History

Nick Brassel 45dc2499dc Remove all via-enabled keymaps, including `via`. (#24322 )		2024-08-26 07:51:22 +10:00
..
keymaps/default	Remove all via-enabled keymaps, including `via`. (#24322 )	2024-08-26 07:51:22 +10:00
3dp660_oled.c	Added 3dp660 oled keyboard (#20591 )	2023-10-04 21:45:27 -07:00
keyboard.json	Migrate build target markers to keyboard.json (#23293 )	2024-03-30 11:31:50 +00:00
readme.md	Added 3dp660 oled keyboard (#20591 )	2023-10-04 21:45:27 -07:00

handwired/3dp660_oled

A handwired FC660 layout with OLED display support.

Keyboard Maintainer: xia0
Hardware Supported: ATmega32U4 e.g. Arduino Pro Micro or Teensy 2.0
- Note: If using a Pro Micro, pins B0 and D5 are required. Click for details.
Hardware Availability: Printables

Make example for this keyboard (after setting up your build environment):

make handwired/3dp660_oled:default

Flashing example for this keyboard:

make handwired/3dp660_oled:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the MCU or short RST to GND.
Keycode in layout: Press the key mapped to QK_BOOT if it is available