varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/ms_sculpt
History
James Young 26b17a71e0
MS Sculpt Touch-Up (#17871) 
* info.json: fix JSON syntax error

* info.json: convert tabs to spaces

* info.json: add QMK Configurator layout data

* readme.md: switch Bootloader and Docs sections
2022-08-01 17:09:40 +01:00
..
keymaps/default Added MS Sculpt ISO-layout conversion with STM32F401 (#17049) 2022-07-02 22:16:38 +10:00
config.h Added MS Sculpt ISO-layout conversion with STM32F401 (#17049) 2022-07-02 22:16:38 +10:00
info.json MS Sculpt Touch-Up (#17871) 2022-08-01 17:09:40 +01:00
ms_sculpt.h Fixup builds for TzCI (#17538) 2022-07-03 00:23:08 +10:00
readme.md MS Sculpt Touch-Up (#17871) 2022-08-01 17:09:40 +01:00
rules.mk Added MS Sculpt ISO-layout conversion with STM32F401 (#17049) 2022-07-02 22:16:38 +10:00

readme.md

ms_sculpt

ms_sculpt_with_cold_dry_joints

MS Sculpt Keyboard ISO-layout wired to STM32F401 / blackpill

  • Keyboard Maintainer: Jean Bernard
  • Hardware Supported: MS Sculpt Keyboard ISO-layout, STM32F401
  • Hardware Availability: Ebay

Make example for this keyboard (after setting up your build environment):

make ms_sculpt:default

Flashing example for this keyboard:

make ms_sculpt:default:flash

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.