forked from forks/qmk_firmware
19c504662e
* add dz60rgb keyboard * add info.json * Update config.h * Update rules.mk * Update dz60rgb.h * Update dz60rgb.c * Update keymap.c * Update dz60rgb.h * Create readme.md * Update readme.md * Update keymap.c * Update dz60rgb.h * Update info.json
58 lines
1.8 KiB
Makefile
58 lines
1.8 KiB
Makefile
# project specific files
|
|
|
|
## chip/board settings
|
|
# the next two should match the directories in
|
|
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
MCU_FAMILY = STM32
|
|
MCU_SERIES = STM32F3xx
|
|
|
|
# Linker script to use
|
|
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
# or <this_dir>/ld/
|
|
MCU_LDSCRIPT = STM32F303xC
|
|
|
|
# Startup code to use
|
|
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
|
MCU_STARTUP = stm32f3xx
|
|
|
|
# Board: it should exist either in <chibios>/os/hal/boards/
|
|
# or <this_dir>/boards
|
|
BOARD = GENERIC_STM32_F303XC
|
|
|
|
# Cortex version
|
|
MCU = cortex-m4
|
|
|
|
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
ARMV = 7
|
|
|
|
USE_FPU = yes
|
|
|
|
# Vector table for application
|
|
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
|
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
|
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
|
|
OPT_DEFS =
|
|
|
|
# Do not put the microcontroller into power saving mode
|
|
# when we get USB suspend event. We want it to keep updating
|
|
# backlight effects.
|
|
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
|
|
|
|
# Options to pass to dfu-util when flashing
|
|
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
|
|
# Build Options
|
|
# comment out to disable the options.
|
|
#
|
|
BACKLIGHT_ENABLE = no
|
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
CONSOLE_ENABLE = no # Console for debug
|
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
|
NKRO_ENABLE = no # USB Nkey Rollover
|
|
AUDIO_ENABLE = no
|
|
RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
|
|
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
|