1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/keyboards/ergodox_ez/config.h

180 lines
6.4 KiB
C

/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
Copyright 2015 ZSA Technology Labs Inc (@zsa)
Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* key matrix size */
#define MATRIX_ROWS 14
#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
#define MATRIX_COLS 6
#define COL_EXPANDED { true, true, true, true, true, true, true, false, false, false, false, false, false, false }
#define MATRIX_ONBOARD_ROW_PINS { 0, 0, 0, 0, 0, 0, 0, B0, B1, B2, B3, D2, D3, C6 }
#define MATRIX_ONBOARD_COL_PINS { F0, F1, F4, F5, F6, F7 }
#define DIODE_DIRECTION COL2ROW
#define EXPANDER_COL_REGISTER GPIOB
#define EXPANDER_ROW_REGISTER GPIOA
#define MATRIX_EXPANDER_COL_PINS { 5, 4, 3, 2, 1, 0 }
#define MATRIX_EXPANDER_ROW_PINS { 0, 1, 2, 3, 4, 5, 6 }
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_DELAY 0
#define MOUSEKEY_TIME_TO_MAX 60
#define MOUSEKEY_MAX_SPEED 7
#define MOUSEKEY_WHEEL_DELAY 400
#define MOUSEKEY_WHEEL_INTERVAL MOUSEKEY_INTERVAL
#define MOUSEKEY_WHEEL_MAX_SPEED MOUSEKEY_MAX_SPEED
#define MOUSEKEY_WHEEL_TIME_TO_MAX MOUSEKEY_TIME_TO_MAX
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
)
#ifndef LED_BRIGHTNESS_LO
#define LED_BRIGHTNESS_LO 15
#endif
#ifndef LED_BRIGHTNESS_HI
#define LED_BRIGHTNESS_HI 255
#endif
#define LED_BRIGHTNESS_DEFAULT (LED_BRIGHTNESS_HI)
// Pick one of the modes
// Defaults to 15 mirror, for legacy behavior
// #define ERGODOX_LED_15 // Addresses 15 LEDs, but same position on both halves
// #define ERGODOX_LED_15_MIRROR // Addresses 15 LEDs, but are mirrored
// #define ERGODOX_LED_30 // Addresses all 30 LED individually
/* fix space cadet rollover issue */
#define DISABLE_SPACE_CADET_ROLLOVER
#define RGBW
/*
* The debounce filtering reports a key/switch change directly,
* without any extra delay. After that the debounce logic will filter
* all further changes, until the key/switch reports the same state for
* the given count of scans.
* So a perfect switch will get a short debounce period and
* a bad key will get a much longer debounce period.
* The result is an adaptive debouncing period for each switch.
*
* If you don't define it here, the matrix code will default to
* 5, which is now closer to 10ms, but still plenty according to
* manufacturer specs.
*/
// RGB backlight
#define DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_GND
#define DRIVER_ADDR_2 IS31FL3731_I2C_ADDRESS_VCC
#define IS31FL3731_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 24
#define DRIVER_2_LED_TOTAL 24
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
#define RGB_MATRIX_LED_PROCESS_LIMIT 5
#define RGB_MATRIX_LED_FLUSH_LIMIT 26
#define RGB_DISABLE_WHEN_USB_SUSPENDED
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_BREATHING
#define ENABLE_RGB_MATRIX_BAND_SAT
#define ENABLE_RGB_MATRIX_BAND_VAL
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
#define ENABLE_RGB_MATRIX_CYCLE_ALL
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
#define ENABLE_RGB_MATRIX_DUAL_BEACON
#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
#define ENABLE_RGB_MATRIX_RAINDROPS
#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
#define ENABLE_RGB_MATRIX_HUE_BREATHING
#define ENABLE_RGB_MATRIX_HUE_PENDULUM
#define ENABLE_RGB_MATRIX_HUE_WAVE
#define ENABLE_RGB_MATRIX_PIXEL_RAIN
#define ENABLE_RGB_MATRIX_PIXEL_FLOW
#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
// #define ENABLE_RGB_MATRIX_TYPING_HEATMAP
// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
// #define ENABLE_RGB_MATRIX_SPLASH
// #define ENABLE_RGB_MATRIX_MULTISPLASH
// #define ENABLE_RGB_MATRIX_SOLID_SPLASH
// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
// #define RGBLIGHT_COLOR_LAYER_0 0x00, 0x00, 0xFF
/* #define RGBLIGHT_COLOR_LAYER_1 0x00, 0x00, 0xFF */
/* #define RGBLIGHT_COLOR_LAYER_2 0xFF, 0x00, 0x00 */
/* #define RGBLIGHT_COLOR_LAYER_3 0x00, 0xFF, 0x00 */
/* #define RGBLIGHT_COLOR_LAYER_4 0xFF, 0xFF, 0x00 */
/* #define RGBLIGHT_COLOR_LAYER_5 0x00, 0xFF, 0xFF */
/* #define RGBLIGHT_COLOR_LAYER_6 0xFF, 0x00, 0xFF */
/* #define RGBLIGHT_COLOR_LAYER_7 0xFF, 0xFF, 0xFF */
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define DEBUG_MATRIX_SCAN_RATE