varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/cherrybstudio/cb1800
History
DA 851cb7e406
[Keyboard] and CB87v2 and CB87RGB and fixed CB1800 and CB87 (#15824) 
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2022-01-13 20:37:40 -08:00
..
keymaps [Keyboard] add cherryb studio cb1800 keyboard (#13639) 2021-07-29 08:48:39 -07:00
cb1800.c [Keyboard] add cherryb studio cb1800 keyboard (#13639) 2021-07-29 08:48:39 -07:00
cb1800.h [Keyboard] add cherryb studio cb1800 keyboard (#13639) 2021-07-29 08:48:39 -07:00
config.h [Keyboard] and CB87v2 and CB87RGB and fixed CB1800 and CB87 (#15824) 2022-01-13 20:37:40 -08:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md [Keyboard] add cherryb studio cb1800 keyboard (#13639) 2021-07-29 08:48:39 -07:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

CherryB Studio CB1800

cb1800

A G80-1800 inspired PCB for CB1800 Zakabato and any suitable 1800 layout keyboards.

  • Keyboard Maintainer: duongaanh
  • Hardware Supported: cb1800, atmega32u4
  • Hardware Availability: CherryB Studio

Make example for this keyboard (after setting up your build environment):

make cherrybstudio/cb1800:default

Flashing example for this keyboard:

make cherrybstudio/cb1800:default:flash

Accessing Bootloader Mode

To access Bootloader Mode, do one of the following:

  • Tap the Reset switch mounted on the top side of the PCB to the left of the spacebar
  • Hold the top left key of the keyboard while connecting the USB cable

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.