varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/tmk_core/common/command.c
Takeshi ISHII 6169b47e82
Add target 'check-md5' to build_keyboard.mk (#11338) 
* Add target 'build-for-compare' to `build_keyboard.mk`

The `build-for-compare` target provides an easy way to check the md5 checksum of the generated binary.

You can easily see if there is any change in the generated binaries between the two versions, as in the example below.

```
$ git checkout 0.11.0
M	build_keyboard.mk
M	tmk_core/rules.mk
Note: checking out '0.11.0'.
HEAD is now at c66df1664 2020 November 28 Breaking Changes Update (#11053)

$ make helix:all:build-for-compare | grep ^MD5
MD5 (.build/helix_rev2_default.hex) = 5c3606562c944bb4d18832e601b45d4a
MD5 (.build/helix_rev2_edvorakjp.hex) = 9e43d13d389d518ba7e99cd7337e28d6
MD5 (.build/helix_rev2_five_rows.hex) = 8bcb61c2fd5d237c2997f2fa007d4934
MD5 (.build/helix_rev2_five_rows_jis.hex) = b97cd818d52f73ca2d4e78c86d90a791
MD5 (.build/helix_rev2_froggy.hex) = c492172364188f4e2918b10bf0f3a0a6
MD5 (.build/helix_rev2_froggy_106.hex) = b0861fd735a8f81881a8c02730641a2b
MD5 (.build/helix_rev2_led_test.hex) = 5c97d982a5da5cfb3dacb28a8934b81d
MD5 (.build/helix_rev2_xulkal.hex) = 01f603dc46bcf9094d7e106831d8f5b1
MD5 (.build/helix_rev2_yshrsmz.hex) = 5a008bca2d0c5790a151c02834c529ba

$ git checkout 0.11.1
M	build_keyboard.mk
M	tmk_core/rules.mk
Previous HEAD position was c66df1664 2020 November 28 Breaking Changes Update (#11053)
HEAD is now at cc08e3082 nix-shell: add milc dependency (#11086)

$ make helix:all:build-for-compare | grep ^MD5
MD5 (.build/helix_rev2_default.hex) = 5c3606562c944bb4d18832e601b45d4a
MD5 (.build/helix_rev2_edvorakjp.hex) = 9e43d13d389d518ba7e99cd7337e28d6
MD5 (.build/helix_rev2_five_rows.hex) = 8bcb61c2fd5d237c2997f2fa007d4934
MD5 (.build/helix_rev2_five_rows_jis.hex) = b97cd818d52f73ca2d4e78c86d90a791
MD5 (.build/helix_rev2_froggy.hex) = c492172364188f4e2918b10bf0f3a0a6
MD5 (.build/helix_rev2_froggy_106.hex) = b0861fd735a8f81881a8c02730641a2b
MD5 (.build/helix_rev2_led_test.hex) = 5c97d982a5da5cfb3dacb28a8934b81d
MD5 (.build/helix_rev2_xulkal.hex) = d848383adfd7463b138c6da179cf1436
MD5 (.build/helix_rev2_yshrsmz.hex) = 5a008bca2d0c5790a151c02834c529ba
```

* make builds reproducable by default

* update build_keyboard.mk: remove 'build-for-compare' target

* GNU make (3.81) on macOS 10.14(Mojave) does not have the 'undefine' directive.

* Adopted fauxpark's suggestion.

* Update tmk_core/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* update tmk_core/rules.mk

* fix tmk_core/rules.mk

Co-authored-by: Zach White <skullydazed@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-12-31 15:20:56 +09:00

787 lines
22 KiB
C
Raw Blame History

/*
Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include "wait.h"
#include "keycode.h"
#include "host.h"
#include "keymap.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "timer.h"
#include "keyboard.h"
#include "bootloader.h"
#include "action_layer.h"
#include "action_util.h"
#include "eeconfig.h"
#include "sleep_led.h"
#include "led.h"
#include "command.h"
#include "quantum.h"
#include "version.h"
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
#endif
#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED)
# include "mousekey.h"
#endif
#ifdef AUDIO_ENABLE
# include "audio.h"
#endif /* AUDIO_ENABLE */
static bool command_common(uint8_t code);
static void command_common_help(void);
static void print_version(void);
static void print_status(void);
static bool command_console(uint8_t code);
static void command_console_help(void);
#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED)
static bool mousekey_console(uint8_t code);
static void mousekey_console_help(void);
#endif
static void switch_default_layer(uint8_t layer);
command_state_t command_state = ONESHOT;
bool command_proc(uint8_t code) {
switch (command_state) {
case ONESHOT:
if (!IS_COMMAND()) return false;
return (command_extra(code) || command_common(code));
break;
case CONSOLE:
if (IS_COMMAND())
return (command_extra(code) || command_common(code));
else
return (command_console_extra(code) || command_console(code));
break;
#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED)
case MOUSEKEY:
mousekey_console(code);
break;
#endif
default:
command_state = ONESHOT;
return false;
}
return true;
}
/* TODO: Refactoring is needed. */
/* This allows to define extra commands. return false when not processed. */
bool command_extra(uint8_t code) __attribute__((weak));
bool command_extra(uint8_t code) {
(void)code;
return false;
}
bool command_console_extra(uint8_t code) __attribute__((weak));
bool command_console_extra(uint8_t code) {
(void)code;
return false;
}
/***********************************************************
* Command common
***********************************************************/
static void command_common_help(void) {
print("\n\t- Magic -\n" STR(MAGIC_KEY_DEBUG) ": Debug Message Toggle\n" STR(MAGIC_KEY_DEBUG_MATRIX) ": Matrix Debug Mode Toggle - Show keypresses in matrix grid\n" STR(MAGIC_KEY_DEBUG_KBD) ": Keyboard Debug Toggle - Show keypress report\n" STR(MAGIC_KEY_DEBUG_MOUSE) ": Debug Mouse Toggle\n" STR(MAGIC_KEY_VERSION) ": Version\n" STR(MAGIC_KEY_STATUS) ": Status\n" STR(MAGIC_KEY_CONSOLE) ": Activate Console Mode\n"
#if MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
STR(MAGIC_KEY_LAYER0) ": Switch to Layer 0\n" STR(MAGIC_KEY_LAYER1) ": Switch to Layer 1\n" STR(MAGIC_KEY_LAYER2) ": Switch to Layer 2\n" STR(MAGIC_KEY_LAYER3) ": Switch to Layer 3\n" STR(MAGIC_KEY_LAYER4) ": Switch to Layer 4\n" STR(MAGIC_KEY_LAYER5) ": Switch to Layer 5\n" STR(MAGIC_KEY_LAYER6) ": Switch to Layer 6\n" STR(MAGIC_KEY_LAYER7) ": Switch to Layer 7\n" STR(MAGIC_KEY_LAYER8) ": Switch to Layer 8\n" STR(MAGIC_KEY_LAYER9) ": Switch to Layer 9\n"
#endif
#if MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
"F1-F10: Switch to Layer 0-9 (F10 = L0)\n"
#endif
#if MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
"0-9: Switch to Layer 0-9\n"
#endif
STR(MAGIC_KEY_LAYER0_ALT) ": Switch to Layer 0 (alternate)\n"
STR(MAGIC_KEY_BOOTLOADER) ": Jump to Bootloader\n" STR(MAGIC_KEY_BOOTLOADER_ALT) ": Jump to Bootloader (alternate)\n"
#ifdef KEYBOARD_LOCK_ENABLE
STR(MAGIC_KEY_LOCK) ": Lock Keyboard\n"
#endif
STR(MAGIC_KEY_EEPROM) ": Print EEPROM Settings\n" STR(MAGIC_KEY_EEPROM_CLEAR) ": Clear EEPROM\n"
#ifdef NKRO_ENABLE
STR(MAGIC_KEY_NKRO) ": NKRO Toggle\n"
#endif
#ifdef SLEEP_LED_ENABLE
STR(MAGIC_KEY_SLEEP_LED) ": Sleep LED Test\n"
#endif
);
}
static void print_version(void) {
// print version & information
print("\n\t- Version -\n");
print("VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") "
"PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") "
"VER: " STR(DEVICE_VER) "\n");
print("BUILD: (" __DATE__ ")\n");
#ifndef SKIP_VERSION
# ifdef PROTOCOL_CHIBIOS
print("CHIBIOS: " STR(CHIBIOS_VERSION) ", CONTRIB: " STR(CHIBIOS_CONTRIB_VERSION) "\n");
# endif
#endif
/* build options */
print("OPTIONS:"
#ifdef PROTOCOL_LUFA
" LUFA"
#endif
#ifdef PROTOCOL_VUSB
" VUSB"
#endif
#ifdef BOOTMAGIC_ENABLE
" BOOTMAGIC"
#endif
#ifdef MOUSEKEY_ENABLE
" MOUSEKEY"
#endif
#ifdef EXTRAKEY_ENABLE
" EXTRAKEY"
#endif
#ifdef CONSOLE_ENABLE
" CONSOLE"
#endif
#ifdef COMMAND_ENABLE
" COMMAND"
#endif
#ifdef NKRO_ENABLE
" NKRO"
#endif
#ifdef LTO_ENABLE
" LTO"
#endif
" " STR(BOOTLOADER_SIZE) "\n");
print("GCC: " STR(__GNUC__) "." STR(__GNUC_MINOR__) "." STR(__GNUC_PATCHLEVEL__)
#if defined(__AVR__)
" AVR-LIBC: " __AVR_LIBC_VERSION_STRING__ " AVR_ARCH: avr" STR(__AVR_ARCH__)
#endif
"\n");
return;
}
static void print_status(void) {
print("\n\t- Status -\n");
print_val_hex8(host_keyboard_leds());
#ifndef PROTOCOL_VUSB
// these aren't set on the V-USB protocol, so we just ignore them for now
print_val_hex8(keyboard_protocol);
print_val_hex8(keyboard_idle);
#endif
#ifdef NKRO_ENABLE
print_val_hex8(keymap_config.nkro);
#endif
print_val_hex32(timer_read32());
return;
}
static void print_eeconfig(void) {
// Print these variables if NO_PRINT or USER_PRINT are not defined.
#if !defined(NO_PRINT) && !defined(USER_PRINT)
print("default_layer: ");
print_dec(eeconfig_read_default_layer());
print("\n");
debug_config_t dc;
dc.raw = eeconfig_read_debug();
print("debug_config.raw: ");
print_hex8(dc.raw);
print("\n");
print(".enable: ");
print_dec(dc.enable);
print("\n");
print(".matrix: ");
print_dec(dc.matrix);
print("\n");
print(".keyboard: ");
print_dec(dc.keyboard);
print("\n");
print(".mouse: ");
print_dec(dc.mouse);
print("\n");
keymap_config_t kc;
kc.raw = eeconfig_read_keymap();
print("keymap_config.raw: ");
print_hex8(kc.raw);
print("\n");
print(".swap_control_capslock: ");
print_dec(kc.swap_control_capslock);
print("\n");
print(".capslock_to_control: ");
print_dec(kc.capslock_to_control);
print("\n");
print(".swap_lctl_lgui: ");
print_dec(kc.swap_lctl_lgui);
print("\n");
print(".swap_rctl_rgui: ");
print_dec(kc.swap_rctl_rgui);
print("\n");
print(".swap_lalt_lgui: ");
print_dec(kc.swap_lalt_lgui);
print("\n");
print(".swap_ralt_rgui: ");
print_dec(kc.swap_ralt_rgui);
print("\n");
print(".no_gui: ");
print_dec(kc.no_gui);
print("\n");
print(".swap_grave_esc: ");
print_dec(kc.swap_grave_esc);
print("\n");
print(".swap_backslash_backspace: ");
print_dec(kc.swap_backslash_backspace);
print("\n");
print(".nkro: ");
print_dec(kc.nkro);
print("\n");
# ifdef BACKLIGHT_ENABLE
backlight_config_t bc;
bc.raw = eeconfig_read_backlight();
print("backlight_config.raw: ");
print_hex8(bc.raw);
print("\n");
print(".enable: ");
print_dec(bc.enable);
print("\n");
print(".level: ");
print_dec(bc.level);
print("\n");
# endif /* BACKLIGHT_ENABLE */
#endif /* !NO_PRINT */
}
static bool command_common(uint8_t code) {
#ifdef KEYBOARD_LOCK_ENABLE
static host_driver_t *host_driver = 0;
#endif
switch (code) {
#ifdef SLEEP_LED_ENABLE
// test breathing sleep LED
case MAGIC_KC(MAGIC_KEY_SLEEP_LED):
print("Sleep LED Test\n");
sleep_led_toggle();
led_set(host_keyboard_leds());
break;
#endif
// print stored eeprom config
case MAGIC_KC(MAGIC_KEY_EEPROM):
print("eeconfig:\n");
print_eeconfig();
break;
// clear eeprom
case MAGIC_KC(MAGIC_KEY_EEPROM_CLEAR):
print("Clearing EEPROM\n");
eeconfig_init();
break;
#ifdef KEYBOARD_LOCK_ENABLE
// lock/unlock keyboard
case MAGIC_KC(MAGIC_KEY_LOCK):
if (host_get_driver()) {
host_driver = host_get_driver();
clear_keyboard();
host_set_driver(0);
print("Locked.\n");
} else {
host_set_driver(host_driver);
print("Unlocked.\n");
}
break;
#endif
// print help
case MAGIC_KC(MAGIC_KEY_HELP):
case MAGIC_KC(MAGIC_KEY_HELP_ALT):
command_common_help();
break;
// activate console
case MAGIC_KC(MAGIC_KEY_CONSOLE):
debug_matrix = false;
debug_keyboard = false;
debug_mouse = false;
debug_enable = false;
command_console_help();
print("C> ");
command_state = CONSOLE;
break;
// jump to bootloader
case MAGIC_KC(MAGIC_KEY_BOOTLOADER):
case MAGIC_KC(MAGIC_KEY_BOOTLOADER_ALT):
print("\n\nJumping to bootloader... ");
reset_keyboard();
break;
// debug toggle
case MAGIC_KC(MAGIC_KEY_DEBUG):
debug_enable = !debug_enable;
if (debug_enable) {
print("\ndebug: on\n");
} else {
print("\ndebug: off\n");
debug_matrix = false;
debug_keyboard = false;
debug_mouse = false;
}
break;
// debug matrix toggle
case MAGIC_KC(MAGIC_KEY_DEBUG_MATRIX):
debug_matrix = !debug_matrix;
if (debug_matrix) {
print("\nmatrix: on\n");
debug_enable = true;
} else {
print("\nmatrix: off\n");
}
break;
// debug keyboard toggle
case MAGIC_KC(MAGIC_KEY_DEBUG_KBD):
debug_keyboard = !debug_keyboard;
if (debug_keyboard) {
print("\nkeyboard: on\n");
debug_enable = true;
} else {
print("\nkeyboard: off\n");
}
break;
// debug mouse toggle
case MAGIC_KC(MAGIC_KEY_DEBUG_MOUSE):
debug_mouse = !debug_mouse;
if (debug_mouse) {
print("\nmouse: on\n");
debug_enable = true;
} else {
print("\nmouse: off\n");
}
break;
// print version
case MAGIC_KC(MAGIC_KEY_VERSION):
print_version();
break;
// print status
case MAGIC_KC(MAGIC_KEY_STATUS):
print_status();
break;
#ifdef NKRO_ENABLE
// NKRO toggle
case MAGIC_KC(MAGIC_KEY_NKRO):
clear_keyboard(); // clear to prevent stuck keys
keymap_config.nkro = !keymap_config.nkro;
if (keymap_config.nkro) {
print("NKRO: on\n");
} else {
print("NKRO: off\n");
}
break;
#endif
// switch layers
case MAGIC_KC(MAGIC_KEY_LAYER0_ALT):
switch_default_layer(0);
break;
#if MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
case MAGIC_KC(MAGIC_KEY_LAYER0):
switch_default_layer(0);
break;
case MAGIC_KC(MAGIC_KEY_LAYER1):
switch_default_layer(1);
break;
case MAGIC_KC(MAGIC_KEY_LAYER2):
switch_default_layer(2);
break;
case MAGIC_KC(MAGIC_KEY_LAYER3):
switch_default_layer(3);
break;
case MAGIC_KC(MAGIC_KEY_LAYER4):
switch_default_layer(4);
break;
case MAGIC_KC(MAGIC_KEY_LAYER5):
switch_default_layer(5);
break;
case MAGIC_KC(MAGIC_KEY_LAYER6):
switch_default_layer(6);
break;
case MAGIC_KC(MAGIC_KEY_LAYER7):
switch_default_layer(7);
break;
case MAGIC_KC(MAGIC_KEY_LAYER8):
switch_default_layer(8);
break;
case MAGIC_KC(MAGIC_KEY_LAYER9):
switch_default_layer(9);
break;
#endif
#if MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
case KC_F1 ... KC_F9:
switch_default_layer((code - KC_F1) + 1);
break;
case KC_F10:
switch_default_layer(0);
break;
#endif
#if MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
case KC_1 ... KC_9:
switch_default_layer((code - KC_1) + 1);
break;
case KC_0:
switch_default_layer(0);
break;
#endif
default:
print("?");
return false;
}
return true;
}
/***********************************************************
* Command console
***********************************************************/
static void command_console_help(void) {
print("\n\t- Console -\n"
"ESC/q: quit\n"
#ifdef MOUSEKEY_ENABLE
"m: mousekey\n"
#endif
);
}
static bool command_console(uint8_t code) {
switch (code) {
case KC_H:
case KC_SLASH: /* ? */
command_console_help();
break;
case KC_Q:
case KC_ESC:
command_state = ONESHOT;
return false;
#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED)
case KC_M:
mousekey_console_help();
print("M> ");
command_state = MOUSEKEY;
return true;
#endif
default:
print("?");
return false;
}
print("C> ");
return true;
}
#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED)
/***********************************************************
* Mousekey console
***********************************************************/
static uint8_t mousekey_param = 0;
static void mousekey_param_print(void) {
// Print these variables if NO_PRINT or USER_PRINT are not defined.
# if !defined(NO_PRINT) && !defined(USER_PRINT)
print("\n\t- Values -\n");
print("1: delay(*10ms): ");
pdec(mk_delay);
print("\n");
print("2: interval(ms): ");
pdec(mk_interval);
print("\n");
print("3: max_speed: ");
pdec(mk_max_speed);
print("\n");
print("4: time_to_max: ");
pdec(mk_time_to_max);
print("\n");
print("5: wheel_max_speed: ");
pdec(mk_wheel_max_speed);
print("\n");
print("6: wheel_time_to_max: ");
pdec(mk_wheel_time_to_max);
print("\n");
# endif /* !NO_PRINT */
}
//#define PRINT_SET_VAL(v) print(#v " = "); print_dec(v); print("\n");
# define PRINT_SET_VAL(v) xprintf(# v " = %d\n", (v))
static void mousekey_param_inc(uint8_t param, uint8_t inc) {
switch (param) {
case 1:
if (mk_delay + inc < UINT8_MAX)
mk_delay += inc;
else
mk_delay = UINT8_MAX;
PRINT_SET_VAL(mk_delay);
break;
case 2:
if (mk_interval + inc < UINT8_MAX)
mk_interval += inc;
else
mk_interval = UINT8_MAX;
PRINT_SET_VAL(mk_interval);
break;
case 3:
if (mk_max_speed + inc < UINT8_MAX)
mk_max_speed += inc;
else
mk_max_speed = UINT8_MAX;
PRINT_SET_VAL(mk_max_speed);
break;
case 4:
if (mk_time_to_max + inc < UINT8_MAX)
mk_time_to_max += inc;
else
mk_time_to_max = UINT8_MAX;
PRINT_SET_VAL(mk_time_to_max);
break;
case 5:
if (mk_wheel_max_speed + inc < UINT8_MAX)
mk_wheel_max_speed += inc;
else
mk_wheel_max_speed = UINT8_MAX;
PRINT_SET_VAL(mk_wheel_max_speed);
break;
case 6:
if (mk_wheel_time_to_max + inc < UINT8_MAX)
mk_wheel_time_to_max += inc;
else
mk_wheel_time_to_max = UINT8_MAX;
PRINT_SET_VAL(mk_wheel_time_to_max);
break;
}
}
static void mousekey_param_dec(uint8_t param, uint8_t dec) {
switch (param) {
case 1:
if (mk_delay > dec)
mk_delay -= dec;
else
mk_delay = 0;
PRINT_SET_VAL(mk_delay);
break;
case 2:
if (mk_interval > dec)
mk_interval -= dec;
else
mk_interval = 0;
PRINT_SET_VAL(mk_interval);
break;
case 3:
if (mk_max_speed > dec)
mk_max_speed -= dec;
else
mk_max_speed = 0;
PRINT_SET_VAL(mk_max_speed);
break;
case 4:
if (mk_time_to_max > dec)
mk_time_to_max -= dec;
else
mk_time_to_max = 0;
PRINT_SET_VAL(mk_time_to_max);
break;
case 5:
if (mk_wheel_max_speed > dec)
mk_wheel_max_speed -= dec;
else
mk_wheel_max_speed = 0;
PRINT_SET_VAL(mk_wheel_max_speed);
break;
case 6:
if (mk_wheel_time_to_max > dec)
mk_wheel_time_to_max -= dec;
else
mk_wheel_time_to_max = 0;
PRINT_SET_VAL(mk_wheel_time_to_max);
break;
}
}
static void mousekey_console_help(void) {
print("\n\t- Mousekey -\n"
"ESC/q: quit\n"
"1: delay(*10ms)\n"
"2: interval(ms)\n"
"3: max_speed\n"
"4: time_to_max\n"
"5: wheel_max_speed\n"
"6: wheel_time_to_max\n"
"\n"
"p: print values\n"
"d: set defaults\n"
"up: +1\n"
"down: -1\n"
"pgup: +10\n"
"pgdown: -10\n"
"\n"
"speed = delta * max_speed * (repeat / time_to_max)\n");
xprintf("where delta: cursor=%d, wheel=%d\n"
"See http://en.wikipedia.org/wiki/Mouse_keys\n",
MOUSEKEY_MOVE_DELTA, MOUSEKEY_WHEEL_DELTA);
}
static bool mousekey_console(uint8_t code) {
switch (code) {
case KC_H:
case KC_SLASH: /* ? */
mousekey_console_help();
break;
case KC_Q:
case KC_ESC:
if (mousekey_param) {
mousekey_param = 0;
} else {
print("C> ");
command_state = CONSOLE;
return false;
}
break;
case KC_P:
mousekey_param_print();
break;
case KC_1:
case KC_2:
case KC_3:
case KC_4:
case KC_5:
case KC_6:
mousekey_param = numkey2num(code);
break;
case KC_UP:
mousekey_param_inc(mousekey_param, 1);
break;
case KC_DOWN:
mousekey_param_dec(mousekey_param, 1);
break;
case KC_PGUP:
mousekey_param_inc(mousekey_param, 10);
break;
case KC_PGDN:
mousekey_param_dec(mousekey_param, 10);
break;
case KC_D:
mk_delay = MOUSEKEY_DELAY / 10;
mk_interval = MOUSEKEY_INTERVAL;
mk_max_speed = MOUSEKEY_MAX_SPEED;
mk_time_to_max = MOUSEKEY_TIME_TO_MAX;
mk_wheel_max_speed = MOUSEKEY_WHEEL_MAX_SPEED;
mk_wheel_time_to_max = MOUSEKEY_WHEEL_TIME_TO_MAX;
print("set default\n");
break;
default:
print("?");
return false;
}
if (mousekey_param) {
xprintf("M%d> ", mousekey_param);
} else {
print("M>");
}
return true;
}
#endif
/***********************************************************
* Utilities
***********************************************************/
uint8_t numkey2num(uint8_t code) {
switch (code) {
case KC_1:
return 1;
case KC_2:
return 2;
case KC_3:
return 3;
case KC_4:
return 4;
case KC_5:
return 5;
case KC_6:
return 6;
case KC_7:
return 7;
case KC_8:
return 8;
case KC_9:
return 9;
case KC_0:
return 0;
}
return 0;
}
static void switch_default_layer(uint8_t layer) {
xprintf("L%d\n", layer);
default_layer_set(1UL << layer);
clear_keyboard();
}
View git blame Copy permalink