History

Ryan b0eda7701a Move keyboard USB IDs and strings to data driven, pass 3 (#18111 )		2022-08-21 23:08:50 +01:00
..
keymaps
rev1	Move keyboard USB IDs and strings to data driven, pass 3 (#18111 )	2022-08-21 23:08:50 +01:00
rev2	Move keyboard USB IDs and strings to data driven, pass 3 (#18111 )	2022-08-21 23:08:50 +01:00
rev3	Move keyboard USB IDs and strings to data driven, pass 3 (#18111 )	2022-08-21 23:08:50 +01:00
.noci
config.h	Move keyboard USB IDs and strings to data driven: Y (#17926 )	2022-08-06 18:52:13 +10:00
info.json	Move keyboard USB IDs and strings to data driven: Y (#17926 )	2022-08-06 18:52:13 +10:00
readme.md
rules.mk
ymd75.c
ymd75.h

readme.md

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

This firmware can also be flashed onto the KBDFans KBD75 Round 2 Bootmapper Client boards sold during the mid-2018 timeframe.

Keyboard Maintainer: Wayne K Jones
Hardware Supported:
- rev1 (ATmega32a)
- rev2 (ATmega32a)
- rev3 (ATmega32u4)
Hardware Availability: https://www.aliexpress.com/item/32812690592.html

Make example for this keyboard (after setting up your build environment):

make ymdk/ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymdk/ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.