varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/studiokestra/galatea
History
Ryan e933e0411f
Move matrix config to info.json, part 5 (#20003) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-03-11 05:41:58 +11:00
..
keymaps Remove legacy keycodes, part 6 (#18740) 2022-10-16 14:14:40 +01:00
rev1 Move matrix config to info.json, part 5 (#20003) 2023-03-11 05:41:58 +11:00
rev2 Move matrix config to info.json, part 5 (#20003) 2023-03-11 05:41:58 +11:00
config.h Move matrix config to info.json, part 5 (#20003) 2023-03-11 05:41:58 +11:00
galatea.c
galatea.h
readme.md Revert RESET-> QK_BOOT in Read Me files where applicable (#19262) 2022-12-09 03:12:49 +11:00
rules.mk

readme.md

Galatea

TKL H87/88c compatible PCB with support for the most common layouts.

  • Keyboard Maintainer: Studio Kestra
  • Hardware Supported: studiokestra.ca/galatea
  • Hardware Availability: In-Stock Sale (Dec 2021)
  • Rev1 firmware is used for Galatea PCBs with no RGB underglow.
  • Rev2 firmware is used for Galatea PCBs with RGB underglow.

Bootload Sequence

There are 3 ways to put the board in bootloader mode:

  • Hold the top-left key (typically Esc) while plugging in the USB cable, OR
  • While the PCB is plugged into the PC, press the physical RESET button on the back of the board, OR
  • With the default layout, toggle Layer 1 and press the R key.

Compiling Firmware

Make example for this keyboard (after setting up your build environment):

make studiokestra/galatea/rev1:default

If no revision is specified, it will build rev1 firmware by default.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.