1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/ps2_usb/README
tmk 6d45e05ede Added PS/2 multimeda key support.
HID Consumer page and System control are also supported now.
merged mediakey branch: d53a356cd2011b461843a5c7c1527a61692893c1
2011-05-31 21:25:16 +09:00

167 lines
6.6 KiB
Plaintext

PS/2 to USB keyboard converter
==============================
This firmware converts PS/2 keyboard protocol to USB.
Demostration build
------------------
In this demo build, you can try several layouts,
mouse keys and USB NKRO.
Special keys:
Magic+0: Qwerty with mouse keys(default)
Magic+1: Qwerty
Magic+2: Colemak
Magic+3: Dvorak
Magic+4: Workman
Magic+N: toggles NKRO/6KRO(6KRO by default)
Magic+Esc: sends Power Event
where Magic=(LShift+RShift) or (LControl+RShift)
Keybinds:
Fn0+(hjkl): Mouse key move(vi cursor)
Fn0+(yuio): Mouse wheel(left,down,up,right)
Fn0+space: Mouse button1
Fn0+(mnb): Mouse buttons(1,2,3)
Fn0+(zxc): Media control(Volup, Voldown, Mute)
Fn1+(hjkl): Cursor move(vi cursor)
Fn1+(nm,.): Cursor move(Home,PageDown,PageUp,End)
Fn2+(esdf): Mouse key move(invert T cursor)
Fn2+(qwrt): Mouse wheel(left,down,up,right)
Fn2+space: Mouse button1
Fn2+(,./): Media control(Volup, Voldown, Mute)
where Fn0=;, Fn1=/, Fn2=a
Features
--------
Mouse keys
You can emulates mouse move and button click using keyboard.
System/Media control
You can sends Power event, Volume down/up and Mute.
USB NKRO(actually 120KRO+8Modifiers)
You can tolggles NKRO/6KRO.(Not tested on Mac.)
Keymap customization
You can customize keymaps easily by editing source code.
Build for Teensy
----------------
0. Connect PS/2 keyboard to Teensy by 4 lines(Vcc, GND, Data, Clock).
1. Define following macros for PS/2 connection in config_pjrc.h:
PS2_DATA_PORT
PS2_DATA_PIN
PS2_DATA_DDR
PS2_DATA_BIT
PS2_CLOCK_PORT
PS2_CLOCK_PIN
PS2_CLOCK_DDR
PS2_CLOCK_BIT
2. Edit Makefile for build options and MCU setting.
2. make
3. program Teensy.
http://www.pjrc.com/teensy/loader.html
Build for V-USB
---------------
0. Build V-USB controller board and connect PS/2 keyboard.
1. Define macros in config_vusb.h if needed.
2. Edit Makefile.vusb for build options and MCU setting.
3. make -f Makefile.vusb
4. program your V-USB controller.
V-USB Circuit
-------------
+---+ +---------------+
USB GND | | ATmega168 |
=== C3 | |
5V <-------+--------+---|Vcc,AVCC | PS/2
R1 | | ====
D- <----+--+-----R2-----|INT1 RXD|------->DATA
D+ <----|---+----R3-----|INT0 XCK|------->CLOCK
Z1 Z2 | | ->5V
GND<----+---+--+--+-----|GND | ->GND
| | | |
| C2-+--|XTAL1 |
| X1 | |
+--C3-+--|XTAL2 |
+---------------+
R1: 1.5K Ohm
R2,R3: 68 Ohm
Z1,Z2: Zenner 3.6V
C1,C2: 22pF
C3: 0.1uF
X1: Crystal 20MHz(16MHz/12MHz)
Keymap
------
You can change a keymap by editing code of keymap.c like following.
How to define the keymap is probably obvious. You can find key
symbols in usb_keycodes.h.
If you want to define more than one keymap, see hhkb/keymap.c and
macway/keymap.c as examples. To define keymap(layer) switching may
needs a bit of your effort at this time.
/* Default Layer: plain keymap
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
* `---' `---------------' `---------------' `---------------' `-----------' `-----------'
* ,-----------------------------------------------------------. ,-----------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
* |-----------------------------------------------------------| |-----------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
* |-----------------------------------------------------------| `-----------' |-----------| +|
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
* |-----------------------------------------------------------| ,---. |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
* |-----------------------------------------------------------| ,-----------. |-----------|Ent|
* |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
* `-----------------------------------------------------------' `-----------' `---------------'
*/
KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14,
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
),
Multimedia keys
---------------
Following lists PS/2 special keys supported by Windows.
http://msdn.microsoft.com/en-us/windows/hardware/gg463372.aspx
Key PS/2(Set2) HID
---------------------------------------------------
System Power E0 37 01 0081
System Sleep E0 3F 01 0082
System Wake E0 5E 01 0083
System Mute E0 23 0C 00E2
Volume Up E0 32 0C 00E9
Volume Down E0 21 0C 00EA
Scan Next Track E0 4D 0C 00B5
Scan Previous Track E0 15 0C 00B6
Stop E0 3B 0C 00B7
Play/Pause E0 34 0C 00CD
Media Select E0 50 0C 0183
Mail E0 48 0C 018A
Calculator E0 2B 0C 0192
My Computer E0 40 0C 0194
WWW Search E0 10 0C 0221
WWW Home E0 3A 0C 0223
WWW Back E0 38 0C 0224
WWW Forward E0 30 0C 0225
WWW Stop E0 28 0C 0226
WWW Refresh E0 20 0C 0227
WWW Favorites E0 18 0C 022A
EOF