forked from forks/qmk_firmware
281 lines
9.5 KiB
C
281 lines
9.5 KiB
C
/* Copyright 2017 Jason Williams
|
|
* Copyright 2018 Jack Humbert
|
|
* Copyright 2018 Yiancar
|
|
* Copyright 2021 Doni Crosby
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "is31fl3733.h"
|
|
#include "i2c_master.h"
|
|
#include "gpio.h"
|
|
#include "wait.h"
|
|
|
|
#define IS31FL3733_PWM_REGISTER_COUNT 192
|
|
#define IS31FL3733_LED_CONTROL_REGISTER_COUNT 24
|
|
|
|
#ifndef IS31FL3733_I2C_TIMEOUT
|
|
# define IS31FL3733_I2C_TIMEOUT 100
|
|
#endif
|
|
|
|
#ifndef IS31FL3733_I2C_PERSISTENCE
|
|
# define IS31FL3733_I2C_PERSISTENCE 0
|
|
#endif
|
|
|
|
#ifndef IS31FL3733_PWM_FREQUENCY
|
|
# define IS31FL3733_PWM_FREQUENCY IS31FL3733_PWM_FREQUENCY_8K4_HZ // PFS - IS31FL3733B only
|
|
#endif
|
|
|
|
#ifndef IS31FL3733_SW_PULLUP
|
|
# define IS31FL3733_SW_PULLUP IS31FL3733_PUR_0_OHM
|
|
#endif
|
|
|
|
#ifndef IS31FL3733_CS_PULLDOWN
|
|
# define IS31FL3733_CS_PULLDOWN IS31FL3733_PDR_0_OHM
|
|
#endif
|
|
|
|
#ifndef IS31FL3733_GLOBAL_CURRENT
|
|
# define IS31FL3733_GLOBAL_CURRENT 0xFF
|
|
#endif
|
|
|
|
#ifndef IS31FL3733_SYNC_1
|
|
# define IS31FL3733_SYNC_1 IS31FL3733_SYNC_NONE
|
|
#endif
|
|
#ifndef IS31FL3733_SYNC_2
|
|
# define IS31FL3733_SYNC_2 IS31FL3733_SYNC_NONE
|
|
#endif
|
|
#ifndef IS31FL3733_SYNC_3
|
|
# define IS31FL3733_SYNC_3 IS31FL3733_SYNC_NONE
|
|
#endif
|
|
#ifndef IS31FL3733_SYNC_4
|
|
# define IS31FL3733_SYNC_4 IS31FL3733_SYNC_NONE
|
|
#endif
|
|
|
|
const uint8_t i2c_addresses[IS31FL3733_DRIVER_COUNT] = {
|
|
IS31FL3733_I2C_ADDRESS_1,
|
|
#ifdef IS31FL3733_I2C_ADDRESS_2
|
|
IS31FL3733_I2C_ADDRESS_2,
|
|
# ifdef IS31FL3733_I2C_ADDRESS_3
|
|
IS31FL3733_I2C_ADDRESS_3,
|
|
# ifdef IS31FL3733_I2C_ADDRESS_4
|
|
IS31FL3733_I2C_ADDRESS_4,
|
|
# endif
|
|
# endif
|
|
#endif
|
|
};
|
|
|
|
const uint8_t driver_sync[IS31FL3733_DRIVER_COUNT] = {
|
|
IS31FL3733_SYNC_1,
|
|
#ifdef IS31FL3733_I2C_ADDRESS_2
|
|
IS31FL3733_SYNC_2,
|
|
# ifdef IS31FL3733_I2C_ADDRESS_3
|
|
IS31FL3733_SYNC_3,
|
|
# ifdef IS31FL3733_I2C_ADDRESS_4
|
|
IS31FL3733_SYNC_4,
|
|
# endif
|
|
# endif
|
|
#endif
|
|
};
|
|
|
|
// These buffers match the IS31FL3733 PWM registers.
|
|
// The control buffers match the page 0 LED On/Off registers.
|
|
// Storing them like this is optimal for I2C transfers to the registers.
|
|
// We could optimize this and take out the unused registers from these
|
|
// buffers and the transfers in is31fl3733_write_pwm_buffer() but it's
|
|
// probably not worth the extra complexity.
|
|
typedef struct is31fl3733_driver_t {
|
|
uint8_t pwm_buffer[IS31FL3733_PWM_REGISTER_COUNT];
|
|
bool pwm_buffer_dirty;
|
|
uint8_t led_control_buffer[IS31FL3733_LED_CONTROL_REGISTER_COUNT];
|
|
bool led_control_buffer_dirty;
|
|
} PACKED is31fl3733_driver_t;
|
|
|
|
is31fl3733_driver_t driver_buffers[IS31FL3733_DRIVER_COUNT] = {{
|
|
.pwm_buffer = {0},
|
|
.pwm_buffer_dirty = false,
|
|
.led_control_buffer = {0},
|
|
.led_control_buffer_dirty = false,
|
|
}};
|
|
|
|
void is31fl3733_write_register(uint8_t index, uint8_t reg, uint8_t data) {
|
|
#if IS31FL3733_I2C_PERSISTENCE > 0
|
|
for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
|
|
if (i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3733_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
|
|
}
|
|
#else
|
|
i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3733_I2C_TIMEOUT);
|
|
#endif
|
|
}
|
|
|
|
void is31fl3733_select_page(uint8_t index, uint8_t page) {
|
|
is31fl3733_write_register(index, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
|
|
is31fl3733_write_register(index, IS31FL3733_REG_COMMAND, page);
|
|
}
|
|
|
|
void is31fl3733_write_pwm_buffer(uint8_t index) {
|
|
// Assumes page 1 is already selected.
|
|
// Transmit PWM registers in 12 transfers of 16 bytes.
|
|
|
|
// Iterate over the pwm_buffer contents at 16 byte intervals.
|
|
for (uint8_t i = 0; i < IS31FL3733_PWM_REGISTER_COUNT; i += 16) {
|
|
#if IS31FL3733_I2C_PERSISTENCE > 0
|
|
for (uint8_t j = 0; j < IS31FL3733_I2C_PERSISTENCE; j++) {
|
|
if (i2c_write_register(i2c_addresses[index] << 1, i, driver_buffers[index].pwm_buffer + i, 16, IS31FL3733_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
|
|
}
|
|
#else
|
|
i2c_write_register(i2c_addresses[index] << 1, i, driver_buffers[index].pwm_buffer + i, 16, IS31FL3733_I2C_TIMEOUT);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void is31fl3733_init_drivers(void) {
|
|
i2c_init();
|
|
|
|
#if defined(IS31FL3733_SDB_PIN)
|
|
gpio_set_pin_output(IS31FL3733_SDB_PIN);
|
|
gpio_write_pin_high(IS31FL3733_SDB_PIN);
|
|
#endif
|
|
|
|
for (uint8_t i = 0; i < IS31FL3733_DRIVER_COUNT; i++) {
|
|
is31fl3733_init(i);
|
|
}
|
|
|
|
for (int i = 0; i < IS31FL3733_LED_COUNT; i++) {
|
|
is31fl3733_set_led_control_register(i, true, true, true);
|
|
}
|
|
|
|
for (uint8_t i = 0; i < IS31FL3733_DRIVER_COUNT; i++) {
|
|
is31fl3733_update_led_control_registers(i);
|
|
}
|
|
}
|
|
|
|
void is31fl3733_init(uint8_t index) {
|
|
// In order to avoid the LEDs being driven with garbage data
|
|
// in the LED driver's PWM registers, shutdown is enabled last.
|
|
// Set up the mode and other settings, clear the PWM registers,
|
|
// then disable software shutdown.
|
|
|
|
is31fl3733_select_page(index, IS31FL3733_COMMAND_LED_CONTROL);
|
|
|
|
// Turn off all LEDs.
|
|
for (uint8_t i = 0; i < IS31FL3733_LED_CONTROL_REGISTER_COUNT; i++) {
|
|
is31fl3733_write_register(index, i, 0x00);
|
|
}
|
|
|
|
is31fl3733_select_page(index, IS31FL3733_COMMAND_PWM);
|
|
|
|
// Set PWM on all LEDs to 0
|
|
// No need to setup Breath registers to PWM as that is the default.
|
|
for (uint8_t i = 0; i < IS31FL3733_PWM_REGISTER_COUNT; i++) {
|
|
is31fl3733_write_register(index, i, 0x00);
|
|
}
|
|
|
|
is31fl3733_select_page(index, IS31FL3733_COMMAND_FUNCTION);
|
|
|
|
uint8_t sync = driver_sync[index];
|
|
|
|
// Set de-ghost pull-up resistors (SWx)
|
|
is31fl3733_write_register(index, IS31FL3733_FUNCTION_REG_SW_PULLUP, IS31FL3733_SW_PULLUP);
|
|
// Set de-ghost pull-down resistors (CSx)
|
|
is31fl3733_write_register(index, IS31FL3733_FUNCTION_REG_CS_PULLDOWN, IS31FL3733_CS_PULLDOWN);
|
|
// Set global current to maximum.
|
|
is31fl3733_write_register(index, IS31FL3733_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3733_GLOBAL_CURRENT);
|
|
// Disable software shutdown.
|
|
is31fl3733_write_register(index, IS31FL3733_FUNCTION_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
|
|
|
|
// Wait 10ms to ensure the device has woken up.
|
|
wait_ms(10);
|
|
}
|
|
|
|
void is31fl3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
|
|
is31fl3733_led_t led;
|
|
|
|
if (index >= 0 && index < IS31FL3733_LED_COUNT) {
|
|
memcpy_P(&led, (&g_is31fl3733_leds[index]), sizeof(led));
|
|
|
|
if (driver_buffers[led.driver].pwm_buffer[led.r] == red && driver_buffers[led.driver].pwm_buffer[led.g] == green && driver_buffers[led.driver].pwm_buffer[led.b] == blue) {
|
|
return;
|
|
}
|
|
|
|
driver_buffers[led.driver].pwm_buffer[led.r] = red;
|
|
driver_buffers[led.driver].pwm_buffer[led.g] = green;
|
|
driver_buffers[led.driver].pwm_buffer[led.b] = blue;
|
|
driver_buffers[led.driver].pwm_buffer_dirty = true;
|
|
}
|
|
}
|
|
|
|
void is31fl3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
|
|
for (int i = 0; i < IS31FL3733_LED_COUNT; i++) {
|
|
is31fl3733_set_color(i, red, green, blue);
|
|
}
|
|
}
|
|
|
|
void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
|
|
is31fl3733_led_t led;
|
|
memcpy_P(&led, (&g_is31fl3733_leds[index]), sizeof(led));
|
|
|
|
uint8_t control_register_r = led.r / 8;
|
|
uint8_t control_register_g = led.g / 8;
|
|
uint8_t control_register_b = led.b / 8;
|
|
uint8_t bit_r = led.r % 8;
|
|
uint8_t bit_g = led.g % 8;
|
|
uint8_t bit_b = led.b % 8;
|
|
|
|
if (red) {
|
|
driver_buffers[led.driver].led_control_buffer[control_register_r] |= (1 << bit_r);
|
|
} else {
|
|
driver_buffers[led.driver].led_control_buffer[control_register_r] &= ~(1 << bit_r);
|
|
}
|
|
if (green) {
|
|
driver_buffers[led.driver].led_control_buffer[control_register_g] |= (1 << bit_g);
|
|
} else {
|
|
driver_buffers[led.driver].led_control_buffer[control_register_g] &= ~(1 << bit_g);
|
|
}
|
|
if (blue) {
|
|
driver_buffers[led.driver].led_control_buffer[control_register_b] |= (1 << bit_b);
|
|
} else {
|
|
driver_buffers[led.driver].led_control_buffer[control_register_b] &= ~(1 << bit_b);
|
|
}
|
|
|
|
driver_buffers[led.driver].led_control_buffer_dirty = true;
|
|
}
|
|
|
|
void is31fl3733_update_pwm_buffers(uint8_t index) {
|
|
if (driver_buffers[index].pwm_buffer_dirty) {
|
|
is31fl3733_select_page(index, IS31FL3733_COMMAND_PWM);
|
|
|
|
is31fl3733_write_pwm_buffer(index);
|
|
|
|
driver_buffers[index].pwm_buffer_dirty = false;
|
|
}
|
|
}
|
|
|
|
void is31fl3733_update_led_control_registers(uint8_t index) {
|
|
if (driver_buffers[index].led_control_buffer_dirty) {
|
|
is31fl3733_select_page(index, IS31FL3733_COMMAND_LED_CONTROL);
|
|
|
|
for (uint8_t i = 0; i < IS31FL3733_LED_CONTROL_REGISTER_COUNT; i++) {
|
|
is31fl3733_write_register(index, i, driver_buffers[index].led_control_buffer[i]);
|
|
}
|
|
|
|
driver_buffers[index].led_control_buffer_dirty = false;
|
|
}
|
|
}
|
|
|
|
void is31fl3733_flush(void) {
|
|
for (uint8_t i = 0; i < IS31FL3733_DRIVER_COUNT; i++) {
|
|
is31fl3733_update_pwm_buffers(i);
|
|
}
|
|
}
|