varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/0xc7/61key
History
Ryan ccb6c908dd
Remove SOFT_SERIAL_PIN for non-split boards (#19774) 
* Remove `SOFT_SERIAL_PIN` for non-split boards

* Delete more empty config.h
2023-02-08 23:57:42 +00:00
..
keymaps Deprecate KC_LOCK for QK_LOCK (#18796) 2022-10-21 15:46:10 +01:00
61key.c [Keyboard] Add 61Key (#14259) 2021-09-08 19:14:03 -07:00
61key.h 0xc7/61key touch-up (#14712) 2021-10-05 16:37:42 -07:00
config.h Remove SOFT_SERIAL_PIN for non-split boards (#19774) 2023-02-08 23:57:42 +00:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

61Key

61Key

Custom keyboard designed by RealEmanGaming aka 0xC7

  • Keyboard Maintainer: 0xC7
  • Hardware Supported: ATMega32u4
  • Hardware Availability: N/A (private board, might open source)

Make example for this keyboard (after setting up your build environment):

make 0xc7/61key:default

Flashing example for this keyboard:

make 0xc7/61key:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available