varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/keyten/kt60_m
History
Ryan 2da0827d4f
Remove matrix size defines (#19581)
2023-02-17 16:08:25 +11:00
..
keymaps keyten kt60-M: rename LAYOUT to LAYOUT_60_tsangan_hhkb (#16307) 2022-02-10 16:22:42 +00:00
config.h Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
kt60_m.c Fixup line endings for kt60-M. 2022-02-03 03:19:08 +11:00
kt60_m.h keyten kt60-M: rename LAYOUT to LAYOUT_60_tsangan_hhkb (#16307) 2022-02-10 16:22:42 +00:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

keyten kt60-M

60% MX PCB with a minimum number of required layouts.

kt60-M image

  • Keyboard Maintainer: keyten
  • Hardware Supported: keyten kt60-M
  • Hardware Availability: GB

Make example for this keyboard (after setting up your build environment):

make keyten/kt60_m:default

Flashing example for this keyboard:

make keyten/kt60_m:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available
  • Physical reset button: Press the button on the back of the PCB