History

Jun Wako d23d95381a m0110: Fix Makefile		2015-03-19 06:56:56 +09:00
..
config.h	Change keymap and enable bootmagic of M0110	2013-09-21 21:07:55 +09:00
keymap_common.c	Change key_t to keypos_t	2014-11-24 15:14:52 +09:00
keymap_common.h	m0110: Add support for international keyboard	2015-03-19 06:25:48 +09:00
keymap_default.c	m0110: Add support for international keyboard	2015-03-19 06:25:48 +09:00
keymap_for_editor.c	Change keymaps of M0110	2014-06-22 14:15:38 +09:00
keymap_hasu.c	Change keymaps of M0110	2014-06-22 14:15:38 +09:00
keymap_intl.c	m0110: Fix README.md and keymap_intl.c	2015-03-19 06:39:13 +09:00
keymap_plain.c	m0110: Add support for international keyboard	2015-03-19 06:25:48 +09:00
keymap_spacefn.c	Change keymaps of M0110	2014-06-22 14:15:38 +09:00
led.c	m0110: Add support for international keyboard	2015-03-19 06:25:48 +09:00
Makefile	m0110: Fix Makefile	2015-03-19 06:56:56 +09:00
Makefile.pjrc	Change Makefile and port setting	2013-08-04 16:17:53 +09:00
Makefile.teensy	m0110: Add support for international keyboard	2015-03-19 06:25:48 +09:00
matrix.c	Add new build options on m0110_usb	2013-04-12 22:49:16 +09:00
README.md	m0110: Fix README.md and keymap_intl.c	2015-03-19 06:39:13 +09:00

README.md

M0110/M0110A to USB keyboard converter

This firmware converts the protocol of Apple Macintosh keyboard M0110, M0110A and M0120 into USB. Target of this project is USB AVR controller like ATmega32U2 and ATmega32U4. Using this converter you can revive these retro keyboards with modern computer.

Read README of top directory too.

Pictures of M0110 + M0120 and M0110A.

M0110A support was contributed by skagon@github.
M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys.

Update

2013/08: Change port for signals PF to PD
2013/09: Change port again, it uses inversely PD0 for data and PD1 for clock line now.
2014/06: Change keymaps
2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c)

Building Hardware

You need TMK converter or AVR dev board like PJRC Teensy. Port of the MCU PD1 is assigned to CLOCK line and PD0 to DATA by default, you can change pin configuration with editing config.h.

4P4C phone handset cable

Note that original cable used with Mac is straight while phone handset cable is crossover.

http://en.wikipedia.org/wiki/Modular_connector#4P4C

Close-up picture of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge.

Socket Pinout

http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml

Pull-up Resistor

You may need pull-up resistors on signal lines(CLOCK, DATA) in particular when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors.

Building Firmware

To compile firmware you need AVR GCC. You can edit Makefile and config.h to change compile options and pin configuration. Also KEYMAP option can be used to select keymap.

$ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
$ cd m0110_usb
$ make -f Makefile clean
$ make -f Makefile [KEYMAP={default|plain|intl|spacefn|hasu}]

Use Makefile.teensy instead for Teensy.

Keymap

To create your own keymap copy existent keymap file to keymap_name.c and edit it. You can build it like this.

$ make -f Makefile clean
$ make -f Makefile KEYMAP=name

Debug

You can use PJRC HID listen to see debug output. The converter has some functions for debug, press <Magic>+H simultaneously to get help.

Magic combo: Shift+Option+⌘ or Shift+Option+Ctrl(Shift+Alt+Gui or Shift+Alt+Control)