varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/blank/blank01
History
Ryan f9aeea64c1
Migrate MCU and BOOTLOADER to data-driven (#19529)
2023-02-08 18:41:46 +11:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
blank01.c [Keyboard] Add blank01 keyboard (#14698) 2021-10-11 02:54:04 -07:00
blank01.h [Keyboard] Add blank01 keyboard (#14698) 2021-10-11 02:54:04 -07:00
config.h Remove unused SOFT_SERIAL_PIN from config.h (#19768) 2023-02-07 14:46:51 +00:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

BLANK.01

60% keyboard

  • Keyboard Maintainer: gkeyboard
  • Hardware Supported: BLANK.01 PCB
  • Hardware Availability: Soon

Make example for this keyboard (after setting up your build environment):

make blank/blank01:default

Flashing example for this keyboard:

make blank/blank01:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the front of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available