── board.h
|
||||
│ │ └── board.mk
|
||||
│ ├── PJRC_TEENSY_3_1
|
||||
│ │ ├── board.c
|
||||
│ │ ├── board.h
|
||||
│ │ └── board.mk
|
||||
│ ├── PJRC_TEENSY_LC
|
||||
│ │ ├── board.c
|
||||
│ │ ├── board.h
|
||||
│ │ └── board.mk
|
||||
│ ├── readme.txt
|
||||
│ ├── simulator
|
||||
│ │ ├── board.c
|
||||
│ │ ├── board.h
|
||||
│ │ └── board.mk
|
||||
│ ├── ST_NUCLEO_F030R8
|
||||
│ │ ├── board.c
|
||||
│ │ ├── board.h
|
||||
│ │ ├── board.mk
|
||||
│ │ └── cfg
|
||||
│ │ └── board.chcfg
|
||||
├── hal.mk
|
||||
├── include
|
||||
│ ├── adc.h
|
||||
│ ├── can.h
|
||||
│ ├── dac.h
|
||||
│ ├── ext.h
|
||||
│ ├── gpt.h
|
||||
│ ├── hal_channels.h
|
||||
│ ├── hal_files.h
|
||||
│ ├── hal.h
|
||||
│ ├── hal_ioblock.h
|
||||
│ ├── hal_mmcsd.h
|
||||
│ ├── hal_queues.h
|
||||
│ ├── hal_streams.h
|
||||
│ ├── i2c.h
|
||||
│ ├── i2s.h
|
||||
│ ├── icu.h
|
||||
│ ├── mac.h
|
||||
│ ├── mii.h
|
||||
│ ├── mmc_spi.h
|
||||
│ ├── pal.h
|
||||
│ ├── pwm.h
|
||||
│ ├── rtc.h
|
||||
│ ├── sdc.h
|
||||
│ ├── serial.h
|
||||
│ ├── serial_usb.h
|
||||
│ ├── spi.h
|
||||
│ ├── st.h
|
||||
│ ├── uart.h
|
||||
│ └── usb.h
|
||||
├── lib
|
||||
│ └── streams
|
||||
│ ├── chprintf.c
|
||||
│ ├── chprintf.h
|
||||
│ ├── memstreams.c
|
||||
│ ├── memstreams.h
|
||||
│ ├── nullstreams.c
|
||||
│ └── nullstreams.h
|
||||
├── osal
|
||||
│ ├── nil
|
||||
│ │ ├── osal.c
|
||||
│ │ ├── osal.h
|
||||
│ │ └── osal.mk
|
||||
│ ├── os-less
|
||||
│ │ └── ARMCMx
|
||||
│ │ ├── osal.c
|
||||
│ │ ├── osal.h
|
||||
│ │ └── osal.mk
|
||||
│ └── rt
|
||||
│ ├── osal.c
|
||||
│ ├── osal.h
|
||||
│ └── osal.mk
|
||||
├── ports
|
||||
│ ├── AVR
|
||||
│ ├── common
|
||||
│ │ └── ARMCMx
|
||||
│ │ ├── mpu.h
|
||||
│ │ ├── nvic.c
|
||||
│ │ └── nvic.h
|
||||
│ ├── KINETIS
|
||||
│ │ ├── K20x
|
||||
│ │ │ ├── hal_lld.c
|
||||
│ │ │ ├── hal_lld.h
|
||||
│ │ │ ├── kinetis_registry.h
|
||||
│ │ │ ├── platform.dox
|
||||
│ │ │ ├── platform.mk
|
||||
│ │ │ ├── pwm_lld.c
|
||||
│ │ │ ├── pwm_lld.h
|
||||
│ │ │ ├── spi_lld.c
|
||||
│ │ │ └── spi_lld.h
|
||||
│ │ ├── KL2x
|
||||
│ │ │ ├── hal_lld.c
|
||||
│ │ │ ├── hal_lld.h
|
||||
│ │ │ ├── kinetis_registry.h
|
||||
│ │ │ ├── platform.mk
|
||||
│ │ │ ├── pwm_lld.c
|
||||
│ │ │ └── pwm_lld.h
|
||||
│ │ ├── LLD
|
||||
│ │ │ ├── adc_lld.c
|
||||
│ │ │ ├── adc_lld.h
|
||||
│ │ │ ├── ext_lld.c
|
||||
│ │ │ ├── ext_lld.h
|
||||
│ │ │ ├── gpt_lld.c
|
||||
│ │ │ ├── gpt_lld.h
|
||||
│ │ │ ├── i2c_lld.c
|
||||
│ │ │ ├── i2c_lld.h
|
||||
│ │ │ ├── pal_lld.c
|
||||
│ │ │ ├── pal_lld.h
|
||||
│ │ │ ├── serial_lld.c
|
||||
│ │ │ ├── serial_lld.h
|
||||
│ │ │ ├── st_lld.c
|
||||
│ │ │ ├── st_lld.h
|
||||
│ │ │ ├── usb_lld.c
|
||||
│ │ │ └── usb_lld.h
|
||||
│ │ └── README.md
|
||||
│ ├── LPC
|
||||
│ ├── simulator
|
||||
│ └── STM32
|
||||
├── src
|
||||
│ ├── adc.c
|
||||
│ ├── can.c
|
||||
│ ├── dac.c
|
||||
│ ├── ext.c
|
||||
│ ├── gpt.c
|
||||
│ ├── hal.c
|
||||
│ ├── hal_mmcsd.c
|
||||
│ ├── hal_queues.c
|
||||
│ ├── i2c.c
|
||||
│ ├── i2s.c
|
||||
│ ├── icu.c
|
||||
│ ├── mac.c
|
||||
│ ├── mmc_spi.c
|
||||
│ ├── pal.c
|
||||
│ ├── pwm.c
|
||||
│ ├── rtc.c
|
||||
│ ├── sdc.c
|
||||
│ ├── serial.c
|
||||
│ ├── serial_usb.c
|
||||
│ ├── spi.c
|
||||
│ ├── st.c
|
||||
│ ├── uart.c
|
||||
│ └── usb.c
|
||||
└── templates
|
||||
├── adc_lld.c
|
||||
├── adc_lld.h
|
||||
├── can_lld.c
|
||||
├── can_lld.h
|
||||
├── dac_lld.c
|
||||
├── dac_lld.h
|
||||
├── ext_lld.c
|
||||
├── ext_lld.h
|
||||
├── gpt_lld.c
|
||||
├── gpt_lld.h
|
||||
├── halconf.h
|
||||
├── hal_lld.c
|
||||
├── hal_lld.h
|
||||
├── i2c_lld.c
|
||||
├── i2c_lld.h
|
||||
├── i2s_lld.c
|
||||
├── i2s_lld.h
|
||||
├── icu_lld.c
|
||||
├── icu_lld.h
|
||||
├── mac_lld.c
|
||||
├── mac_lld.h
|
||||
├── mcuconf.h
|
||||
├── osal
|
||||
│ ├── osal.c
|
||||
│ ├── osal.h
|
||||
│ └── osal.mk
|
||||
├── pal_lld.c
|
||||
├── pal_lld.h
|
||||
├── platform.mk
|
||||
├── pwm_lld.c
|
||||
├── pwm_lld.h
|
||||
├── rtc_lld.c
|
||||
├── rtc_lld.h
|
||||
├── sdc_lld.c
|
||||
├── sdc_lld.h
|
||||
├── serial_lld.c
|
||||
├── serial_lld.h
|
||||
├── spi_lld.c
|
||||
├── spi_lld.h
|
||||
├── st_lld.c
|
||||
├── st_lld.h
|
||||
├── uart_lld.c
|
||||
├── uart_lld.h
|
||||
├── usb_lld.c
|
||||
└── usb_lld.h
|
||||
|
|
@ -1,5 +1,3 @@
|
|||
#BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
#BOOTMAGIC_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
|
|
|
|||
|
|
@ -11,6 +11,34 @@
|
|||
#define _MEDIA 3
|
||||
#define _TILDE 4
|
||||
|
||||
//IS31 chip has 8 available led pages, using 0 for all leds and 7 for single toggles
|
||||
#define max_pages 6
|
||||
|
||||
enum ic60_keycodes {
|
||||
NUMPAD,
|
||||
FNAV,
|
||||
MEDIA,
|
||||
TILDE,
|
||||
CTLALTDEL,
|
||||
BACKLIGHT,
|
||||
BRIGHT,
|
||||
DIM,
|
||||
ALL,
|
||||
GAME,
|
||||
MODE_SINGLE,
|
||||
MODE_PAGE,
|
||||
MODE_FLASH
|
||||
};
|
||||
|
||||
uint8_t current_layer_global = 0;
|
||||
uint8_t led_mode_global = MODE_SINGLE;
|
||||
uint8_t backlight_status_global = 1; //init on/off state of backlight
|
||||
uint32_t led_layer_state = 0;
|
||||
|
||||
/* ==================================
|
||||
* KEYMAPS
|
||||
* ==================================*/
|
||||
|
||||
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Layer 0: Default Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
|
|
@ -30,17 +58,8 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_NO,\
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \
|
||||
TT(_FNAV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \
|
||||
F(1), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO, \
|
||||
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL \
|
||||
),
|
||||
|
||||
/* F-, arrow, and media keys */
|
||||
[_FNAV] = KEYMAP( \
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_NO,\
|
||||
KC_CAPS,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,_______,_______,KC_DEL, \
|
||||
_______,M(0),KC_BTN2,_______,_______,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,_______,_______, \
|
||||
_______,KC_APP,KC_BTN1,KC_CALC,_______,_______,KC_END,_______,_______,_______,_______,_______,KC_NO, \
|
||||
_______,_______,_______, _______, F(0),KC_NLCK,_______,_______ \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,F(TILDE),KC_NO, \
|
||||
KC_LCTL, KC_LGUI,KC_LALT, LT(_FNAV, KC_SPC), KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL \
|
||||
),
|
||||
|
||||
/* numpad */
|
||||
|
|
@ -49,15 +68,24 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
_______,_______,_______,_______,_______,_______,_______, KC_P4, KC_P5, KC_P6, KC_PAST, _______,_______,_______, \
|
||||
MO(_FNAV),_______,_______,_______,_______,_______,_______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______,_______, \
|
||||
_______,_______,_______,_______,_______,_______,_______, KC_P0,KC_COMM,KC_PDOT,KC_PPLS, _______,KC_NO, \
|
||||
_______,_______,_______, MO(_BASE), _______,_______,_______,_______ \
|
||||
_______,_______,_______, TO(_BASE), _______,_______,_______,_______ \
|
||||
),
|
||||
|
||||
/* F-, arrow, and media keys */
|
||||
[_FNAV] = KEYMAP( \
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_NO,\
|
||||
KC_CAPS,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,_______,_______,KC_DEL, \
|
||||
_______,_______,KC_BTN2,_______,_______,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,_______,_______, \
|
||||
_______,KC_APP,KC_BTN1,KC_CALC,_______,_______,KC_END,_______,_______,_______,_______,_______,KC_NO, \
|
||||
_______,_______,_______, _______, F(CTLALTDEL),KC_NLCK,_______,_______ \
|
||||
),
|
||||
|
||||
/* media */
|
||||
[_MEDIA] = KEYMAP( \
|
||||
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,\
|
||||
_______,_______,_______,_______,_______,_______,_______, _______, KC_UP, _______,_______, _______,_______,_______,\
|
||||
_______,_______,_______,_______,_______,_______,_______, KC_LEFT, KC_DOWN, KC_RGHT,_______, _______,_______, \
|
||||
_______,_______,F(2),F(3),_______,_______,_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO, \
|
||||
_______,F(MODE_SINGLE),F(MODE_PAGE),F(MODE_FLASH),_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,\
|
||||
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\
|
||||
_______,_______,_______,_______,_______,F(GAME),_______, _______, _______, _______,_______, _______,_______, \
|
||||
_______,_______,F(ALL) ,F(BRIGHT),F(DIM),F(BACKLIGHT),_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO, \
|
||||
_______,_______,_______, KC_MPLY, _______,_______, _______,_______ \
|
||||
),
|
||||
/* ~ */
|
||||
|
|
@ -85,58 +113,193 @@ enum function_id {
|
|||
|
||||
enum macro_id {
|
||||
ACTION_LEDS_ALL,
|
||||
ACTION_LEDS_GAME
|
||||
ACTION_LEDS_GAME,
|
||||
ACTION_LEDS_BACKLIGHT,
|
||||
ACTION_LEDS_BRIGHT,
|
||||
ACTION_LEDS_DIM,
|
||||
ACTION_LEDS_SINGLE,
|
||||
ACTION_LEDS_PAGE,
|
||||
ACTION_LEDS_FLASH
|
||||
};
|
||||
|
||||
/* ==================================
|
||||
* LED MAPPING
|
||||
* ==================================*/
|
||||
|
||||
/*
|
||||
Infinity60 LED MAP
|
||||
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
|
||||
28 31 32 33 34 35 36 37 38 41 42 43 44 45
|
||||
46 47 48 51 52 53 54 55 56 57 58 61 62
|
||||
63 64 65 66 67 68 71 72 73 74 75 76 77*
|
||||
78 81 82 83 84 85 86 87
|
||||
*Unused in Alphabet Layout
|
||||
*/
|
||||
|
||||
//======== full page arrays =========
|
||||
//any change in array size needs to be mirrored in matrix_init_user
|
||||
uint8_t led_numpad[16] = {
|
||||
18,21,22,23,
|
||||
37,38,41,42,
|
||||
55,56,57,58,
|
||||
72,73,74,75
|
||||
};
|
||||
//LED Page 2 - _Nav
|
||||
uint8_t led_nav[12] = {
|
||||
38,
|
||||
47,48, 55,56,57,
|
||||
64,65,66
|
||||
};
|
||||
//LED Page 3 - _Media
|
||||
uint8_t led_media[15] = {
|
||||
12,13,14, 23,24,25,
|
||||
65,66,67,68, 73,74,75,
|
||||
83, 86
|
||||
};
|
||||
//LED Page 4 - _Game "WASD"
|
||||
uint8_t led_game[5] = {
|
||||
11,
|
||||
32,
|
||||
47,48,51
|
||||
};
|
||||
|
||||
//======== qmk functions =========
|
||||
const uint16_t fn_actions[] = {
|
||||
[0] = ACTION_KEY(LALT(LCTL(KC_DEL))),
|
||||
[1] = ACTION_LAYER_MODS(_TILDE, MOD_LSFT),
|
||||
[2] = ACTION_FUNCTION(ACTION_LEDS_ALL),
|
||||
[3] = ACTION_FUNCTION(ACTION_LEDS_GAME)
|
||||
[CTLALTDEL] = ACTION_KEY(LALT(LCTL(KC_DEL))),
|
||||
[TILDE] = ACTION_LAYER_MODS(_TILDE, MOD_LSFT),
|
||||
[ALL] = ACTION_FUNCTION(ACTION_LEDS_ALL),
|
||||
[GAME] = ACTION_FUNCTION(ACTION_LEDS_GAME),
|
||||
[BACKLIGHT] = ACTION_FUNCTION(ACTION_LEDS_BACKLIGHT),
|
||||
[BRIGHT] = ACTION_FUNCTION(ACTION_LEDS_BRIGHT),
|
||||
[DIM] = ACTION_FUNCTION(ACTION_LEDS_DIM),
|
||||
[MODE_SINGLE] = ACTION_FUNCTION(ACTION_LEDS_SINGLE),
|
||||
[MODE_PAGE] = ACTION_FUNCTION(ACTION_LEDS_PAGE),
|
||||
[MODE_FLASH] = ACTION_FUNCTION(ACTION_LEDS_FLASH),
|
||||
};
|
||||
|
||||
/* custom action function */
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
(void)opt;
|
||||
msg_t msg;
|
||||
|
||||
switch(id) {
|
||||
case ACTION_LEDS_ALL:
|
||||
if(record->event.pressed) {
|
||||
// signal the LED controller thread
|
||||
chMBPost(&led_mailbox, LED_MSG_GAME_TOGGLE, TIME_IMMEDIATE);
|
||||
}
|
||||
break;
|
||||
case ACTION_LEDS_GAME:
|
||||
if(record->event.pressed) {
|
||||
// signal the LED controller thread
|
||||
chMBPost(&led_mailbox, LED_MSG_ALL_TOGGLE, TIME_IMMEDIATE);
|
||||
led_mode_global = led_mode_global == ALL ? MODE_SINGLE : ALL;
|
||||
msg=TOGGLE_ALL;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
}
|
||||
break;
|
||||
|
||||
case ACTION_LEDS_BACKLIGHT:
|
||||
if(record->event.pressed) {
|
||||
backlight_status_global ^= 1;
|
||||
msg=(backlight_status_global << 8) | TOGGLE_BACKLIGHT;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
}
|
||||
break;
|
||||
|
||||
case ACTION_LEDS_GAME:
|
||||
if(record->event.pressed) {
|
||||
led_mode_global = led_mode_global == GAME ? MODE_SINGLE : GAME;
|
||||
|
||||
msg=(4 << 8) | DISPLAY_PAGE;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
}
|
||||
break;
|
||||
|
||||
case ACTION_LEDS_BRIGHT:
|
||||
if(record->event.pressed) {
|
||||
msg=(1 << 8) | STEP_BRIGHTNESS;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
}
|
||||
break;
|
||||
|
||||
case ACTION_LEDS_DIM:
|
||||
if(record->event.pressed) {
|
||||
msg=(0 << 8) | STEP_BRIGHTNESS;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
}
|
||||
break;
|
||||
|
||||
//set led_mode for matrix_scan to toggle leds
|
||||
case ACTION_LEDS_SINGLE:
|
||||
led_mode_global = MODE_SINGLE;
|
||||
break;
|
||||
case ACTION_LEDS_PAGE:
|
||||
led_mode_global = MODE_PAGE;
|
||||
break;
|
||||
case ACTION_LEDS_FLASH:
|
||||
led_mode_global = MODE_FLASH;
|
||||
break;
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
}
|
||||
break;
|
||||
case 1:
|
||||
if (record->event.pressed) {
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
bool process_record_user (uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
// Runs just one time when the keyboard initializes.
|
||||
void matrix_init_user(void) {
|
||||
xprintf("init start");
|
||||
|
||||
led_controller_init();
|
||||
|
||||
// Write predefined led pages.
|
||||
write_led_page(_NUMPAD, led_numpad, 16);
|
||||
chThdSleepMilliseconds(10);
|
||||
|
||||
write_led_page(_FNAV, led_nav, 12);
|
||||
chThdSleepMilliseconds(10);
|
||||
|
||||
write_led_page(_MEDIA, led_media, 15);
|
||||
chThdSleepMilliseconds(10);
|
||||
|
||||
write_led_page(4, led_game, 5);
|
||||
chThdSleepMilliseconds(1000);
|
||||
};
|
||||
|
||||
// Runs constantly in the background, in a loop.
|
||||
// Loops constantly in the background.
|
||||
void matrix_scan_user(void) {
|
||||
uint8_t page;
|
||||
uint8_t led_pin_byte;
|
||||
msg_t msg;
|
||||
|
||||
};
|
||||
if (backlight_status_global == 0) {//backlight is off, skip the rest
|
||||
return;
|
||||
}
|
||||
|
||||
if (led_layer_state != layer_state && led_mode_global != GAME && led_mode_global != ALL) {
|
||||
//check mode
|
||||
//Turn on layer indicator or page depending on mode
|
||||
switch(led_mode_global) {
|
||||
case MODE_FLASH: //flash preset page leds then single indicator
|
||||
page = biton32(layer_state) > max_pages ? 7 : biton32(layer_state);
|
||||
msg=(page << 8) | DISPLAY_PAGE;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
chThdSleepMilliseconds(500);
|
||||
//flow to display single layer leds
|
||||
|
||||
case MODE_SINGLE: //light layer indicators for all active layers
|
||||
led_pin_byte = layer_state & 0xFF;
|
||||
msg=(7 << 8) | DISPLAY_PAGE;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
msg=(1 << 16) | (led_pin_byte << 8) | SET_FULL_ROW;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
break;
|
||||
|
||||
case MODE_PAGE: //display pre-defined led page
|
||||
page = biton32(layer_state) > max_pages ? 7 : biton32(layer_state);
|
||||
msg=(page << 8) | DISPLAY_PAGE;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
break;
|
||||
}
|
||||
led_layer_state = layer_state;
|
||||
}
|
||||
}
|
||||
|
|
|
|||
87
keyboards/infinity60/keymaps/jpetermans/readme.md
Normal file
87
keyboards/infinity60/keymaps/jpetermans/readme.md
Normal file
|
|
@ -0,0 +1,87 @@
|
|||
Backlight for Infinity60
|
||||
========================
|
||||
|
||||
## Led Controller Specs
|
||||
|
||||
The Infinity60 (revision 1.1a) pcb uses the IS31FL3731C matrix LED driver from ISSI [(datasheet)](http://www.issi.com/WW/pdf/31FL3731C.pdf). The IS31 has the ability to control two led matrices (A & B), each matrix controlling 9 pins, each pin controlling 8 leds. The Infinity only utilizes matrix A.
|
||||
|
||||
Infinity60 LED Map:
|
||||
digits mean "row" and "col", i.e. 45 means pin 4, column 5 in the IS31 datasheet
|
||||
```c
|
||||
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
|
||||
28 31 32 33 34 35 36 37 38 41 42 43 44 45
|
||||
46 47 48 51 52 53 54 55 56 57 58 61 62
|
||||
63 64 65 66 67 68 71 72 73 74 75 76 77*
|
||||
78 81 82 83 84 85 86 87
|
||||
```
|
||||
*Unused in Alphabet Layout
|
||||
|
||||
The IS31 includes 8 led pages (or frames) 0-7 than can be displayed, and each page consists of 144 bytes.
|
||||
- **bytes 0 - 17** - LED control (on/off).
|
||||
* 18 pins which alternate between A and B matrices (A1, B1, A2, B2, ..).
|
||||
* Each byte controls the 8 leds on that pin with bits (8 to 1).
|
||||
- **bytes 8 - 35** - Blink control.
|
||||
* Same as LED control above, but sets blink on/off.
|
||||
- **bytes 36 - 143** - PWM control.
|
||||
* One byte per LED, sets PWM from 0 to 255.
|
||||
* Same as above, the register alternates, every 8 *bytes* (not bits) between the A & B matrices.
|
||||
|
||||
## Led Controller Code
|
||||
In the Infinity60 project folder, led_controller.c sets up ability to write led layers at startup or control leds on demand as part of fn_actions. By default led_controller.c assumes page 0 will be used for full on/off. The remaining 7 pages (1-7) are free for preset led maps or single led actions at init or on demand. Communication with the IS31 is primarily done through the led_mailbox using chMBPost described further below under "Sending messages in Keymap.c". This code is based on work matt3o and flabbergast did for tmk firmware on the [whitefox](https://github.com/tmk/whitefox).
|
||||
|
||||
One function is available to directly set leds without the mailbox:
|
||||
```
|
||||
write_led_page(page#, array of leds by address, # of addresses in array)
|
||||
```
|
||||
This function saves a full page to the controller using a supplied array of led locations such as:
|
||||
```c
|
||||
uint8_t led_numpad[16] = {
|
||||
18,21,22,23,
|
||||
37,38,41,42,
|
||||
55,56,57,58,
|
||||
72,73,74,75
|
||||
}
|
||||
write_led_page(5, led_numpad, 16);
|
||||
```
|
||||
|
||||
Remaining led control is done through the led mailbox using these message types:
|
||||
- **SET_FULL_ROW** (3 bytes) - message type, 8-bit mask, and row#. Sets all leds on one pin per the bit mask.
|
||||
- **OFF_LED, ON_LED, TOGGLE_LED** (3 bytes) - message type, led address, and page#. Off/on/toggle specific led.
|
||||
- **BLINK_OFF_LED, BLINK_ON_LED, BLINK_OFF_LED** (3 bytes) - message type, led address, and page#. Set blink Off/on/toggle for specific led.
|
||||
- **TOGGLE_ALL** (1 byte) - Turn on/off full backlight.
|
||||
- **TOGGLE_BACKLIGHT** (2 bytes) - message type, on/off. Sets backlight completely off, no leds will display.
|
||||
- **DISPLAY_PAGE** (2 bytes) - message type, page to display. Switch to specific pre-set page.
|
||||
- **RESET_PAGE** (2 bytes) - message type, page to reset. Reset/erase specific page.
|
||||
- **TOGGLE_NUM_LOCK** (2 bytes) - message type, on/off (NUM_LOCK_LED_ADDRESS). Toggle numlock on/off. Usually run with the `set_leds` function to check state of numlock or capslock. If all leds are on (e.i. TOGGLE_ALL) then this sets numlock to blink instead (this is still a little buggy if toggling on/off quickly).
|
||||
- **TOGGLE_CAPS_LOCK** (2 bytes) - message type, on/off (CAPS_LOCK_LED_ADDRESS). Same as numlock.
|
||||
- **STEP_BRIGHTNESS** (2 bytes) - message type, and step up (1) or step down (0). Increase or decrease led brightness.
|
||||
|
||||
## Sending messages in Keymap.c
|
||||
Sending an action to the led mailbox is done using chMBPost:
|
||||
```
|
||||
chMBPost(&led_mailbox, message, timeout);
|
||||
```
|
||||
- &led_mailbox - pointer to led mailbox
|
||||
- message - up to 4 bytes but most messages use only 2. First byte (LSB) is the message type, the remaining three bytes are the message to process.
|
||||
- timeout is TIME_IMMEDIATE
|
||||
|
||||
An example:
|
||||
```c
|
||||
//set the message to be sent. First byte (LSB) is the led address, and second is the message type
|
||||
msg=(42 << 8) | ON_LED;
|
||||
|
||||
//send msg to the led mailbox
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
```
|
||||
|
||||
Another:
|
||||
```c
|
||||
msg=(46 << 8) | BLINK_TOGGLE_LED;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
```
|
||||
|
||||
Finally, SET_FULL_ROW requires an extra byte with row information in the message so sending this message looks like:
|
||||
```c
|
||||
msg=(row<<16) | (led_pin_byte << 8) | SET_FULL_ROW;
|
||||
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
|
||||
```
|
||||
|
|
@ -26,25 +26,28 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* In particular, I2C functions (interrupt-driven) should NOT be called from here.
|
||||
*/
|
||||
void led_set(uint8_t usb_led) {
|
||||
/*
|
||||
// PTA5: LED (1:on/0:off)
|
||||
GPIOA->PDDR |= (1<<1);
|
||||
PORTA->PCR[5] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
GPIOA->PSOR |= (1<<5);
|
||||
} else {
|
||||
GPIOA->PCOR |= (1<<5);
|
||||
}
|
||||
*/
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// signal the LED control thread
|
||||
msg_t msg;
|
||||
|
||||
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||
chSysUnconditionalLock();
|
||||
chMBPostI(&led_mailbox, LED_MSG_CAPS_ON);
|
||||
msg=(1 << 8) | TOGGLE_NUM_LOCK;
|
||||
chMBPostI(&led_mailbox, msg);
|
||||
chSysUnconditionalUnlock();
|
||||
} else {
|
||||
// signal the LED control thread
|
||||
chSysUnconditionalLock();
|
||||
chMBPostI(&led_mailbox, LED_MSG_CAPS_OFF);
|
||||
msg=(0 << 8) | TOGGLE_NUM_LOCK;
|
||||
chMBPostI(&led_mailbox, msg);
|
||||
chSysUnconditionalUnlock();
|
||||
}
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
chSysUnconditionalLock();
|
||||
msg=(1 << 8) | TOGGLE_CAPS_LOCK;
|
||||
chMBPostI(&led_mailbox, msg);
|
||||
chSysUnconditionalUnlock();
|
||||
} else {
|
||||
chSysUnconditionalLock();
|
||||
msg=(0 << 8) | TOGGLE_CAPS_LOCK;
|
||||
chMBPostI(&led_mailbox, msg);
|
||||
chSysUnconditionalUnlock();
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -17,13 +17,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
/*
|
||||
* LED controller code
|
||||
* WF uses IS31FL3731C matrix LED driver from ISSI
|
||||
* IS31FL3731C matrix LED driver from ISSI
|
||||
* datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
|
||||
*/
|
||||
|
||||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
#include "print.h"
|
||||
#include "led.h"
|
||||
#include "host.h"
|
||||
|
||||
#include "led_controller.h"
|
||||
|
||||
|
|
@ -53,11 +55,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
|
||||
*/
|
||||
|
||||
/* Which LED should be used for CAPS LOCK indicator
|
||||
* The usual Caps Lock position is C4-6, so the address is
|
||||
* 0x24 + (4-1)*0x10 + (8-1) = 0x59 */
|
||||
// Which LED should be used for CAPS LOCK indicator
|
||||
#if !defined(CAPS_LOCK_LED_ADDRESS)
|
||||
#define CAPS_LOCK_LED_ADDRESS 0x59
|
||||
#define CAPS_LOCK_LED_ADDRESS 46
|
||||
#endif
|
||||
|
||||
#if !defined(NUM_LOCK_LED_ADDRESS)
|
||||
#define NUM_LOCK_LED_ADDRESS 85
|
||||
#endif
|
||||
|
||||
/* Which LED should breathe during sleep */
|
||||
|
|
@ -83,14 +87,22 @@ uint8_t rx[1] __attribute__((aligned(2)));
|
|||
uint8_t full_page[0xB4+1] = {0};
|
||||
|
||||
// LED mask (which LEDs are present, selected by bits)
|
||||
// See page comment above, control alternates CA matrix/CB matrix
|
||||
// IC60 pcb uses only CA matrix.
|
||||
// Each byte is a control pin for 8 leds 8-1
|
||||
const uint8_t is31_ic60_leds_mask[0x12] = {
|
||||
// Each byte is a control pin for 8 leds ordered 8-1
|
||||
const uint8_t all_on_leds_mask[0x12] = {
|
||||
0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
|
||||
0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00
|
||||
};
|
||||
|
||||
// array to hold brightness pwm steps
|
||||
const uint8_t pwm_levels[5] = {
|
||||
0x00, 0x16, 0x4E, 0xA1, 0xFF
|
||||
};
|
||||
|
||||
// array to write to pwm register
|
||||
uint8_t pwm_register_array[9] = {0};
|
||||
|
||||
|
||||
/* ============================
|
||||
* communication functions
|
||||
* ============================ */
|
||||
|
|
@ -112,8 +124,8 @@ msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
|
|||
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
|
||||
}
|
||||
|
||||
msg_t is31_read_register(uint8_t b, uint8_t reg, uint8_t *result) {
|
||||
is31_select_page(b);
|
||||
msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
|
||||
is31_select_page(page);
|
||||
|
||||
tx[0] = reg;
|
||||
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, US2ST(IS31_TIMEOUT));
|
||||
|
|
@ -127,16 +139,9 @@ void is31_init(void) {
|
|||
__builtin_memset(full_page,0,0xB4+1);
|
||||
// zero function page, all registers (assuming full_page is all zeroes)
|
||||
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
|
||||
// disable hardware shutdown
|
||||
palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetPad(GPIOB, 16);
|
||||
chThdSleepMilliseconds(10);
|
||||
// software shutdown
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, 0);
|
||||
chThdSleepMilliseconds(10);
|
||||
// zero function page, all registers
|
||||
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
|
||||
chThdSleepMilliseconds(10);
|
||||
// software shutdown disable (i.e. turn stuff on)
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
|
||||
chThdSleepMilliseconds(10);
|
||||
|
|
@ -144,7 +149,7 @@ void is31_init(void) {
|
|||
uint8_t i;
|
||||
for(i=0; i<8; i++) {
|
||||
is31_write_data(i, full_page, 0xB4 + 1);
|
||||
chThdSleepMilliseconds(1);
|
||||
chThdSleepMilliseconds(5);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -159,134 +164,257 @@ static THD_FUNCTION(LEDthread, arg) {
|
|||
(void)arg;
|
||||
chRegSetThreadName("LEDthread");
|
||||
|
||||
uint8_t temp;
|
||||
uint8_t save_page, save_breath1, save_breath2;
|
||||
msg_t msg, retval;
|
||||
uint8_t i;
|
||||
uint8_t control_register_word[2] = {0};//2 bytes: register address, byte to write
|
||||
uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
|
||||
|
||||
//persistent status variables
|
||||
uint8_t pwm_step_status, page_status;
|
||||
|
||||
//mailbox variables
|
||||
uint8_t temp, msg_type;
|
||||
uint8_t msg_args[3];
|
||||
msg_t msg;
|
||||
|
||||
// initialize persistent variables
|
||||
pwm_step_status = 4; //full brightness
|
||||
page_status = 0; //start frame 0 (all off/on)
|
||||
|
||||
while(true) {
|
||||
// wait for a message (asynchronous)
|
||||
// (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
|
||||
// be processed right away)
|
||||
// be processed right away
|
||||
chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
|
||||
msg_type = msg & 0xFF; //first byte is action information
|
||||
msg_args[0] = (msg >> 8) & 0xFF;
|
||||
msg_args[1] = (msg >> 16) & 0XFF;
|
||||
msg_args[2] = (msg >> 24) & 0xFF;
|
||||
|
||||
// process 'msg' here
|
||||
switch(msg) {
|
||||
case LED_MSG_CAPS_ON:
|
||||
// turn caps on on pages 1 and 2
|
||||
is31_write_register(0, CAPS_LOCK_LED_ADDRESS, 0xFF);
|
||||
is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0xFF);
|
||||
is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0xFF);
|
||||
switch (msg_type){
|
||||
case SET_FULL_ROW:
|
||||
//write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write
|
||||
//writes only to currently displayed page
|
||||
write_led_byte(page_status, msg_args[1], msg_args[0]);
|
||||
break;
|
||||
case LED_MSG_CAPS_OFF:
|
||||
// turn caps off on pages 1 and 2
|
||||
is31_write_register(0, CAPS_LOCK_LED_ADDRESS, 0);
|
||||
is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
|
||||
is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
|
||||
|
||||
case OFF_LED:
|
||||
//on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page
|
||||
set_led_bit(msg_args[1], control_register_word, msg_args[0], 0);
|
||||
break;
|
||||
case LED_MSG_SLEEP_LED_ON:
|
||||
// save current settings
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
|
||||
// use pages 7 and 8 for (hardware) breathing (assuming they're empty)
|
||||
is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
|
||||
is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
|
||||
retval = MSG_TIMEOUT;
|
||||
temp = 6;
|
||||
while(retval == MSG_TIMEOUT) {
|
||||
// switch to the other page
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
|
||||
temp = (temp == 6 ? 7 : 6);
|
||||
// the times should be sufficiently long for IS31 to finish switching pages
|
||||
retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
|
||||
}
|
||||
// received a message (should be a wakeup), so restore previous state
|
||||
chThdSleepMilliseconds(3000); // need to wait until the page change finishes
|
||||
// note: any other messages are queued
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
|
||||
case ON_LED:
|
||||
set_led_bit(msg_args[1], control_register_word, msg_args[0], 1);
|
||||
break;
|
||||
case LED_MSG_SLEEP_LED_OFF:
|
||||
// should not get here; wakeup should be received in the branch above
|
||||
case TOGGLE_LED:
|
||||
set_led_bit(msg_args[1], control_register_word, msg_args[0], 2);
|
||||
break;
|
||||
case LED_MSG_ALL_TOGGLE:
|
||||
// read current page into 'temp'
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
||||
chThdSleepMilliseconds(1);
|
||||
// switch to 'the other' page
|
||||
if(temp==2) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
|
||||
|
||||
case BLINK_OFF_LED:
|
||||
//on/off/toggle single led, msg_args[0] = row/col of led
|
||||
set_led_bit(msg_args[1], control_register_word, msg_args[0], 4);
|
||||
break;
|
||||
case BLINK_ON_LED:
|
||||
set_led_bit(msg_args[1], control_register_word, msg_args[0], 5);
|
||||
break;
|
||||
case BLINK_TOGGLE_LED:
|
||||
set_led_bit(msg_args[1], control_register_word, msg_args[0], 6);
|
||||
break;
|
||||
|
||||
case TOGGLE_ALL:
|
||||
//turn on/off all leds, msg_args = unused
|
||||
is31_read_register(0, 0x00, &temp);
|
||||
led_control_reg[0] = 0;
|
||||
|
||||
//if first leds are already on, toggle frame 0 off
|
||||
if (temp==0 || page_status > 0) {
|
||||
__builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
|
||||
} else {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 2);
|
||||
__builtin_memset(led_control_reg+1, 0, 0x12);
|
||||
}
|
||||
is31_write_data(0, led_control_reg, 0x13);
|
||||
|
||||
if (page_status > 0) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
|
||||
|
||||
page_status=0;
|
||||
|
||||
//maintain lock leds
|
||||
led_set(host_keyboard_leds());
|
||||
}
|
||||
break;
|
||||
case LED_MSG_GAME_TOGGLE:
|
||||
// read current page into 'temp'
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
||||
chThdSleepMilliseconds(1);
|
||||
// switch to 'the other' page
|
||||
if(temp==1) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
|
||||
|
||||
case TOGGLE_BACKLIGHT:
|
||||
//msg_args[0] = on/off
|
||||
|
||||
//populate 9 byte rows to be written to each pin, first byte is register (pin) address
|
||||
if (msg_args[0] == 1) {
|
||||
__builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
|
||||
} else {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 1);
|
||||
__builtin_memset(pwm_register_array+1, 0, 8);
|
||||
}
|
||||
|
||||
for(i=0; i<8; i++) {
|
||||
//first byte is register address, every 0x10 9 bytes is A-matrix pwm pins
|
||||
pwm_register_array[0] = 0x24 + (i * 0x10);
|
||||
is31_write_data(0,pwm_register_array,9);
|
||||
}
|
||||
break;
|
||||
|
||||
case DISPLAY_PAGE:
|
||||
//msg_args[0] = page to toggle on
|
||||
if (page_status != msg_args[0]) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]);
|
||||
page_status = msg_args[0];
|
||||
|
||||
//maintain lock leds
|
||||
led_set(host_keyboard_leds());
|
||||
}
|
||||
break;
|
||||
|
||||
case RESET_PAGE:
|
||||
//led_args[0] = page to reset
|
||||
led_control_reg[0] = 0;
|
||||
__builtin_memset(led_control_reg+1, 0, 0x12);
|
||||
is31_write_data(msg_args[0], led_control_reg, 0x13);
|
||||
|
||||
//repeat for blink register
|
||||
led_control_reg[0] = 0x12;
|
||||
is31_write_data(msg_args[0], led_control_reg, 0x13);
|
||||
break;
|
||||
|
||||
case TOGGLE_NUM_LOCK:
|
||||
//msg_args[0] = 0 or 1, off/on
|
||||
set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status);
|
||||
break;
|
||||
case TOGGLE_CAPS_LOCK:
|
||||
//msg_args[0] = 0 or 1, off/on
|
||||
set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status);
|
||||
break;
|
||||
|
||||
case STEP_BRIGHTNESS:
|
||||
//led_args[0] = step up (1) or down (0)
|
||||
switch (msg_args[0]) {
|
||||
case 0:
|
||||
if (pwm_step_status == 0) {
|
||||
pwm_step_status = 4;
|
||||
} else {
|
||||
pwm_step_status--;
|
||||
}
|
||||
break;
|
||||
|
||||
case 1:
|
||||
if (pwm_step_status == 4) {
|
||||
pwm_step_status = 0;
|
||||
} else {
|
||||
pwm_step_status++;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
//populate 8 byte arrays to write on each pin
|
||||
//first byte is register address, every 0x10 9 bytes are A-matrix pwm pins
|
||||
__builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
|
||||
|
||||
for(i=0; i<8; i++) {
|
||||
pwm_register_array[0] = 0x24 + (i * 0x10);
|
||||
is31_write_data(0,pwm_register_array,9);
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//These relate to the LED map above, row and column
|
||||
//0x24 = first byte (CA1) of PWM page, 0x34 is 17th byte (CA2)
|
||||
/* LED game mode */
|
||||
const uint8_t led_game[72] = {
|
||||
0x24,
|
||||
0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x34,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x44,
|
||||
0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x54,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
|
||||
0x64,
|
||||
0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x74,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x84,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x94,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
};
|
||||
/* ==============================
|
||||
* led processing functions
|
||||
* ============================== */
|
||||
|
||||
/* ALL LEDs */
|
||||
const uint8_t led_all[72] = {
|
||||
0x24,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0x34,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0x44,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0x54,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0x64,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0x74,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0x84,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0x94,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
};
|
||||
void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uint8_t action) {
|
||||
//returns 2 bytes: led control register address and byte to write
|
||||
//action: 0 - off, 1 - on, 2 - toggle, 4 - blink on, 5 - blink off, 6 - toggle blink
|
||||
|
||||
/* =============
|
||||
* hook into TMK
|
||||
* ============= */
|
||||
uint8_t control_reg_addr, column_bit, column_byte, temp, blink_bit;
|
||||
|
||||
//check for valid led address
|
||||
if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
|
||||
return;
|
||||
}
|
||||
|
||||
blink_bit = action>>2;//check for blink bit
|
||||
action &= ~(1<<2); //strip blink bit
|
||||
|
||||
//led_addr tens column is pin#, ones column is bit position in 8-bit mask
|
||||
control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte
|
||||
control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register
|
||||
|
||||
is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte
|
||||
column_bit = 1<<(led_addr % 10 - 1);
|
||||
column_byte = temp;
|
||||
|
||||
switch(action) {
|
||||
case 0:
|
||||
column_byte &= ~column_bit;
|
||||
break;
|
||||
case 1:
|
||||
column_byte |= column_bit;
|
||||
break;
|
||||
case 2:
|
||||
column_byte ^= column_bit;
|
||||
break;
|
||||
}
|
||||
|
||||
//return word to be written in register
|
||||
led_control_word[0] = control_reg_addr;
|
||||
led_control_word[1] = column_byte;
|
||||
is31_write_data (page, led_control_word, 0x02);
|
||||
}
|
||||
|
||||
void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) {
|
||||
uint8_t led_control_word[2] = {0};//register address and on/off byte
|
||||
|
||||
led_control_word[0] = (row - 1 ) * 0x02;// A-matrix is every other byte
|
||||
led_control_word[1] = led_byte;
|
||||
is31_write_data(page, led_control_word, 0x02);
|
||||
}
|
||||
|
||||
void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) {
|
||||
uint8_t i;
|
||||
uint8_t pin, col;
|
||||
uint8_t led_control_register[0x13] = {0};
|
||||
|
||||
__builtin_memset(led_control_register,0,13);
|
||||
|
||||
for(i=0;i<led_count;i++){
|
||||
//shift pin by 1 for led register 0x00 address
|
||||
pin = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1;
|
||||
col = user_led_array[i] % 10 - 1;
|
||||
led_control_register[pin] |= 1<<(col);
|
||||
}
|
||||
|
||||
is31_write_data(page, led_control_register, 0x13);
|
||||
}
|
||||
|
||||
void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
|
||||
uint8_t temp;
|
||||
uint8_t led_control_word[2] = {0};
|
||||
|
||||
//blink if all leds are on
|
||||
if (page == 0) {
|
||||
is31_read_register(0, 0x00, &temp);
|
||||
chThdSleepMilliseconds(10);
|
||||
|
||||
if (temp == 0xFF) {
|
||||
led_action |= (1<<2); //set blink bit
|
||||
}
|
||||
}
|
||||
|
||||
set_led_bit(page,led_control_word,led_addr,led_action);
|
||||
}
|
||||
|
||||
/* =====================
|
||||
* hook into user keymap
|
||||
* ===================== */
|
||||
void led_controller_init(void) {
|
||||
uint8_t i;
|
||||
|
||||
xprintf("led_controller_init");
|
||||
/* initialise I2C */
|
||||
/* I2C pins */
|
||||
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
|
||||
|
|
@ -303,11 +431,17 @@ void led_controller_init(void) {
|
|||
/* initialise IS31 chip */
|
||||
is31_init();
|
||||
|
||||
/* enable LEDs on all pages */
|
||||
full_page[0] = 0;
|
||||
__builtin_memcpy(full_page+1, is31_ic60_leds_mask, 0x12);
|
||||
//set Display Option Register so all pwm intensity is controlled from page 0
|
||||
//enable blink and set blink period to 0.27s x rate
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME + IS31_REG_DISPLAYOPT_BLINK_ENABLE + 4);
|
||||
|
||||
/* set full pwm on page 1 */
|
||||
pwm_register_array[0] = 0;
|
||||
__builtin_memset(pwm_register_array+1, 0xFF, 8);
|
||||
for(i=0; i<8; i++) {
|
||||
is31_write_data(i, full_page, 1+0x12);
|
||||
pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
|
||||
is31_write_data(0, pwm_register_array, 9);
|
||||
chThdSleepMilliseconds(5);
|
||||
}
|
||||
|
||||
/* enable breathing when the displayed page changes */
|
||||
|
|
@ -315,47 +449,8 @@ void led_controller_init(void) {
|
|||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
|
||||
|
||||
/* Write pages */
|
||||
for(i=0; i<8; i++) {
|
||||
is31_write_data(1,(uint8_t *)(led_game+(9*i)),9);
|
||||
chThdSleepMilliseconds(5);
|
||||
is31_write_data(2,(uint8_t *)(led_all+(9*i)),9);
|
||||
chThdSleepMilliseconds(5);
|
||||
}
|
||||
|
||||
// clean up the capslock LED
|
||||
is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
|
||||
is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
|
||||
|
||||
/* more time consuming LED processing should be offloaded into
|
||||
* a thread, with asynchronous messaging. */
|
||||
chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
|
||||
chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
|
||||
}
|
||||
|
||||
//TODO: Don't know equivalent QMK hooks for these
|
||||
//
|
||||
//void hook_usb_suspend_entry(void) {
|
||||
//#ifdef SLEEP_LED_ENABLE
|
||||
// chSysLockFromISR();
|
||||
// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_ON);
|
||||
// chSysUnlockFromISR();
|
||||
//#endif /* SLEEP_LED_ENABLE */
|
||||
//}
|
||||
//
|
||||
//void hook_usb_suspend_loop(void) {
|
||||
// chThdSleepMilliseconds(100);
|
||||
// /* Remote wakeup */
|
||||
// if((USB_DRIVER.status & 2) && suspend_wakeup_condition()) {
|
||||
// send_remote_wakeup(&USB_DRIVER);
|
||||
// }
|
||||
//}
|
||||
//
|
||||
//void hook_usb_wakeup(void) {
|
||||
//#ifdef SLEEP_LED_ENABLE
|
||||
// chSysLockFromISR();
|
||||
// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_OFF);
|
||||
// chSysUnlockFromISR();
|
||||
//#endif /* SLEEP_LED_ENABLE */
|
||||
//}
|
||||
//*/
|
||||
|
|
|
|||
|
|
@ -26,12 +26,15 @@ msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size);
|
|||
msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data);
|
||||
msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result);
|
||||
|
||||
/* =========================
|
||||
* init functions
|
||||
* ========================= */
|
||||
/* ============================
|
||||
* init functions/definitions
|
||||
* ============================*/
|
||||
|
||||
void led_controller_init(void);
|
||||
|
||||
#define CAPS_LOCK_LED_ADDRESS 46 //pin matrix location
|
||||
#define NUM_LOCK_LED_ADDRESS 85
|
||||
|
||||
/* =============================
|
||||
* IS31 chip related definitions
|
||||
* ============================= */
|
||||
|
|
@ -55,7 +58,7 @@ void led_controller_init(void);
|
|||
|
||||
#define IS31_REG_DISPLAYOPT 0x05
|
||||
#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
|
||||
#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
|
||||
#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x08
|
||||
// D2:D0 bits blink period time (*0.27s)
|
||||
|
||||
#define IS31_REG_AUDIOSYNC 0x06
|
||||
|
|
@ -82,20 +85,35 @@ void led_controller_init(void);
|
|||
|
||||
#define IS31_TIMEOUT 10000 // needs to be long enough to write a whole page
|
||||
|
||||
/* ==============================
|
||||
* LED Thread related definitions
|
||||
* ============================== */
|
||||
/* ========================================
|
||||
* LED Thread related items
|
||||
* ========================================*/
|
||||
|
||||
extern mailbox_t led_mailbox;
|
||||
|
||||
void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action);
|
||||
void set_lock_leds (uint8_t led_addr, uint8_t led_action, uint8_t page);
|
||||
void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte);
|
||||
void write_led_page (uint8_t page, uint8_t *led_array, uint8_t led_count);
|
||||
|
||||
// constants for signaling the LED controller thread
|
||||
enum led_msg_t {
|
||||
LED_MSG_CAPS_ON,
|
||||
LED_MSG_CAPS_OFF,
|
||||
LED_MSG_SLEEP_LED_ON,
|
||||
LED_MSG_SLEEP_LED_OFF,
|
||||
LED_MSG_ALL_TOGGLE,
|
||||
LED_MSG_GAME_TOGGLE
|
||||
KEY_LIGHT,
|
||||
SET_FULL_ROW,
|
||||
OFF_LED,
|
||||
ON_LED,
|
||||
TOGGLE_LED,
|
||||
BLINK_OFF_LED,
|
||||
BLINK_ON_LED,
|
||||
BLINK_TOGGLE_LED,
|
||||
TOGGLE_ALL,
|
||||
TOGGLE_BACKLIGHT,
|
||||
DISPLAY_PAGE,
|
||||
RESET_PAGE,
|
||||
TOGGLE_NUM_LOCK,
|
||||
TOGGLE_CAPS_LOCK,
|
||||
TOGGLE_BREATH,
|
||||
STEP_BRIGHTNESS
|
||||
};
|
||||
|
||||
#endif /* _LED_CONTROLLER_H_ */
|
||||
|
|
|
|||
Loading…
Reference in a new issue