varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/converter/xt_usb
History
noroadsleft 72bd17f290 converter/xt_usb: Configurator support (#4657)
2018-12-15 07:25:29 -08:00
..
keymaps/default Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
config.h Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
info.json converter/xt_usb: Configurator support (#4657) 2018-12-15 07:25:29 -08:00
led.c Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
matrix.c Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
README.md Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
rules.mk Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
xt_usb.c Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
xt_usb.h Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00

README.md

XT to USB keyboard converter

This is a port of TMK's converter/xt_usb to QMK.

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

  1. Connect Vcc and GND.
  2. Connect Clock and Data line. Clock is on PD1, Data on PD0 by default. And optionally you can use PB7 for Reset.(Compatible to Soarer's converter) To change pin configuration edit config.h.
  3. You need pull-up resistor. 1K-10K Ohm will be OK.

XT keyboard protocol resource

https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol