forked from forks/qmk_firmware
3c58f98929
* PMW33XX drivers overhaul This combines the PMW3389 and PM3360 drivers as they only differ in the firmware blobs and CPI get and set functions. The following changes have been made: * PMW3389 now gets the same multi-sensor feature that is already available on the PMW3360. * Introduced a shared pmw33xx_report_t struct is now directly readable via SPI transactions instead of individual byte-sized reads, saving multiple copies and bitshift operations. * pmw33(89/60)_get_report functions had unreachable branches in their motion detection logic these have been simplied as much as possible. * The fast firmware upload option has been removed as this becomes obsolete by the newly introduced polled waiting functions for ChibiOS polled waiting * PMW33(60/89)_SPI_LSBFIRST and PMW33(60/89)_SPI_MODE config options have been removed as they don't need to be configurable. * All PMW3389 and PMW3360 defines have been unified to a PMW33XX prefix to reduce code duplication and make the defines interchangeable * Adjust keyboards to PMW33XX naming scheme
107 lines
3.6 KiB
C
107 lines
3.6 KiB
C
/**
|
|
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#pragma once
|
|
|
|
#undef MATRIX_COL_PINS
|
|
#define MATRIX_COL_PINS \
|
|
{ B0, B1, B12, B3, B4, B5 }
|
|
#undef MATRIX_COL_PINS_RIGHT
|
|
#define MATRIX_COL_PINS_RIGHT \
|
|
{ B0, B1, B12, B3, B4, B5 }
|
|
|
|
#undef MATRIX_ROW_PINS
|
|
#define MATRIX_ROW_PINS \
|
|
{ B15, A2, B8, A8, B9 }
|
|
#undef MATRIX_ROW_PINS_RIGHT
|
|
#define MATRIX_ROW_PINS_RIGHT \
|
|
{ B15, A2, B8, A8, B9 }
|
|
|
|
#define UNUSED_PINS { B6, C14, C15 }
|
|
|
|
#define DIODE_DIRECTION ROW2COL
|
|
#define SPLIT_HAND_PIN A3
|
|
#undef MASTER_RIGHT
|
|
// #define USB_VBUS_PIN B10
|
|
|
|
#undef RGB_DI_PIN
|
|
#define RGB_DI_PIN A1
|
|
#define WS2812_EXTERNAL_PULLUP
|
|
#define WS2812_PWM_DRIVER PWMD2
|
|
#define WS2812_PWM_CHANNEL 2
|
|
#define WS2812_PWM_PAL_MODE 1
|
|
#define WS2812_EXTERNAL_PULLUP
|
|
#define WS2812_DMA_STREAM STM32_DMA1_STREAM1
|
|
#define WS2812_DMA_CHANNEL 3
|
|
#define WS2812_PWM_TARGET_PERIOD 800000
|
|
|
|
#define DEBUG_LED_PIN C13
|
|
|
|
#define AUDIO_PIN B7
|
|
#define AUDIO_PWM_DRIVER PWMD4
|
|
#define AUDIO_PWM_CHANNEL 2
|
|
#define AUDIO_PWM_PAL_MODE 2
|
|
#define AUDIO_STATE_TIMER GPTD3
|
|
#define AUDIO_INIT_DELAY
|
|
|
|
#undef SOFT_SERIAL_PIN
|
|
// #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
|
|
#define SERIAL_USART_TX_PIN A9
|
|
// #define SERIAL_USART_RX_PIN A3
|
|
// #define SERIAL_USART_DRIVER SD2
|
|
// #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
|
|
// #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
|
|
// #define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100
|
|
// // #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master
|
|
// // To use the highest possible baudrate (3.75Mbit/s) uncomment the following
|
|
// // line, this can result in dropped communications so lower the speed if there
|
|
// // are many timeouts.
|
|
// // #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4)
|
|
#define SERIAL_USART_SPEED 921600
|
|
|
|
#define CRC8_USE_TABLE
|
|
#define CRC8_OPTIMIZE_SPEED
|
|
|
|
/* spi config for eeprom and pmw3360 sensor */
|
|
#define SPI_DRIVER SPID1
|
|
#define SPI_SCK_PIN A5
|
|
#define SPI_SCK_PAL_MODE 5
|
|
#define SPI_MOSI_PIN A7
|
|
#define SPI_MOSI_PAL_MODE 5
|
|
#define SPI_MISO_PIN A6
|
|
#define SPI_MISO_PAL_MODE 5
|
|
|
|
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
|
|
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
|
|
|
|
#undef PMW33XX_CS_PIN
|
|
#define PMW33XX_CS_PIN A15 // b14
|
|
#define PMW33XX_LIFTOFF_DISTANCE 0b1111
|
|
#undef ROTATIONAL_TRANSFORM_ANGLE
|
|
#define ROTATIONAL_TRANSFORM_ANGLE -65
|
|
|
|
#define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200
|
|
#define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400
|
|
#define CHARYBDIS_MINIMUM_SNIPING_DPI 200
|
|
#define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100
|
|
|
|
/* RGB Matrix. */
|
|
|
|
#undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
|
|
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
|
|
|
|
#define CHARYBDIS_CONFIG_SYNC
|