varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/tzarc/ghoul
History
Ryan 798cbfe6a3
Fix info.json LTO and format encoder definitions (#20456)
2023-04-15 23:37:24 -06:00
..
graphics
keymaps/default Encodermap direction define. (#20454) 2023-04-15 16:18:44 +01:00
rev1 Fix info.json LTO and format encoder definitions (#20456) 2023-04-15 23:37:24 -06:00
config.h [chore] keyboards/tzarc: Alignment with clang-format. (#20265) 2023-03-26 23:56:09 +01:00
ghoul.c Clean up usage of QMK_KEYBOARD_H (#20167) 2023-03-20 08:12:05 +11:00
info.json Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00
readme.md
rules.mk Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

Ghoul

Ghoul

Planck-like development board for QMK, using SparkFun MicroMod for hot-swap MCU capability.

  • Keyboard Maintainer: tzarc
  • Hardware Supported: Ghoul rev1 PCB + MicroMod STM32, MicroMod RP2040
  • Hardware Availability: Open-source

Make example for this keyboard (after setting up your build environment):

make tzarc/ghoul/rev1/stm32:default
make tzarc/ghoul/rev1/rp2040:default

Flashing example for this keyboard:

make tzarc/ghoul/rev1/stm32:default:flash
make tzarc/ghoul/rev1/rp2040:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top-left key (usually Escape) and plug in the keyboard
  • Physical reset button: Either press all 5 left-most keys on the bottom row, or hold BOOT and press RESET
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available