varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/geonworks/frogmini
History
James Young 73f9fb91a3
Migrate LOCKING_*_ENABLE to Data-Driven: G (#23758) 
Affects:

  - `gboards/ergotaco`
  - `gboards/georgi`
  - `gboards/gergo`
  - `geekboards/tester`
  - `geonworks/frogmini/fmh`
  - `geonworks/frogmini/fms`
  - `gh60/revc`
  - `gh60/satan`
  - `ghs/rar`
  - `gkeyboard/gkb_m16`
  - `gkeyboard/gpad8_2r`
  - `gl516/a52gl`
  - `gl516/j73gl`
  - `gl516/n51gl`
  - `gmmk/gmmk2/p65`
  - `gmmk/gmmk2/p96`
  - `gmmk/numpad`
  - `gmmk/pro`
  - `gon/nerd60`
  - `gon/nerdtkl`
  - `gray_studio/aero75`
  - `gray_studio/cod67`
  - `gray_studio/space65`
  - `gray_studio/space65r3`
  - `gray_studio/think65v3`
  - `grid600/press`
2024-05-21 13:04:53 +01:00
..
fmh Migrate LOCKING_*_ENABLE to Data-Driven: G (#23758) 2024-05-21 13:04:53 +01:00
fms Migrate LOCKING_*_ENABLE to Data-Driven: G (#23758) 2024-05-21 13:04:53 +01:00
readme.md

readme.md

GeonWorks Frog Mini PCB firmware

FM_image

The Frog Mini is a 60% keyboard designed by GeonWorks, with PCB by Gondolindrim.

Two PCB variants are offered: FM-S (solderable) and FM-H (hotswap with Kailh sockets).

How to flash

Enter bootloader

Release Alpha:

The DFU state in the bootloader can be accessed in 2 ways:

  • Bootmagic reset: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the back of the PCB
  • Keycode in layout: press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Release Beta:

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the back of the PCB, for at least five seconds
  • Keycode in layout: press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Compile firmware

FM-S (solderable)

After accessing the DFU state in your PCB, build the default layout using:

make geonworks/frogmini/fms:default

FM-H (hotswap)

After accessing the DFU state in your PCB, build the default layout using:

make geonworks/frogmini/fmh:default

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.