varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/darkproject/kd83a_bfg_edition
History
Nick Brassel 45dc2499dc
Remove all via-enabled keymaps, including via. (#24322)
2024-08-26 07:51:22 +10:00
..
keymaps/default Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
config.h Migrate LOCKING_*_ENABLE to Data-Driven: D, Part 1 (#23749) 2024-05-20 20:31:42 +01:00
halconf.h [Keyboard] darkproject/kd83a_bfg_edition (#18416) 2023-11-22 14:13:16 -08:00
kd83a_bfg_edition.c Update GPIO API usage in keyboard code (#23361) 2024-05-03 15:21:29 +10:00
kd83a_bfg_edition.h [Keyboard] darkproject/kd83a_bfg_edition (#18416) 2023-11-22 14:13:16 -08:00
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: D, Part 1 (#23749) 2024-05-20 20:31:42 +01:00
mcuconf.h [Keyboard] darkproject/kd83a_bfg_edition (#18416) 2023-11-22 14:13:16 -08:00
readme.md [Keyboard] darkproject/kd83a_bfg_edition (#18416) 2023-11-22 14:13:16 -08:00

readme.md

kd83a_bfg_edition

KD83A_BFG_EDITION KD83A_BFG_EDITION

An 83 keys keyboard, Equipped with the WestBerry Q95 microcontroller.

  • Keyboard Maintainer: GSKY
  • Hardware Supported: KD83A_BFG_Edition
  • Hardware Availability: GSKY GitHub

Make example for this keyboard (after setting up your build environment):

make darkproject/kd83a_bfg_edition:default

Flashing example for this keyboard:

make darkproject/kd83a_bfg_edition:default:flash

To reset the board into bootloader mode, do one of the following:

  • Hold the Reset switch mounted on the surface of the PCB back side after the USB cable is connected
  • Hold the Escape key while connecting the USB cable (also erases persistent settings)
  • Fn+ESC will reset the board to bootloader mode

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.