* Fix issues with user split transport code
* Improve OLED (More font stuff, improved keylogger, etc)
* Add `KEYLOCK` macro to disable USB, borrowed from command feature.
* Convert Kyria fully to proton C (no more AVR kyria)
* Add Work Louder Work Board keymap
* Fill the oleds with right mods
* Enable double mods on x32 oleds
* Disable forced NKRO
* Make oleds fancy only on good MCUs
* Overhaul oled display
* Further enhance oled, with kitty!
* Final oled form
* Not working transport
* Transport id of woring
* Add acceleration
* fix button placement for accel macro
* Fix accelartion location and behavior
* Remove OLED sync code
* Fix alignment issue
* Remove audio hack
* Fix up zima keymap
* Add matrix slave scan function and cleanup drashna.h
* Clean up user space
* Allow userspace sync to be disable-able
* Fix weird issue with audio
* Fix alignment issue with user split sync
* Disable second rgb matrix task
* Disable additional animations
* Change dynamic keymap settings
* Hacky fix for borked corne
* Add Blackpill (F411) support to tractyl manuform
* remove manual via eeprom reset
* Remove all references to rgblight twinkle
* Fix issues with config processing
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
Fix reddit link
Duplicate open parenthesis next to close parenthesis on NSSL
Add customisation instructions
Add lily58
Add gergo
Co-authored-by: Jonathan Dayton <jonathandayton23@gmail.com>
Clean up LAYOUT macro formatting
Add alternative vi-style navigation layout
Add kyria
Add minidox
Change order of keyboards
Add iris
Expand TOC
Re-order userspace subheadings
Add atreus
Add customisation section
Add split_3x5_3 and split_3x6_3 layouts
Add for_science
Fix wrong paths in keyboard config.h and keymap.c headings
Fix keyboard ordering
Fix blank lines around headings
Add compatibility with new org-mode version.
Remove keyboards/crkbd now covered by layouts/split_3x6_3
Add Halmak
Alphabetise alternative alpha arrangements
Move build options out of base layer alphas headings
Add list of keyboards supporting split_3x5_3 layout
Enable Auto Shift and Retro Shift
Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)
Change kyria thumb key mapping
Add planck_mit layout
Remove alternative bottom row support from ortho_4x12
Remove minidox
- Covered by split_3x5_3 layout
Add moonlander
Remove KC_ macros
Add 60_ansi layout
Add ortho_5x15 layout
Closesmanna-harbour/qmk_firmware#5
Co-authored-by: Rob <rob@debank.tv>
Fix typo (manna-harbour/qmk_firmware#7)
Author: sonnius <sonnius@users.noreply.github.com>
Add redox_w (manna-harbour/qmk_firmware#8)
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>
Add AUTO_SHIFT_NO_SETUP to reduce firmware size
Update image paths
Add instructions to checkout development branch
Add kyria extended thumbs option, change default, add KLE
Change clipboard keys
- Change order to be mirror of windows bindings
- Change default to use CUA bindings for Cut, Copy, and Paste, and Fun Cluster
bindings for Undo and Redo
- Add alternative bindings
- Fun Cluster (original miryoku bindings)
- Mac
- Windows
- Change prefix for local macros from X_ to U_
Disable Retro Shift, enable Auto Shift for non-alphas
Revert "Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)"
Add Experimental Features section
Update miryoku image link
Update cover image link
Add dactyl_manuform/4x5
Add cutomisation examples
Add https to remote example
Fix dactyl_manuform/4x5 subset mapping
Add extended thumbs to ortho_4x12
Update Colemak Mod-DH naming
Closesmanna-harbour/qmk_firmware#13
Add dactyl_manuform/5x6
Resolvesmanna-harbour/qmk_firmware#14
Co-authored-by: Sebastian Morales <sebastian.moralesd@gmail.com>
Add note on FORCE_LAYOUT
- Needed to use EXTENDED_THUMBS on planck
Add parent directories to keyboard headings and re-order
Add keyboardio/atreus
Resolvesmanna-harbour/qmk_firmware#15
Add torn
Resolvesmanna-harbour/qmk_firmware#16
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>
Change map to zip
- Adds support for python3, still compatible with python2.
Resolvesmanna-harbour/qmk_firmware#10Resolvesmanna-harbour/qmk_firmware#19
Co-authored-by: Ori <ori@oribarbut.com>
Add python-version
Add sofle
Add ergotravel
Add ortho_5x12
Add ortho_4x10
Add :main no header argument to C code blocks
resolvesmanna-harbour/qmk_firmware#11resolvesmanna-harbour/qmk_firmware#12
Co-authored-by: RubioJr9 <u0893472@utah.edu>
Add flipped layers and inverted-T nav alternative layouts
- Separate tap_table into alphas_table and thumbs_table
- Add mode argument to table-layout-half
- Remove layer_name
- Rename layers
- Add mods and clipboard to MBO and mirror
- Add MIRYOKU_LAYERS=FLIP
- Add MIRYOKU_NAV=INVERTEDT
Add layer diagrams
Update contact section
Update links for Bilateral Combinations and Retro Shift
Add description and no reverse angle option to 60_ansi layout
Update list of keyboards supporting community layouts
- and example build command lines
Change moonlander thumb keys
Update list of keyboards supporting split_3x5_3
Add license to tangled C source files
* Add Per Key functionality for AutoShift (#11536)
* LED Matrix: Reactive effect buffers & advanced indicators (#12588)
* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)
* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)
* LED Matrix: Split (#12633)
* [CI] Format code according to conventions (#12650)
* feat: infinite timeout for leader key (#6580)
* feat: implement leader_no_timeout logic
* docs(leader_key): infinite leader timeout docs
* Format code according to conventions (#12680)
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)
* Add support for MCU = STM32F446 (#12619)
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
* Format code according to conventions (#12682)
* Format code according to conventions (#12687)
* Add STM32L433 and L443 support (#12063)
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
* Include L443 in compatible microcontrollers
* Update config bootloader jump description
* Update ChibiOS define reasoning
* Update quantum/mcu_selection.mk
* fix git conflict
* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)
* Fix bad PR merge for #6580. (#12721)
* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)
* [CI] Format code according to conventions (#12731)
* Fixing transport's led/rgb matrix suspend state logic (#12770)
* [CI] Format code according to conventions (#12772)
* Fix comment parsing (#12750)
* Added OLED fade out support (#12086)
* fix some references to bin/qmk that slipped in (#12832)
* Resolve a number of warnings in `qmk generate-api` (#12833)
* New command: qmk console (#12828)
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
* Remove pointless SERIAL_LINK_ENABLE rules (#12846)
* Make Swap Hands use PROGMEM (#12284)
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* Fix another bin/qmk reference (#12856)
* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)
* Fixup build errors on `develop` branch. (#12723)
* LED Matrix: Effects! (#12651)
* Fix syntax error when compiling for ARM (#12866)
* Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)
* Rename `point_t` -> `led_point_t` (#12864)
* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)
* Add missing LED Matrix suspend code to suspend.c (#12878)
* LED Matrix: Documentation (#12685)
* Deprecate `send_unicode_hex_string()` (#12602)
* Fix spelling mistake regarding LED Matrix in split_common. (#12888)
* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)
* Use milc.subcommand.config instead of qmk.cli.config (#12915)
* Use milc.subcommand.config instead
* pyformat
* remove the config test
* Add function to allow repeated blinking of one layer (#12237)
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
* Fixup housekeeping from being invoked twice per loop. (#12933)
* matrix: wait for row signal to go HIGH for every row (#12945)
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* ensure we do not conflict with existing keymap aliases (#12976)
* Add support for up to 4 IS31FL3733 drivers (#12342)
* Convert Encoder callbacks to be boolean functions (#12805)
* [Keyboard] Fix Terrazzo build failure (#12977)
* Do not hard set config in CPTC files (#11864)
* [Keyboard] Corne - Remove legacy revision support (#12226)
* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)
* Add Full-duplex serial driver for ARM boards (#9842)
* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)
* Backlight: add defines for default level and breathing state (#12560)
* Add dire message about LUFA mass storage bootloader (#13014)
* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)
Was causing compiler errors on some systems.
* Fix keyboards/keymaps for boolean encoder callback changes (#12985)
* `backlight.c`: include `eeprom.h` (#13024)
* Add changelog for 2021-05-29 Breaking Changes merge (#12939)
* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version
* Add recent develop changes
* Sort recent develop changes
* Remove sections for ChibiOS changes per tzarc
No ChibiOS changes this round.
* Add and sort recent develop changes
* add notes about keyboard moves/deletions
* import changelog for PR 12172
Documents the change to BOOTMAGIC_ENABLE.
* update section headings
* re-sort changelog
* add additional note regarding Bootmagic changes
* remove changelog timestamp
* update dates in main Breaking Changes docs
* fix broken section anchors in previous changelogs
* add link to backlight/eeprom patch to changelog
* highlight some more changes
* link PRs from section headers
* Restore standard readme
* run: qmk cformat --core-only
* Update other keyboards for rgb matrix changes
* Remove customized bootmagic code
* Fix corne layout compilation error
* Fix compiler errors with all keymaps
* Add Simple Visualizer for ergodox infinity
* Fix compile issue with Corne
* Fix keymap stuff
* Add alias for mouse layer
* Add Halmak Keyboard layout
* Updates for Kyria
* Add support for oled interval
* Change RGB stuff
[CHANGE] Fix coexistence issues
* Fix rgb_stuff
* Add custom ploopyco mouse keymap
* Decrease default dwell time
* Updates based on last breaking changes update
* Disable command on dactyl
* Update ergodox to use proper commands for rgb matrix indicators
* Update all rgb matrix indicator functions
* Update rules for dactyl-manuform
* Reduce wait time for mouse layer off event
* Add more info to logger
* Add wrappers for get_tapping term
* Move version.h include into only file that actually needs it
* Update rgb sleep stuff
* Update key print function
* Change DM keymap settings
* Change pin for DM Manuform
* Add Proton C stuff for Corne keymap
* more arm corne tinkering
* Even more arm stuff for corne
* Cleanup corne stuff
* redirect default keymap to drashna
because I am a very bad man
* change corne rgb priority
* Update tractyl manuform to not conflict
* Add more secret stuff
* more dactyl tweaks
* Add more options to split transport
* Changes of oled support
* Change split settings
* Improve keylogger formatting more
* tweak oled stuff
* Oled and such tweaks
* Reduce brightness due to leds
* Decrease brightness more
* Only run layer code if master
* Reset everything to upstream, reapply Bocaj changes
* Bocaj - address PR comments
* Just in time changes
* Bocaj - Several adjustments after using the layout for a while
* Add Launchpad keymap
Note: RGB and Audio won't work when using B pins for audio
* Add support for rgb matrix on launchpad
* Update config for launchpag
* Disable wait on layer change
* Update config for ErgoDox EZ
* Fixup rgb light userspace code
* Move Corne layout to community layouts folder
* Update config for corne to support community layouts
* Add license header to files
* Minor cleanup of userspace config
* Update Pimironi Trackball code
* Increase debounce time on ergodox
* Fix keymap handling
* Enable wait for USB for moonlander
* Update/add license headers
* fix review issues
* First pass at manuform layout.
* Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer.
* Use a 32-bit timer that can actually hit 5 minutes.
* Some updates after a day of usage:
* Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes.
* Turn off the OLEDs after 5 minutes
* Move the keys around a bit.
* Add many more quotes.
* Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots.
* Revert osm on lgui as it makes start menu search impossible to use.
* Use LTO_ENABLE flag.
* License all of my (333fred's) keymaps as MIT.
* Update users/333fred/rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
OLED Display fixes
Add support for RGBLIGHT Layers
Add gaming layer to corn and kyria
RGBLight Startup Animation fixes and improvements (uses matrix_scan now!)
Pimoroni Trackball support added (IT'S RGB!!!)
Fix issues due to code changes
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* Changes to my Ergodox & Planck keymaps
* Fixed Typos
Corrected some typos and omissions to my Ergodox layout and readme
* Fixed Typos
Fixed some typos in my ErgoDox Readme and keymap.c files
* Enable External EEPROM on Planck Rev6
* Update KC_MAKE macro to use qmk cli util
* Disable additional gradients for rgb matrix
* Update analog code for newer methods
* Update ergodox layout
* Disable Grave Escape
* Cleanup OLED code a bit
* Remove old unicode code
* Seperate RGB Matrix code from RGB Light code in userspace
* Massive overhaul an generalization of personal OLED code
Now lets hope I NEVER get a keyboard using a 128x32 in a normal orientation.
* Super tiny cleanup
* Enable Diablo layer on kyria
* clang format pass
* Additional OLED cleanup
* Use TAPPING_TERM constant (and redefine value to 200ms)
* change TAPPING_TOGGLE to 2 to require two taps to lock in layer 4
* add support for Shift-Command 3/4/5 key combinations that are used in
macOS Catalina
* avoid false positive tap detecion for RMOD3 when the whole sequence of
pressing RMOD3, tapping another key and releasing RMOD3 took less than
TAPPING_TERM milliseconds.
* replace SEND_STRING with tap_code()/tap_code16(), saving ~860 bytes in
compiled firmware size.
* ifdef rgb stuff like a madman for RGB Coexistance
* Re-enable RGB Light on Planck
* fix RGB Coexistance issue
* Tweak feature settings for Ergodox EZ Glow
* Their powers combine, and I am Captain RGB
This one is for noroadsleft and yan.
* Limit brightness when both RGB features are enabled
* Change shutdown method
* Add RGB Coexistience stuff to keymap
* disable RGBLIGHT_SLEEP until a solution can be found
* Disable Unicode on the kyria
* Fix up Iris rev defines
* Fix up community layouts to compile properly
* Cleanup rgb stuff
* Merge ergodox keymaps
* Update CCCV macro to use tap_code16
* Enable Solenoid on C39
Because josh couldn't
* Enable RGB Light, not Matrix on rev6 keymap
* Only enable LTO on non-ARM boards
* Clean up Bootmagic OLED display
* Enable RGBLIGHT_SPLIT on kyria
Not that it does anything
* Add hotkey for discord
* Display logo for caps lock indication on crkbd using old OLED driver
* Add emacs read-only mode file variable to generated files
* use LTO_ENABLE instead of EXTRAFLAGS
This enables the same option, and disables action_macros, and action_functions, both of which seem to break when LTO is enabled. And this is a lot simpler to use.
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Add Kyria Keymap
* Enable all RGBLIGHT Animations for ARM and high capacity AVR
* Reduce GNUC version for __has_include
* Cleanup Ortho 4x12 Community layout
* Update Collide 39 keymap
* Cleanup Keymaps
* Enable full 30 LEDs for Ergodox
* Change EEPROM Load timing
* Use RGB Matrix on Planck Rev6
* Use correct keymap swap
* Enable everything for ARM
* Only enable rgb sleep on avr until crash is fixed
* Add additional Kyria keymap config
* Overhaul Kyria OLED display
* Improve kyria keymap based on usage
* Minor tweaks to rules
* Update OLED code to truncate properly
* Fix RGB Light layer indication
* Switch all of biton32 to get_highest_layer function
* Fix OLED Keylogger display
* Run qmk cformat over all of my user files
* Slight tweak to kyria based on usage
* Move around LALT_T config
* Add comments about base wrappers to keymaps
* Another cformat pass
* Temp fix for VUSB boards and NKRO
* Convert tabs to spaces in rules.mk files
* Only enable RGBLight if it's enabled
* Add Encoder Flip setting
* Update OLED font file
* Add issmirnov {user, ergodox, levinson} files.
There are enough interesting QMK tricks in these layouts that it seems
worth it to share with the broader community. Big thanks to Drashna for
inspiration, as well as all the wonderful creators of QMK documentation.
Some highlights:
- Common layout shared between levinson and ergodox_ez
- TAP_TOG macro for fast layer switching
- Autogenerated keymaps ascii art with git hooks
I will do my best to do periodic rolls here, but the source of truth
will always be https://github.com/issmirnov/qmk-keebs
* Incorporate review feedback.
- Remove CLEAR_EEPROM in favor of built in EEP_RST
- Remove custom handlers for audio on bootup and shutdown
- Remove plethora of unneeded includes
- Remove deprecated and dupliated config options
HUGE thanks to drashna for the review!
* Apply suggestions from code review
Huge thanks to drashna@ for a very thorough review and the very useful suggestions.
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Remove unclear optimization
This was an artifact from some other keymap I saw.
* Change RGBLight pin for Planck Light
Move it to A0, so that the SPI? pins are available for BT hackery
* Add QMK DFU bootloader info
* Add Solenoid
* Disable annoying white LED on bottom
* Enable Solenoid on Corne
* Remove bounds for animations
* Increase debounce for Ergodox EZ to reduce repeat key issues
* Set swap hands key to be a hold-tap key
This way, it's not ANNOYING and doesn't swap the hands inteniontally
* Move MT Alt in Corne keymap
* Re-Add fine tuned control of secrets
* Squash mods to single row
* Add LRA settings to haptic feedback settings for Rev6
* Fix issue with non-Planck EZ keymaps
* Add 40 Percent Nano with Analog Joystick
* Add Collide39 keymap
* Fix OLED printing to be more flavorful
* Fix up Iris GamePad and come cleanup
* Expand OLED char map further
* Add modded characters to keylogger
* Here be dragons
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Fix up rules for community layouts
* Some more OLED tweaks
* Add mod mask check function
* Change QMK DFU Audio pin to be correct
* Use manual STM config instead of CTPC for Collide 39
* Add a quefrency keymap
* New Alt-ernate layouts
* Enable Per Key Tapping Term to preserve sanity
* Use underglow and mod lights for status on Corne
* Update the drashna_ms keymap for quefrency
* Disable Audio since there isn't enough space
* Update KC_MAKE to ues :flash target
* Cleanup ergodox layout
* Enable i2c support for Iris
* Add keymap support for CG_SWAP
* Enable RGB Matrix Shutdown mode
* enable heatmap
* Update gitlab CI to install python3
* Remove game macros
These are no longer needed, and haven't been used in ages
* Cleanup planck layout
* Add RGB Matrix fun and RGB cleanup
* Add keycode and config for RGB Matrix idle animations
* Clean up rgb idle animation code
* Add rgb idle keycode to keymaps
* Fix issues with rgb matrix idle animation
* Fix some handling for idle animation
* Reduce idle animation timeout to 15s to be more reasonable
* fix up rgb stuff
* Fix isses with rgb functions not being called for matrix
* Use custom EEPROM Magic Number so testing is easier
* Extend Default Layer macro to support a lot more layers
* Fix bjohnson macropad
* Adjust KC_MAKE to process mods for more consistent behavior
* Fix up rgb stuff on corne
* Corne OLED Overhaul
* Fixes a number of issues with weirdness.
* Fixes issues with keylogger (should be more reliable now)
* Modulaize the OLED render sections
* Rewrite layer display code
* Update URL for Font Editor
Due to odd issues, I ended up rewriting from scratch. And using PROGMEM versions, since I think I was getting memory overflows.
* Update polling rate on all keebs
* Fix planck ez layout config
* Remove macros from Viterbi
* Fix my Tap Dance issues after I broke them
* Cleanup and organization of userspace documentation
As well as some additional cleanup of functions due to review of documentation.
* Enable Tapdance on Glow and remove more animations
* Revert to Eager PR debouncing
* Add better check for startup animation
* Move where RGB Matrix defines are listed
* Limit RGB Matrix max val
* Update keyboard for Iris Rev 3 conflicts
* Enable encoder support on planck ez
* Remove is_master check from corne\'s OLED code
* Overhaul OLED screens for my Corne
* One last removal
* Show RGB valu On both sides
* Updates for OLED display info
* Fix compile issues for rgb config
* Disabled Space Cadet for all drashna keymaps
* Fix OLED Screen configs
* Minor OLED Tweaks
* Revert some Iris changes
* Fix song include
* Handle MAKE macro for the Corne boards better
* Add super hacky-hack for eeconfig initialization
* Add audio support for Fractal since Elite Cs support it
* Add defines for keycode steps
* Add White layout
* Update Corne RGB info
* Add fun effects to layer indication for RGB Matrix enabled boards
* Use proper define for product name detection
* Update formatting
* Use custom timeout mechanism for OLED timeout
* Fix up OLED screen HSV code for new HSV structure
* Better handle turning off RGB Matrix when sleeping
* Disable MultiSplash Animation
* Change Iris back to using serial
* Why was RGB disabled?!?!?!
* Limit val in rgb_matrix_layer_helper function
* Remove EECONFIG setting for RGB matrix
* [Keymap] iris@nstickney: improve RGB init
Perfecting the rgb backlight initialization with a delay for each
color; also start and stop the animation at the "default layer"
color.
* [Keymap] iris,ergodox@nstickney fix FN on SYMB
The function key was not operational on the SYMB and SYSH layers due
to other keycodes being mapped over MO() on those layers. The
offending keycodes have been moved to other keys.
* [Keymap] add @nstickney's userspace
Pulled common code out to a userspace directory for my iris and
ergodox keymaps.
* [Keymap] iris@nstickney add image to README
Added an image from keyboard-layout-editor.com to meet the README
standard.
* iris@nstickney hue values now `uint8_t` (#6050)
This is a Neo2 inspired layout that is meant to be fully usable on
MacOS when used with the default US QWERTY/ABC Extended keymap.
Neo2 layers 1-4 have been almost fully implemented in hardware.
Layers 5 and 6 (greek and mathematical symbols) have been left
out for now as most of them aren't available on the default
keymaps.
Layer toggling for layer 3 on the right hand side utilizes a
tap-toggle approach that is a combination of MO & LT macros.
This is required to allow sending Y when tapped, @ when tapped
while the SHIFT modifier is active and support momentarily
toggling the layer while the key is held.
* trying to make my global keymap
* refactoring the old keymap using userspace
* getting there
* move readme and remove community layout
* use pragma once instead of ifndefs
* just make iris work
* iris decent
* better naming
* add some modifiers on the home row
* use symbol and sysctl layers
* fix up
* a bit faster
* add < and > on symbol layer
* apparently im not using z all that much..
* okok
* fix up stuff
* led init is back
* bring back led indicators
* Update keyboards/ergotravel/keymaps/pvinis/config.h
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* not needed
* not needed
* delete these for now, until I use the userspace code
* remove katamari from here. made a new pr for it
* lower case
* drashna suggestion :)
* move files to correct place
* fix missing command
* clean up rgb matrix extern usage
Moved rgb matrix boiler plate into macros
Rebased onto typing heatmap pr
* Fixing the reversed frame buffer access in digital rain
* Fixing digital rain & typing heatmap if keyreactive effects are not enabled
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Adding parenthesizes to DRIVER_LED_TOTAL where necessary
* Updated docs
* added notes about parentheses
* Initial conversion of the rgb_led struct
* Converting last keyboard & updating effects to take advantage of the new structure
* New struct should not be const
* Updated docs
* Changing define ___ for no led to NO_LED
* Missed converting some keymap usages of the old struct layout
* Disable a bunch of reactive modes
* Enable rgb matrix for Corne Keyboard
* Convert CRKBD to rgb matrix
* Add Gergo keyboard layout
* Make Diablo 3 tap dance better
* Add basic support for Planck EZ
* Fix RGB Matrix stuff
* Fix keycodes for Planck EZ
* Update CRKBD OLED stuff
* Fix typo for sleep on ergodox glow
* Improve my gergo layout
* Scrolling OLED key logger!
* Change gergo layout
* Hnadle unicode keycodes if unicode is disabled
* Disable COMMAND/CONSOLE for gergo
* Fix right side control
* Re-enable LTO for all platforms
Since I got updated arm gcc binaries that no longer error out on lto
* Update formatting to match newer community standards
Poor 2 space
* Re-alight startup animation to use new HUE range
* Streamline gitlab ci scripts
* Disabled Space Cadet
* Add support for breathing table
* Enable new LTO Option
And clean up defines that will now be repeatitive
* Remove vscode settings
* Additional formatting cleanup of config.h files
* Start to standardize macro timer
* Update Fractal layout
Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front
* Update Iris keymap to use I2C for transport
* Remove TAP_CODE_DELAY from keyboard in favor of global setting
* Remove Woodpad
Since it\'s no longer in my possession
* Only enable LTO on AVR boards
* Run matrix_scans while doing startup light
* Run matrix_scan to get split keyboard code synced properly
* Fix rgb mode
* Remove custom debouncing settings
* Make RGB Light Startup Animation optional
* Fix opt def
* Remove extra tap code delay value
* Fix references to keebio boards
* Add support for LP Iris keyboard
* Add backlight code
* Make startup animation optional
* Update gitlab ci script
* Remove port declaration
* Revert avrgcc changes to gitlab ci file
* Don't re-set mods
* Remove MACRO_TIMER define
* Add custom name for crkbd
* Add name for Prime M pad
* Add names for ortho 4x12 boards
* Add some additional handling for rgb init
* Change thumb clusters on ergodox
* Switch Orthodox to I2C
* Fix Space in ergodox keymap
* Use OSL for ergodox layout
* Ugh, can't find a good layout
* Fix typo
* Fix up animation startup
* Cries in AVR
* Fix makefiles for ergodox ez boards
* Add support for "secret songs" in my userspace
* Reset debounce to 5ms for Ergodox EZ
* Fix gitlab CI yaml file
* More crying in AVR
* Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged
* Update ODox for split common and i2c
* Add split config
* Impement Split code
* Add support for xscorpion OLED code
* Add OLED display config
* Fix OLED screen font
* Get OLED set up in vertical mode
* Remove old OLED code
* add per key support for crkbd
* Fix split changes
* RGB Tweeaks
* More OLED tweaks
* Fix rotation stuff
* Fix more OLED stuff
* Remove custom Debounce from Ergodox layout since it's no longer needed
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance
* Updating effect function api for future extensions
* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary
* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain
The other bépo layouts were a bit too complex/weird or without LED code
and hard to transition to for new users. This config is a good base for
bépo users.
* Fixed typo of 'confid.h' to 'config.h'
* Fixed broken links in docs
* Fixed a lot of dead links
* Removed all dead links that I could not find a replacement for
* Placed knops links back in
* Fixed plank keymaps so that they will compile for planck light
* Https doesn't work on knops.io
* tv44:budi now compiles
* s60_x:amnesia0287 now compiles
* Fixed allocation of key_combos so that narze keymap for planck can compile correctly
* Disabled rgb on ergodone and infinity
* Enabled tap dance so it compiles
* Added return statement so it compiles
* If compiling on light disable extra functionality
* Properly redefined variable so it compiles
* Remove remaining dead links
* Use correct functions for dip switch code
* Some planck cleanup
* Hopefully fix RGB Sleeping with RGB Matrix
* Add rgbmatrix extern
* Add numpad 5x6 layout
* RGB Tweaks
* Add RGB startup animation
* Minor RGB Fixes
* Turn off RBG on planck
* Enable separate storage of EEPROM
* Update Macro pad
* Add BJohnson Keymap and minor darshna tweaks
* Clean up rgb and other code for new numpad
* Remove clicky hachy thing
* Update my code to use built in MOD_MASK defines
* Fix up modifier calls
* Tweak to KC_MAKE
* Tweak to KC_MAKE
* Add Semi-colon to numpad
* Preprocess out rgb matrix stuff if not enabled
* Formatting of KC_MAKE
* Add stuff for matrix and light rgb coexistance
* Fix bad spelling
* Change where layer indication shows based on rgblight status
* Force set mods in KC_MAKE
* Optimize CRKBD
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4
* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions
* Update docs to use get_mods() instead of keyboard_report->mods
* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test
For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist
* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
* Remove QUANTUM_DIR code blocks from keyboard rules
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.
* remove QUANTUM_DIR code blocks from rules for default keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.
* remove QUANTUM_DIR code blocks from rules for user keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)
* remove QUANTUM_DIR code blocks from rules for community layouts
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.
* remove QUANTUM_DIR code blocks from rules for userspaces
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
* Use standard KC_ALGR, remove language-specific redefinitions
* Use ALGR instead of ALTGR in BÉPO and Canadian multilingual keymaps
* Remove BE_LALT, BE_LGUI aliases
* Bocaj Layout Revamp
* Pull in Upstream (#1)
* Various tweaks for some Input:Club build processes
* change KEYMAP to LAYOUT for all new keyboards made using this script
* Add support for rev3 of the Atom47 (#2672)
* Added support for rev3 of the Atom47
* Updated Atom47 readme's
* Fix redefine error on rev2 and add maartenwut's keymap
* Fix redefine error on LEdiodes keymap
* Add Nyquist keymap (#2692)
* nyquist
* danielhklein nyquist setup
* shift left controls
* remove readme
* cleanup before pr
* ready for pr
* Adds Phantom TKL support (#2696)
* Add an info.json to phantom keyboard
* Add layouts
- KEYMAP_WINKEYLESS
- KEYMAP_7BIT
- KEYMAP_ISO
- KEYMAP_ISO_WINKEYLESS
* Add key_counts
* Add 2 missing F-Row keys
* Add TKC1800 info.json
Created an info.json for the tkc1800.
* Clueboard 60 info.json
- adds
- LAYOUT_60_ansi
- LAYOUT_60_iso
- KEYMAP_AEK
- KEYMAP
- LAYOUT_60_ansi_split_bs_rshift
* Add the Speedo keyboard
* Fix KC60 info.json file (#2707)
* change KEYMAP to LAYOUT in all the KC60 files
* Redo the info.json file
* Small fixes to TKC1800
- adjust F-row to use 0.25 spacing
- split left shift
- add key_count
* Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708)
* change diverge 3 KC_KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for handwired arrow pad
* change M10A to LAYOUT for m10-a
* Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68
* change KC_KEYMAP to LAYOUT for nano
* Refactor to LAYOUT
* refactor to LAYOUT-ansi and LAYOUT_iso for s65
* LAYOUT conversions for lfkkeyboards
* missed a few renames
* mini1800 for lfkeyobards support of LAYOUT
* Improve state/chord handling and clean up namespace
Some values that can never, ever, change were held in local
variables, rather than in PROGMEM. Fixed.
Change "pressed" to a signed int so the test for < 0 makes
sense, and to avoid possible weird failure modes in the
case where a key release comes in when pressed is already
zero. (Shouldn't happen, sure, but computers are weird.)
A lot of things in process_steno had external linkage for no
particular reason. They've been marked static. Stuff still
builds.
Distinguish between currently-held keys and keys that have
been held, and expose these values through a nicely-named API
so other code could, say, check on the current set of steno
chording in order to make displays. Also in passing fix up the
"state" value having external linkage so it could clash with
other people's variable declarations.
The API also provides hooks for key processing and steno chord
events, so you can monitor those events without having to
run in matrix_scan_user and recheck the values directly. Also
document these.
There is no path through processing a key that doesn't
end with a return false, so the nested return foo() are
gone and we just return false.
* Pull information from config.h and rules.mk (#2711)
* Pull information from config.h and rules.mk
* Readd the kbd75 maintainer
* Remove obsolete info.json entries (#2712)
* Clean up some long-standing errors when populating the API (#2715)
* More Configurator Warning Fixes (#2716)
* mf68_ble did not have the correct .c and .h files
* Fix JC65 KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for s60_x
* Convert KEYMAP to LAYOUT for lets_split boards
* Convert KEYMAP to LAYOUT
* more fixes to keymap for iris
* convert KEYMAP to LAYOUT for levinson keyboard
* change losinggeneration's KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for nyquist
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for viterbi
* convert KEYMAP to LAYOUT
* convert KEYMAP and its subsidiries to the LAYOUT standard
* convert KEYMAP and its subsidiries to the new LAYOUT standard
* Normacos keymap for let's split keyboard (#2691)
* Cheers let's split keymap
* fixed typo on norman layer of cheers keymap for let's split
* fixed right handed mappings for home row
* cheers keymap for let's split redefinition
* updated Cheers keymap for let's split
* cheers keymap for let's split updated with some terminal macros
* renamed cheers let's split keymap to a more appropriate normacos
* updated normacos keymap doc / removed non functional keys
* reset let's split rules to default values
* added more spotlight search macros
* normalized keymap comments
* Moved numpad on lower layer
* hhkb jp personal keymap (#2698)
* Add JJ40 Cockpit personal keymap (#2713)
* Add JJ40 Cockpit keymap
* Fix lower layer symbols
* Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718)
* add readme to ktype keyboard
* add readme to m10a
* add readme to mini1800
* add readme to parent directory
* Revert "Pull in Upstream (#1)"
This reverts commit eeba0cec17.
* Updates to Bocaj Files
- Gave up on Tap Dance for ' -> '
+ Added another 'Secret'
+ Add ' -> ' to the Swap Hands key
+ Add Swap Hands to the ' -> ' key
+ Made Hand Swapping a momentary toggle
- Removed Auto Shift
+ Added Layer Toggle to KC_QUOTE for the _TOOLS layer
- Disabled Tap Dance
* Merge remote-tracking branch 'upstream/master'
* Updates to Bocaj
Added Game Layers, Removed Unused Macros
* Removed 'secrets.h'
* Updates to Bocaj
Remove 'secrets'.
Remove 'sendstring_workman.h' and set related layer back to qwerty due to macro compatibility issues
* Total revisioning of keymap and layout structure
* Missed readme.md file
* Bocaj - Permissive Hold setting enabled
* Switching from ErgoDox EZ centric configuration to the layout/user approach
* Bocaj - Create Userspace and Ergodox layout
* Update settings.json
* Pushing local updates
* Reverting .vscode/settings.json
* Adds pretty_osx and _win wrappers
* Utilize Windows and Mac Wrappers
* Update layouts/community/ergodox/bocaj/keymap.c
* Updates to Bocaj keymap.c
- Extended pretty_osx and pretty_win wrappers to allow modification of the bottom rows and thumb clusters.
- Fixed already wrapped layouts to align with the change
- Wrapped _NUMS and _CLICKY layers with the _osx wrapper because I main with a Mac
* Updates to Bocaj
Small documentation updates, added KC_MAKE from Drashna's layout, added KC_LOCK back to the diablo layer.
* Add LShift to _Adjust layer
* Minor changes to bocaj
Put wrappers in userspace and added RESET keycode to the Adjust layer
* Updates to Bocaj config & keymap; Fixed problem with process_leader.c
- Made lots of changes to the bocaj layout and userspace
- Pulled in latest upstream/master
- Attempted to compile with latest and found an unneccessary `break` in process_leader.c
* Bocaj - Updates to Layout and Userspace
* Adjust LEADER_TIMEOUT to 350
* Put KC_GRAVE on _ADJUST layer
* Eliminate _LOWER layer and associated definitions
* Adjusted layer indicating LEDs to match changes
* Fixed Diablo leader sequence
* Added build info leader sequence
* Got rid of obsoleted IGNORE_MOD_TAP_INTERRUPT/PERMISSIVE_HOLD/PREVENT_STUCK_MODIFIERS (may add STRICT_LAYER_RELEASE in the future)
* Remove type_traits
Not sure what in my VSCode config always brings this one in
* refactor stage 1
* Bocaj Refactor Phase II
* Made LED_2 brighter if both CTRL & GUI are being held
* Enabled unicode because I got it to work in Mac OS
* Finalized Build Info leader combination after testing in Mac OS
* Not sure why KC_D3_1 was set to ASDF if !TAP_DANCE_ENABLE. So I changed that back
* Experienced issues with `EXTRAFLAGS += -flto` using Docker in MacOS. Not sure what it does, but I don't seem to be missing anything
* Wrote obligatory readme.md files and mentioned Drashna too many times... I don't think I can actually take credit for much of anything here.
* Updates to Bocaj
Made LED changes, added LM_DFLT which is similar to the grave macro, enabled retro tapping, working on a unicode idea -- currently fails to build.
* Bocaj Refactor Phase 3 Part 2
- Continuation of implementing unicode switching based on default layer
- Slight adjustments to _DIABLO and base wrapper because LM_DFLT macro didn't function as I'd hoped
* Slight adjustment to KC_MAKE
* Make CRKBD keylogger output actually show tap keys
* check MT/LT for twinkling
* Add ortho 5x12 support for fractal keyboard
* Use newer interface for setting pins/ports
* Remove custom unicode methods
* Reomve unicode input info
* Odd rules issue
* Redefine REST note to be more pleasing
* Properly disable PM LEDs with GPIO commands
* Update gitlab CI yaml file
* Remove extra mod tap check
* Remove initial state on ergodox glow
* Rev6 Cleanup
* Fix KC_MAKE macro
* Update GitLab CI yaml file
* More GitLab CI changes
* One final GitLab CI change
* Remove unneeded unicode support
* Optimize KC_MAKE
* Fix reversed bool check in layer_state_set
* Add Quefrency 65 for a friend
* Add Ergodox EZ Glow keymap
* Add RGB Matrix Code
* Further changes to rgb matrix ErgoDox EZ
* Update bjohnson keymaps
* Fix CRKBD display
* Overhaul to corne keyboard
* Narrow scope for keylogger
* Minor layout tweaks to Corne Keyboard
* additional CRKBD tweaks
* Minor tweaks to CRKBD
* Add all characters for keylogger
* Ergodox EZ Glow overhaul
* Fix Ergodox EZ Glow layer colors
* Increase Tapping Term for Corne Keyboard
* Fix unicode-ish
* Revert some changes
* Add layer specific lighting effects
* Some minor tweaks to ergodox glow config
* revert changes to ergodox files
* Update Glow readme
* Add more tapping term defines
* Fix changes
* Fix ergodox keymap
* Hopefully fix sleeping
* Disable layer indications if rgb matrix is disabled
* Add support for sleeping and rgb layer change toggle to ergodox ez glow
* Make RGB Layer Indication Great Again
* Make Unicode Great Again
* Remove placeholder define
Co-Authored-By: drashna <drashna@live.com>
* Remove placeholder define
Co-Authored-By: drashna <drashna@live.com>
* Remove old EEPROM Reset keycode
