varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/dp3000
History
Joel Challis bfcf3c139d
Remove always enabled effects from lighting animation list (#22992) 
* Remove 'solid_color' from animation list

* Remove 'solid'/'none' from animation list
2024-01-31 10:03:24 +00:00
..
keymaps
rev1 Remove always enabled effects from lighting animation list (#22992) 2024-01-31 10:03:24 +00:00
rev2 Migrate RGB Matrix config to info.json - D (#22811) 2024-01-07 13:36:14 +00:00
dp3000.c Add OLED logo DP3000 macropad (#21936) 2023-09-19 17:08:58 -06:00
info.json add dp3000 rev2 featuring rgblight (#22084) 2023-09-24 11:04:39 -07:00
post_config.h Add OLED logo DP3000 macropad (#21936) 2023-09-19 17:08:58 -06:00
readme.md add dp3000 rev2 featuring rgblight (#22084) 2023-09-24 11:04:39 -07:00
rules.mk add dp3000 rev2 featuring rgblight (#22084) 2023-09-24 11:04:39 -07:00

readme.md

DP3000

dp3000 macropad

dp3000 is a simple yet elegant macropad, 2x4 (8 keys), dual encoder, embedded with an Atmel 32u4 chip, powered by QMK.

  • Rev. 1 Support RGB matrix
  • Rev. 2 Support RGB light (underglow)
  • Keyboard Maintainer: Deddia Permana
  • Hardware Supported: DP3000 PCB rev1 and rev2, ATmega32u4
  • Hardware Availability: tokopedia.com/gundamtricks

Make example for this keyboard (after setting up your build environment):

make dp3000/rev1:default
make dp3000/rev2:default

Flashing example for this keyboard:

make dp3000/rev1:default:flash
make dp3000/rev2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (left rotary encoder push switch) and plug in the keyboard
  • Physical reset button: Briefly press reset button twice, located in front of the first rotary encoder (left rotary encoder)
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available