varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/4pplet/eagle_viper_rep
History
James Young ce417226b2
4pplet/eagle_viper_rep/rev_a Layout Macro Conversion and Additions (#20414) 
* info.json: apply friendly formatting

* add matrix_diagram.md

* move matrix data to info.json

* add LAYOUT_60_ansi_split_bs_rshift

* add LAYOUT_60_tsangan_hhkb

* add LAYOUT_60_hhkb
2023-04-12 14:29:29 -07:00
..
rev_a 4pplet/eagle_viper_rep/rev_a Layout Macro Conversion and Additions (#20414) 2023-04-12 14:29:29 -07:00
rev_b Move backlight config to data driven (#19910) 2023-02-26 08:37:57 +11:00
readme.md Adding "Eagle Viper Rep", open sourced Eagle/Viper V2/V3 PCB (#13020) 2021-06-22 08:09:16 +10:00

readme.md

Viper/Eagle REP Rev A

A alternative PCB for Viper and Eagle V2 and V3

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Viper/Eagle REP Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/eagle_viper_rep/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.