varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/handwired/splittest/promicro
History
Joel Challis f0807ea64f
Migrate SPLIT_HAND_PIN to json (#23924)
2024-07-13 13:29:16 +01:00
..
config.h Migrate SPLIT_HAND_PIN to json (#23924) 2024-07-13 13:29:16 +01:00
keyboard.json Migrate SPLIT_HAND_PIN to json (#23924) 2024-07-13 13:29:16 +01:00
readme.md [Keyboard] Refactor handwired/splittest to support multiple boards (#6373) 2019-07-20 13:35:30 -07:00

readme.md

Pro Micro splittest

To trigger keypress, short together pins B3 and B6 (marked on the PCB as 14 and 10).

Wiring

  • Add switches to both Pro Micros across B3 and B6 pins
  • Add pull-up resistor to left side between VCC and F6
  • Add pull-down resistors to right side between GND and F6
  • Connect the following pins on both sides together: D0, D1, GND, VCC
  • Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
  • Wire Di of RGB strip for each half to D3