varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/handwired/nortontechpad
History
James Young a1c1427594
Migrate LOCKING_*_ENABLE to Data-Driven: H, Part 3 (#23763) 
Affects:

  - `handwired/jn68m`
  - `handwired/jopr`
  - `handwired/jot50`
  - `handwired/jotanck`
  - `handwired/jotpad16`
  - `handwired/jtallbean/split_65`
  - `handwired/juliet`
  - `handwired/k_numpad17`
  - `handwired/kbod`
  - `handwired/ks63`
  - `handwired/leftynumpad`
  - `handwired/lemonpad`
  - `handwired/m40/5x5_macropad`
  - `handwired/macroboard/f401`
  - `handwired/macroboard/f411`
  - `handwired/magicforce61`
  - `handwired/magicforce68`
  - `handwired/mechboards_micropad`
  - `handwired/minorca`
  - `handwired/mutepad`
  - `handwired/nicekey`
  - `handwired/nortontechpad`
  - `handwired/not_so_minidox`
  - `handwired/novem`
  - `handwired/nozbe_macro`
  - `handwired/numpad20`
  - `handwired/obuwunkunubi/spaget`
  - `handwired/oem_ansi_fullsize`
  - `handwired/onekey`
  - `handwired/ortho5x13`
  - `handwired/ortho5x14`
  - `handwired/p65rgb`
  - `handwired/pilcrow`
  - `handwired/polly40`
  - `handwired/postageboard/mini`
  - `handwired/postageboard/r1`
  - `handwired/prime_exl`
  - `handwired/prime_exl_plus`
2024-05-22 00:03:56 +01:00
..
keymaps
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: H, Part 3 (#23763) 2024-05-22 00:03:56 +01:00
readme.md

readme.md

NortonTechPad

The NortonTechPad is a numpad inspired by the SiCK-Pad,it is also 3D printed and designed to be inexpensive.

  • Keyboard Maintainer: NortonTech
  • Hardware Supported: Pro Micro

Make example for this keyboard (after setting up your build environment):

make handwired/nortontechpad:default

Flashing example for this keyboard:

make handwired/nortontechpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear EEPROM, so it is a good first step if the keyboard is misbehaving.
  • Physical reset button: Short the GND and RST pins on the Pro Micro with something conductive.
  • Keycode in layout: There is no key mapped to QK_BOOT in the pre-created keymaps, but you may assign this key in any keymaps you create.