1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/keyboards/yushakobo/quick7/config.h
James Young c66df16644
2020 November 28 Breaking Changes Update ()
* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 ()                                           

* Add support for soft serial to ATmega32U2 ()                                               

* Change MIDI velocity implementation to allow direct control of velocity value ()            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. ()                                                  

* Joystick 16-bit support ()                                                                 

* Per-encoder resolutions ()                                                                 

* Share button state from mousekey to pointing_device ()                                     

* Add hotfix for chibios keyboards not wake ()                                               

* Add advanced/efficient RGB Matrix Indicators ()                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K ()                                                       

* Add milc as a dependency and remove the installed milc ()                                  

* ChibiOS upgrade: early init conversions ()                                                 

* ChibiOS upgrade: configuration file migrator ()                                             

* Haptic and solenoid cleanup ()                                                              

* XD75 cleanup ()                                                                            

* OLED display update interval support ()                                                    

* Add definition based on currently-selected serial driver. ()                               

* New feature: Retro Tapping per key ()                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. ()             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. ()

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation ()                                                    

* Minor change to behavior allowing display updates to continue between task ticks ()        

* Some GPIO manipulations in matrix.c change to atomic. ()                                   

* qmk cformat ()                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 ()                                          

* Maartenwut/Maarten namechange to evyd13/Evy ()                                             

* [quantum] combine repeated lines of code ()                                                

* Add step sequencer feature ()                                                               

* aeboards/ext65 refactor ()                                                                 

* Refactor xelus/dawn60 for Rev2 later ()                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk ()                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` ()                                    

* update chibios os usb for the otg driver ()                                                 

* Remove HD44780 References, Part 4 ()                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) ()                                                

* Fix cursor position bug in oled_write_raw functions ()                                     

* Fixup version.h writing when using SKIP_VERSION=yes ()                                     

* Allow for certain code in the codebase assuming length of string. ()                       

* Add AT90USB support for serial.c ()                                                        

* Auto shift: support repeats and early registration ()                                       

* Rename ledmatrix.h to match .c file ()                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER ()                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER ()                                        

* Merge point for 2020 Nov 28 Breaking Change
2020-11-28 12:02:18 -08:00

225 lines
7 KiB
C

/*
Copyright 2020 yushakobo
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x3265
#define PRODUCT_ID 0x0002
#define DEVICE_VER 0x0001
#define MANUFACTURER yushakobo
#define PRODUCT quick7
#define DESCRIPTION A simple macropad with rotary encoders.
/* key matrix size */
#define MATRIX_ROWS 3
#define MATRIX_COLS 3
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define DIRECT_PINS { \
{ D2, D4, F4 }, \
{ D7, B1, B3 }, \
{ E6, B4, B2 }, \
}
#define ENCODERS_PAD_A { D1, F5 }
#define ENCODERS_PAD_B { D0, F6 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
#ifdef RGBLIGHT_ENABLE
# define RGB_DI_PIN D3
# define RGBLED_NUM 13
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
///*== all animations enable ==*/
//# define RGBLIGHT_ANIMATIONS
///*== or choose animations ==*/
//# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
//# define RGBLIGHT_EFFECT_SNAKE
//# define RGBLIGHT_EFFECT_KNIGHT
# define RGBLIGHT_EFFECT_CHRISTMAS
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
// # define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// # define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
/* defined by default; to change, uncomment and set to the combination you want */
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP H
//#define MAGIC_KEY_HELP_ALT SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER0_ALT GRAVE
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER B
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#ifndef LTO_ENABLE
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
#endif
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0