1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/keyboards/duck/jetfire/config.h
James Young 6f36eb469d
Remove unused IS_COMMAND() instances and Magic Key definitions (#14610)
* Remove unused IS_COMMAND() instances from keyboard-level config.h, 0-9

* Remove unused IS_COMMAND() instances from keyboard-level config.h, A-B

* Remove unused IS_COMMAND() instances from keyboard-level config.h, C-D

* Remove unused IS_COMMAND() instances from keyboard-level config.h, E-G

* Remove unused IS_COMMAND() instances from keyboard-level config.h, handwired

* Remove unused IS_COMMAND() instances from keyboard-level config.h, H-M

* Remove unused IS_COMMAND() instances from keyboard-level config.h, N-R

* Remove unused IS_COMMAND() instances from keyboard-level config.h, S-Z

* Remove unused Magic Key definitions from keyboard-level config.h, 0-9

* Remove unused Magic Key definitions from keyboard-level config.h, A

* Remove unused Magic Key definitions from keyboard-level config.h, B

* Remove unused Magic Key definitions from keyboard-level config.h, C

* Remove unused Magic Key definitions from keyboard-level config.h, D-E

* Remove unused Magic Key definitions from keyboard-level config.h, F-H

* Remove unused Magic Key definitions from keyboard-level config.h, handwired

* Remove unused Magic Key definitions from keyboard-level config.h, I-K

* Remove unused Magic Key definitions from keyboard-level config.h, L-M

* Remove unused Magic Key definitions from keyboard-level config.h, N-R

* Remove unused Magic Key definitions from keyboard-level config.h, S-V

* Remove unused Magic Key definitions from keyboard-level config.h, W-Z

* Merge remote-tracking branch 'upstream/master' into clean/command_and_magic

* Remove remaining unused IS_COMMAND() instances from keyboard-level config.h
2021-09-26 02:57:20 -07:00

97 lines
2.7 KiB
C

/*
Copyright 2018 MechMerlin
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x444B // Duck ("DK")
#define PRODUCT_ID 0x4A46 // Jetfire ("JF")
#define DEVICE_VER 0x0001
#define MANUFACTURER Duck
#define PRODUCT Jetfire
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 20
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_LEVELS 1
#define RGB_DI_PIN D6
// #ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 23
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Set to top left most key */
#define BOOTMAGIC_LITE_ROW 5
#define BOOTMAGIC_LITE_COLUMN 10
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION