forked from forks/qmk_firmware
1269 lines
71 KiB
C++
1269 lines
71 KiB
C++
/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved.
|
|
|
|
This software may be distributed and modified under the terms of the GNU
|
|
General Public License version 2 (GPL2) as published by the Free Software
|
|
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
|
this file. Please note that GPL2 Section 2[b] requires that all works based
|
|
on this software must also be made publicly available under the terms of
|
|
the GPL2 ("Copyleft").
|
|
|
|
Contact information
|
|
-------------------
|
|
|
|
Kristian Lauszus, TKJ Electronics
|
|
Web : http://www.tkjelectronics.com
|
|
e-mail : kristianl@tkjelectronics.com
|
|
|
|
IR camera support added by Allan Glover (adglover9.81@gmail.com) and Kristian Lauszus
|
|
*/
|
|
|
|
#include "Wii.h"
|
|
// To enable serial debugging see "settings.h"
|
|
//#define EXTRADEBUG // Uncomment to get even more debugging data
|
|
//#define PRINTREPORT // Uncomment to print the report send by the Wii controllers
|
|
|
|
const uint8_t WII_LEDS[] PROGMEM = {
|
|
0x00, // OFF
|
|
0x10, // LED1
|
|
0x20, // LED2
|
|
0x40, // LED3
|
|
0x80, // LED4
|
|
|
|
0x90, // LED5
|
|
0xA0, // LED6
|
|
0xC0, // LED7
|
|
0xD0, // LED8
|
|
0xE0, // LED9
|
|
0xF0, // LED10
|
|
};
|
|
|
|
const uint32_t WII_BUTTONS[] PROGMEM = {
|
|
0x00008, // UP
|
|
0x00002, // RIGHT
|
|
0x00004, // DOWN
|
|
0x00001, // LEFT
|
|
|
|
0, // Skip
|
|
0x00010, // PLUS
|
|
0x00100, // TWO
|
|
0x00200, // ONE
|
|
|
|
0x01000, // MINUS
|
|
0x08000, // HOME
|
|
0x10000, // Z
|
|
0x20000, // C
|
|
|
|
0x00400, // B
|
|
0x00800, // A
|
|
};
|
|
const uint32_t WII_PROCONTROLLER_BUTTONS[] PROGMEM = {
|
|
0x00100, // UP
|
|
0x00080, // RIGHT
|
|
0x00040, // DOWN
|
|
0x00200, // LEFT
|
|
|
|
0, // Skip
|
|
0x00004, // PLUS
|
|
0x20000, // L3
|
|
0x10000, // R3
|
|
|
|
0x00010, // MINUS
|
|
0x00008, // HOME
|
|
0, 0, // Skip
|
|
|
|
0x04000, // B
|
|
0x01000, // A
|
|
0x00800, // X
|
|
0x02000, // Y
|
|
|
|
0x00020, // L
|
|
0x00002, // R
|
|
0x08000, // ZL
|
|
0x00400, // ZR
|
|
};
|
|
|
|
WII::WII(BTD *p, bool pair) :
|
|
BluetoothService(p) // Pointer to USB class instance - mandatory
|
|
{
|
|
pBtd->pairWithWii = pair;
|
|
|
|
HIDBuffer[0] = 0xA2; // HID BT DATA_request (0xA0) | Report Type (Output 0x02)
|
|
|
|
/* Set device cid for the control and intterrupt channelse - LSB */
|
|
control_dcid[0] = 0x60; // 0x0060
|
|
control_dcid[1] = 0x00;
|
|
interrupt_dcid[0] = 0x61; // 0x0061
|
|
interrupt_dcid[1] = 0x00;
|
|
|
|
Reset();
|
|
}
|
|
|
|
void WII::Reset() {
|
|
wiimoteConnected = false;
|
|
nunchuckConnected = false;
|
|
motionPlusConnected = false;
|
|
activateNunchuck = false;
|
|
motionValuesReset = false;
|
|
activeConnection = false;
|
|
motionPlusInside = false;
|
|
pBtd->wiiUProController = false;
|
|
wiiUProControllerConnected = false;
|
|
wiiBalanceBoardConnected = false;
|
|
l2cap_event_flag = 0; // Reset flags
|
|
l2cap_state = L2CAP_WAIT;
|
|
}
|
|
|
|
void WII::disconnect() { // Use this void to disconnect any of the controllers
|
|
if(!motionPlusInside) { // The old Wiimote needs a delay after the first command or it will automatically reconnect
|
|
if(motionPlusConnected) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nDeactivating Motion Plus"), 0x80);
|
|
#endif
|
|
initExtension1(); // This will disable the Motion Plus extension
|
|
}
|
|
timer = millis() + 1000; // We have to wait for the message before the rest of the channels can be deactivated
|
|
} else
|
|
timer = millis(); // Don't wait
|
|
// First the HID interrupt channel has to be disconnected, then the HID control channel and finally the HCI connection
|
|
pBtd->l2cap_disconnection_request(hci_handle, ++identifier, interrupt_scid, interrupt_dcid);
|
|
Reset();
|
|
l2cap_state = L2CAP_INTERRUPT_DISCONNECT;
|
|
}
|
|
|
|
void WII::ACLData(uint8_t* l2capinbuf) {
|
|
if(!pBtd->l2capConnectionClaimed && pBtd->incomingWii && !wiimoteConnected && !activeConnection) {
|
|
if(l2capinbuf[8] == L2CAP_CMD_CONNECTION_REQUEST) {
|
|
if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == HID_CTRL_PSM) {
|
|
motionPlusInside = pBtd->motionPlusInside;
|
|
pBtd->incomingWii = false;
|
|
pBtd->l2capConnectionClaimed = true; // Claim that the incoming connection belongs to this service
|
|
activeConnection = true;
|
|
hci_handle = pBtd->hci_handle; // Store the HCI Handle for the connection
|
|
l2cap_state = L2CAP_WAIT;
|
|
}
|
|
}
|
|
}
|
|
|
|
if(checkHciHandle(l2capinbuf, hci_handle)) { // acl_handle_ok
|
|
if((l2capinbuf[6] | (l2capinbuf[7] << 8)) == 0x0001U) { // l2cap_control - Channel ID for ACL-U
|
|
if(l2capinbuf[8] == L2CAP_CMD_COMMAND_REJECT) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nL2CAP Command Rejected - Reason: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[13], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[12], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[17], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[16], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[15], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[14], 0x80);
|
|
#endif
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_CONNECTION_RESPONSE) {
|
|
if(((l2capinbuf[16] | (l2capinbuf[17] << 8)) == 0x0000) && ((l2capinbuf[18] | (l2capinbuf[19] << 8)) == SUCCESSFUL)) { // Success
|
|
if(l2capinbuf[14] == control_dcid[0] && l2capinbuf[15] == control_dcid[1]) {
|
|
//Notify(PSTR("\r\nHID Control Connection Complete"), 0x80);
|
|
identifier = l2capinbuf[9];
|
|
control_scid[0] = l2capinbuf[12];
|
|
control_scid[1] = l2capinbuf[13];
|
|
l2cap_set_flag(L2CAP_FLAG_CONTROL_CONNECTED);
|
|
} else if(l2capinbuf[14] == interrupt_dcid[0] && l2capinbuf[15] == interrupt_dcid[1]) {
|
|
//Notify(PSTR("\r\nHID Interrupt Connection Complete"), 0x80);
|
|
identifier = l2capinbuf[9];
|
|
interrupt_scid[0] = l2capinbuf[12];
|
|
interrupt_scid[1] = l2capinbuf[13];
|
|
l2cap_set_flag(L2CAP_FLAG_INTERRUPT_CONNECTED);
|
|
}
|
|
}
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_CONNECTION_REQUEST) {
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR("\r\nL2CAP Connection Request - PSM: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[13], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[12], 0x80);
|
|
Notify(PSTR(" SCID: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[15], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[14], 0x80);
|
|
Notify(PSTR(" Identifier: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[9], 0x80);
|
|
#endif
|
|
if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == HID_CTRL_PSM) {
|
|
identifier = l2capinbuf[9];
|
|
control_scid[0] = l2capinbuf[14];
|
|
control_scid[1] = l2capinbuf[15];
|
|
l2cap_set_flag(L2CAP_FLAG_CONNECTION_CONTROL_REQUEST);
|
|
} else if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == HID_INTR_PSM) {
|
|
identifier = l2capinbuf[9];
|
|
interrupt_scid[0] = l2capinbuf[14];
|
|
interrupt_scid[1] = l2capinbuf[15];
|
|
l2cap_set_flag(L2CAP_FLAG_CONNECTION_INTERRUPT_REQUEST);
|
|
}
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_CONFIG_RESPONSE) {
|
|
if((l2capinbuf[16] | (l2capinbuf[17] << 8)) == 0x0000) { // Success
|
|
if(l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) {
|
|
//Notify(PSTR("\r\nHID Control Configuration Complete"), 0x80);
|
|
identifier = l2capinbuf[9];
|
|
l2cap_set_flag(L2CAP_FLAG_CONFIG_CONTROL_SUCCESS);
|
|
} else if(l2capinbuf[12] == interrupt_dcid[0] && l2capinbuf[13] == interrupt_dcid[1]) {
|
|
//Notify(PSTR("\r\nHID Interrupt Configuration Complete"), 0x80);
|
|
identifier = l2capinbuf[9];
|
|
l2cap_set_flag(L2CAP_FLAG_CONFIG_INTERRUPT_SUCCESS);
|
|
}
|
|
}
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_CONFIG_REQUEST) {
|
|
if(l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) {
|
|
//Notify(PSTR("\r\nHID Control Configuration Request"), 0x80);
|
|
pBtd->l2cap_config_response(hci_handle, l2capinbuf[9], control_scid);
|
|
} else if(l2capinbuf[12] == interrupt_dcid[0] && l2capinbuf[13] == interrupt_dcid[1]) {
|
|
//Notify(PSTR("\r\nHID Interrupt Configuration Request"), 0x80);
|
|
pBtd->l2cap_config_response(hci_handle, l2capinbuf[9], interrupt_scid);
|
|
}
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_DISCONNECT_REQUEST) {
|
|
if(l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nDisconnect Request: Control Channel"), 0x80);
|
|
#endif
|
|
identifier = l2capinbuf[9];
|
|
pBtd->l2cap_disconnection_response(hci_handle, identifier, control_dcid, control_scid);
|
|
Reset();
|
|
} else if(l2capinbuf[12] == interrupt_dcid[0] && l2capinbuf[13] == interrupt_dcid[1]) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nDisconnect Request: Interrupt Channel"), 0x80);
|
|
#endif
|
|
identifier = l2capinbuf[9];
|
|
pBtd->l2cap_disconnection_response(hci_handle, identifier, interrupt_dcid, interrupt_scid);
|
|
Reset();
|
|
}
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_DISCONNECT_RESPONSE) {
|
|
if(l2capinbuf[12] == control_scid[0] && l2capinbuf[13] == control_scid[1]) {
|
|
//Notify(PSTR("\r\nDisconnect Response: Control Channel"), 0x80);
|
|
identifier = l2capinbuf[9];
|
|
l2cap_set_flag(L2CAP_FLAG_DISCONNECT_CONTROL_RESPONSE);
|
|
} else if(l2capinbuf[12] == interrupt_scid[0] && l2capinbuf[13] == interrupt_scid[1]) {
|
|
//Notify(PSTR("\r\nDisconnect Response: Interrupt Channel"), 0x80);
|
|
identifier = l2capinbuf[9];
|
|
l2cap_set_flag(L2CAP_FLAG_DISCONNECT_INTERRUPT_RESPONSE);
|
|
}
|
|
}
|
|
#ifdef EXTRADEBUG
|
|
else {
|
|
identifier = l2capinbuf[9];
|
|
Notify(PSTR("\r\nL2CAP Unknown Signaling Command: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[8], 0x80);
|
|
}
|
|
#endif
|
|
} else if(l2capinbuf[6] == interrupt_dcid[0] && l2capinbuf[7] == interrupt_dcid[1]) { // l2cap_interrupt
|
|
//Notify(PSTR("\r\nL2CAP Interrupt"), 0x80);
|
|
if(l2capinbuf[8] == 0xA1) { // HID_THDR_DATA_INPUT
|
|
if((l2capinbuf[9] >= 0x20 && l2capinbuf[9] <= 0x22) || (l2capinbuf[9] >= 0x30 && l2capinbuf[9] <= 0x37) || l2capinbuf[9] == 0x3e || l2capinbuf[9] == 0x3f) { // These reports include the buttons
|
|
if((l2capinbuf[9] >= 0x20 && l2capinbuf[9] <= 0x22) || l2capinbuf[9] == 0x31 || l2capinbuf[9] == 0x33) // These reports have no extensions bytes
|
|
ButtonState = (uint32_t)((l2capinbuf[10] & 0x1F) | ((uint16_t)(l2capinbuf[11] & 0x9F) << 8));
|
|
else if(wiiUProControllerConnected)
|
|
ButtonState = (uint32_t)(((~l2capinbuf[23]) & 0xFE) | ((uint16_t)(~l2capinbuf[24]) << 8) | ((uint32_t)((~l2capinbuf[25]) & 0x03) << 16));
|
|
else if(motionPlusConnected) {
|
|
if(l2capinbuf[20] & 0x02) // Only update the Wiimote buttons, since the extension bytes are from the Motion Plus
|
|
ButtonState = (uint32_t)((l2capinbuf[10] & 0x1F) | ((uint16_t)(l2capinbuf[11] & 0x9F) << 8) | ((uint32_t)(ButtonState & 0xFFFF0000)));
|
|
else if(nunchuckConnected) // Update if it's a report from the Nunchuck
|
|
ButtonState = (uint32_t)((l2capinbuf[10] & 0x1F) | ((uint16_t)(l2capinbuf[11] & 0x9F) << 8) | ((uint32_t)((~l2capinbuf[20]) & 0x0C) << 14));
|
|
//else if(classicControllerConnected) // Update if it's a report from the Classic Controller
|
|
} else if(nunchuckConnected) // The Nunchuck is directly connected
|
|
ButtonState = (uint32_t)((l2capinbuf[10] & 0x1F) | ((uint16_t)(l2capinbuf[11] & 0x9F) << 8) | ((uint32_t)((~l2capinbuf[20]) & 0x03) << 16));
|
|
//else if(classicControllerConnected) // The Classic Controller is directly connected
|
|
else if(!unknownExtensionConnected)
|
|
ButtonState = (uint32_t)((l2capinbuf[10] & 0x1F) | ((uint16_t)(l2capinbuf[11] & 0x9F) << 8));
|
|
#ifdef PRINTREPORT
|
|
Notify(PSTR("ButtonState: "), 0x80);
|
|
D_PrintHex<uint32_t > (ButtonState, 0x80);
|
|
Notify(PSTR("\r\n"), 0x80);
|
|
#endif
|
|
if(ButtonState != OldButtonState) {
|
|
ButtonClickState = ButtonState & ~OldButtonState; // Update click state variable
|
|
OldButtonState = ButtonState;
|
|
}
|
|
}
|
|
if(l2capinbuf[9] == 0x31 || l2capinbuf[9] == 0x33 || l2capinbuf[9] == 0x35 || l2capinbuf[9] == 0x37) { // Read the accelerometer
|
|
accXwiimote = ((l2capinbuf[12] << 2) | (l2capinbuf[10] & 0x60 >> 5)) - 500;
|
|
accYwiimote = ((l2capinbuf[13] << 2) | (l2capinbuf[11] & 0x20 >> 4)) - 500;
|
|
accZwiimote = ((l2capinbuf[14] << 2) | (l2capinbuf[11] & 0x40 >> 5)) - 500;
|
|
}
|
|
switch(l2capinbuf[9]) {
|
|
case 0x20: // Status Information - (a1) 20 BB BB LF 00 00 VV
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR("\r\nStatus report was received"), 0x80);
|
|
#endif
|
|
wiiState = l2capinbuf[12]; // (0x01: Battery is nearly empty), (0x02: An Extension Controller is connected), (0x04: Speaker enabled), (0x08: IR enabled), (0x10: LED1, 0x20: LED2, 0x40: LED3, 0x80: LED4)
|
|
batteryLevel = l2capinbuf[15]; // Update battery level
|
|
|
|
if(!checkBatteryLevel) { // If this is true it means that the user must have called getBatteryLevel()
|
|
if(l2capinbuf[12] & 0x02) { // Check if a extension is connected
|
|
#ifdef DEBUG_USB_HOST
|
|
if(!unknownExtensionConnected)
|
|
Notify(PSTR("\r\nExtension connected"), 0x80);
|
|
#endif
|
|
unknownExtensionConnected = true;
|
|
#ifdef WIICAMERA
|
|
if(!isIRCameraEnabled()) // Don't activate the Motion Plus if we are trying to initialize the IR camera
|
|
#endif
|
|
setReportMode(false, 0x35); // Also read the extension
|
|
} else {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nExtension disconnected"), 0x80);
|
|
#endif
|
|
if(motionPlusConnected) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR(" - from Motion Plus"), 0x80);
|
|
#endif
|
|
wii_clear_flag(WII_FLAG_NUNCHUCK_CONNECTED);
|
|
if(!activateNunchuck) // If it's already trying to initialize the Nunchuck don't set it to false
|
|
nunchuckConnected = false;
|
|
//else if(classicControllerConnected)
|
|
} else if(nunchuckConnected) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR(" - Nunchuck"), 0x80);
|
|
#endif
|
|
nunchuckConnected = false; // It must be the Nunchuck controller then
|
|
wii_clear_flag(WII_FLAG_NUNCHUCK_CONNECTED);
|
|
onInit();
|
|
setReportMode(false, 0x31); // If there is no extension connected we will read the buttons and accelerometer
|
|
} else
|
|
setReportMode(false, 0x31); // If there is no extension connected we will read the buttons and accelerometer
|
|
}
|
|
}
|
|
else {
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR("\r\nChecking battery level"), 0x80);
|
|
#endif
|
|
checkBatteryLevel = false; // Check for extensions by default
|
|
}
|
|
#ifdef DEBUG_USB_HOST
|
|
if(l2capinbuf[12] & 0x01)
|
|
Notify(PSTR("\r\nWARNING: Battery is nearly empty"), 0x80);
|
|
#endif
|
|
|
|
break;
|
|
case 0x21: // Read Memory Data
|
|
if((l2capinbuf[12] & 0x0F) == 0) { // No error
|
|
uint8_t reportLength = (l2capinbuf[12] >> 4) + 1; // // Bit 4-7 is the length - 1
|
|
// See: http://wiibrew.org/wiki/Wiimote/Extension_Controllers
|
|
if(l2capinbuf[16] == 0x00 && l2capinbuf[17] == 0xA4 && l2capinbuf[18] == 0x20 && l2capinbuf[19] == 0x00 && l2capinbuf[20] == 0x00) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nNunchuck connected"), 0x80);
|
|
#endif
|
|
wii_set_flag(WII_FLAG_NUNCHUCK_CONNECTED);
|
|
} else if(l2capinbuf[16] == 0x00 && (l2capinbuf[17] == 0xA6 || l2capinbuf[17] == 0xA4) && l2capinbuf[18] == 0x20 && l2capinbuf[19] == 0x00 && l2capinbuf[20] == 0x05) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nMotion Plus connected"), 0x80);
|
|
#endif
|
|
wii_set_flag(WII_FLAG_MOTION_PLUS_CONNECTED);
|
|
} else if(l2capinbuf[16] == 0x00 && l2capinbuf[17] == 0xA4 && l2capinbuf[18] == 0x20 && l2capinbuf[19] == 0x04 && l2capinbuf[20] == 0x05) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nMotion Plus activated in normal mode"), 0x80);
|
|
#endif
|
|
motionPlusConnected = true;
|
|
#ifdef WIICAMERA
|
|
if(!isIRCameraEnabled()) // Don't activate the Motion Plus if we are trying to initialize the IR camera
|
|
#endif
|
|
setReportMode(false, 0x35); // Also read the extension
|
|
} else if(l2capinbuf[16] == 0x00 && l2capinbuf[17] == 0xA4 && l2capinbuf[18] == 0x20 && l2capinbuf[19] == 0x05 && l2capinbuf[20] == 0x05) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nMotion Plus activated in Nunchuck pass-through mode"), 0x80);
|
|
#endif
|
|
activateNunchuck = false;
|
|
motionPlusConnected = true;
|
|
nunchuckConnected = true;
|
|
#ifdef WIICAMERA
|
|
if(!isIRCameraEnabled()) // Don't activate the Motion Plus if we are trying to initialize the IR camera
|
|
#endif
|
|
setReportMode(false, 0x35); // Also read the extension
|
|
} else if(l2capinbuf[16] == 0x00 && l2capinbuf[17] == 0xA6 && l2capinbuf[18] == 0x20 && (l2capinbuf[19] == 0x00 || l2capinbuf[19] == 0x04 || l2capinbuf[19] == 0x05 || l2capinbuf[19] == 0x07) && l2capinbuf[20] == 0x05) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nInactive Wii Motion Plus"), 0x80);
|
|
Notify(PSTR("\r\nPlease unplug the Motion Plus, disconnect the Wiimote and then replug the Motion Plus Extension"), 0x80);
|
|
#endif
|
|
stateCounter = 300; // Skip the rest in "WII_CHECK_MOTION_PLUS_STATE"
|
|
} else if(l2capinbuf[16] == 0x00 && l2capinbuf[17] == 0xA4 && l2capinbuf[18] == 0x20 && l2capinbuf[19] == 0x01 && l2capinbuf[20] == 0x20) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nWii U Pro Controller connected"), 0x80);
|
|
#endif
|
|
wiiUProControllerConnected = true;
|
|
} else if(l2capinbuf[16] == 0x00 && l2capinbuf[17] == 0xA4 && l2capinbuf[18] == 0x20 && l2capinbuf[19] == 0x04 && l2capinbuf[20] == 0x02) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nWii Balance Board connected"), 0x80);
|
|
#endif
|
|
setReportMode(false, 0x32); // Read the Wii Balance Board extension
|
|
wii_set_flag(WII_FLAG_CALIBRATE_BALANCE_BOARD);
|
|
}
|
|
// Wii Balance Board calibration reports (24 bits in total)
|
|
else if(l2capinbuf[13] == 0x00 && l2capinbuf[14] == 0x24 && reportLength == 16) { // First 16-bit
|
|
for(uint8_t i = 0; i < 2; i++) {
|
|
for(uint8_t j = 0; j < 4; j++)
|
|
wiiBalanceBoardCal[i][j] = l2capinbuf[16 + 8 * i + 2 * j] | l2capinbuf[15 + 8 * i + 2 * j] << 8;
|
|
}
|
|
} else if(l2capinbuf[13] == 0x00 && l2capinbuf[14] == 0x34 && reportLength == 8) { // Last 8-bit
|
|
for(uint8_t j = 0; j < 4; j++)
|
|
wiiBalanceBoardCal[2][j] = l2capinbuf[16 + 2 * j] | l2capinbuf[15 + 2 * j] << 8;
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nWii Balance Board calibration values read successfully"), 0x80);
|
|
#endif
|
|
wii_clear_flag(WII_FLAG_CALIBRATE_BALANCE_BOARD);
|
|
wiiBalanceBoardConnected = true;
|
|
}
|
|
#ifdef DEBUG_USB_HOST
|
|
else {
|
|
Notify(PSTR("\r\nUnknown Device: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[13], 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[14], 0x80);
|
|
Notify(PSTR("\r\nData: "), 0x80);
|
|
for(uint8_t i = 0; i < reportLength; i++) {
|
|
D_PrintHex<uint8_t > (l2capinbuf[15 + i], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
#ifdef EXTRADEBUG
|
|
else {
|
|
Notify(PSTR("\r\nReport Error: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[13], 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[14], 0x80);
|
|
}
|
|
#endif
|
|
break;
|
|
case 0x22: // Acknowledge output report, return function result
|
|
#ifdef DEBUG_USB_HOST
|
|
if(l2capinbuf[13] != 0x00) { // Check if there is an error
|
|
Notify(PSTR("\r\nCommand failed: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[12], 0x80);
|
|
}
|
|
#endif
|
|
break;
|
|
case 0x30: // Core buttons - (a1) 30 BB BB
|
|
break;
|
|
case 0x31: // Core Buttons and Accelerometer - (a1) 31 BB BB AA AA AA
|
|
break;
|
|
case 0x32: // Core Buttons with 8 Extension bytes - (a1) 32 BB BB EE EE EE EE EE EE EE EE
|
|
// See: http://wiibrew.org/wiki/Wii_Balance_Board#Data_Format
|
|
wiiBalanceBoardRaw[TopRight] = l2capinbuf[13] | l2capinbuf[12] << 8; // Top right
|
|
wiiBalanceBoardRaw[BotRight] = l2capinbuf[15] | l2capinbuf[14] << 8; // Bottom right
|
|
wiiBalanceBoardRaw[TopLeft] = l2capinbuf[17] | l2capinbuf[16] << 8; // Top left
|
|
wiiBalanceBoardRaw[BotLeft] = l2capinbuf[19] | l2capinbuf[18] << 8; // Bottom left
|
|
break;
|
|
case 0x33: // Core Buttons with Accelerometer and 12 IR bytes - (a1) 33 BB BB AA AA AA II II II II II II II II II II II II
|
|
#ifdef WIICAMERA
|
|
// Read the IR data
|
|
IR_object_x1 = (l2capinbuf[15] | ((uint16_t)(l2capinbuf[17] & 0x30) << 4)); // x position
|
|
IR_object_y1 = (l2capinbuf[16] | ((uint16_t)(l2capinbuf[17] & 0xC0) << 2)); // y position
|
|
IR_object_s1 = (l2capinbuf[17] & 0x0F); // Size value, 0-15
|
|
|
|
IR_object_x2 = (l2capinbuf[18] | ((uint16_t)(l2capinbuf[20] & 0x30) << 4));
|
|
IR_object_y2 = (l2capinbuf[19] | ((uint16_t)(l2capinbuf[20] & 0xC0) << 2));
|
|
IR_object_s2 = (l2capinbuf[20] & 0x0F);
|
|
|
|
IR_object_x3 = (l2capinbuf[21] | ((uint16_t)(l2capinbuf[23] & 0x30) << 4));
|
|
IR_object_y3 = (l2capinbuf[22] | ((uint16_t)(l2capinbuf[23] & 0xC0) << 2));
|
|
IR_object_s3 = (l2capinbuf[23] & 0x0F);
|
|
|
|
IR_object_x4 = (l2capinbuf[24] | ((uint16_t)(l2capinbuf[26] & 0x30) << 4));
|
|
IR_object_y4 = (l2capinbuf[25] | ((uint16_t)(l2capinbuf[26] & 0xC0) << 2));
|
|
IR_object_s4 = (l2capinbuf[26] & 0x0F);
|
|
#endif
|
|
break;
|
|
case 0x34: // Core Buttons with 19 Extension bytes - (a1) 34 BB BB EE EE EE EE EE EE EE EE EE EE EE EE EE EE EE EE EE EE EE
|
|
break;
|
|
/* 0x3e and 0x3f both give unknown report types when report mode is 0x3e or 0x3f with mode number 0x05 */
|
|
case 0x3E: // Core Buttons with Accelerometer and 32 IR bytes
|
|
// (a1) 31 BB BB AA AA AA II II II II II II II II II II II II II II II II II II II II II II II II II II II II II II II II
|
|
// corresponds to output report mode 0x3e
|
|
|
|
/**** for reading in full mode: DOES NOT WORK YET ****/
|
|
/* When it works it will also have intensity and bounding box data */
|
|
/*
|
|
IR_object_x1 = (l2capinbuf[13] | ((uint16_t)(l2capinbuf[15] & 0x30) << 4));
|
|
IR_object_y1 = (l2capinbuf[14] | ((uint16_t)(l2capinbuf[15] & 0xC0) << 2));
|
|
IR_object_s1 = (l2capinbuf[15] & 0x0F);
|
|
*/
|
|
break;
|
|
case 0x3F:
|
|
/*
|
|
IR_object_x1 = (l2capinbuf[13] | ((uint16_t)(l2capinbuf[15] & 0x30) << 4));
|
|
IR_object_y1 = (l2capinbuf[14] | ((uint16_t)(l2capinbuf[15] & 0xC0) << 2));
|
|
IR_object_s1 = (l2capinbuf[15] & 0x0F);
|
|
*/
|
|
break;
|
|
case 0x35: // Core Buttons and Accelerometer with 16 Extension Bytes
|
|
// (a1) 35 BB BB AA AA AA EE EE EE EE EE EE EE EE EE EE EE EE EE EE EE EE
|
|
#if 1 // Set this to 0 if you don't want to use an extension, this reduceds the size of the library a lot!
|
|
if(motionPlusConnected) {
|
|
if(l2capinbuf[20] & 0x02) { // Check if it's a report from the Motion controller or the extension
|
|
if(motionValuesReset) { // We will only use the values when the gyro value has been set
|
|
gyroYawRaw = ((l2capinbuf[15] | ((l2capinbuf[18] & 0xFC) << 6)) - gyroYawZero);
|
|
gyroRollRaw = ((l2capinbuf[16] | ((l2capinbuf[19] & 0xFC) << 6)) - gyroRollZero);
|
|
gyroPitchRaw = ((l2capinbuf[17] | ((l2capinbuf[20] & 0xFC) << 6)) - gyroPitchZero);
|
|
|
|
yawGyroSpeed = (double)gyroYawRaw / ((double)gyroYawZero / yawGyroScale);
|
|
rollGyroSpeed = -(double)gyroRollRaw / ((double)gyroRollZero / rollGyroScale); // We invert these values so they will fit the acc values
|
|
pitchGyroSpeed = (double)gyroPitchRaw / ((double)gyroPitchZero / pitchGyroScale);
|
|
|
|
/* The onboard gyro has two ranges for slow and fast mode */
|
|
if(!(l2capinbuf[18] & 0x02)) // Check if fast mode is used
|
|
yawGyroSpeed *= 4.545;
|
|
if(!(l2capinbuf[18] & 0x01)) // Check if fast mode is used
|
|
pitchGyroSpeed *= 4.545;
|
|
if(!(l2capinbuf[19] & 0x02)) // Check if fast mode is used
|
|
rollGyroSpeed *= 4.545;
|
|
|
|
compPitch = (0.93 * (compPitch + (pitchGyroSpeed * (double)(micros() - timer) / 1000000)))+(0.07 * getWiimotePitch()); // Use a complimentary filter to calculate the angle
|
|
compRoll = (0.93 * (compRoll + (rollGyroSpeed * (double)(micros() - timer) / 1000000)))+(0.07 * getWiimoteRoll());
|
|
|
|
gyroYaw += (yawGyroSpeed * ((double)(micros() - timer) / 1000000));
|
|
gyroRoll += (rollGyroSpeed * ((double)(micros() - timer) / 1000000));
|
|
gyroPitch += (pitchGyroSpeed * ((double)(micros() - timer) / 1000000));
|
|
timer = micros();
|
|
/*
|
|
// Uncomment these lines to tune the gyro scale variabels
|
|
Notify(PSTR("\r\ngyroYaw: "), 0x80);
|
|
Notify(gyroYaw, 0x80);
|
|
Notify(PSTR("\tgyroRoll: "), 0x80);
|
|
Notify(gyroRoll, 0x80);
|
|
Notify(PSTR("\tgyroPitch: "), 0x80);
|
|
Notify(gyroPitch, 0x80);
|
|
*/
|
|
/*
|
|
Notify(PSTR("\twiimoteRoll: "), 0x80);
|
|
Notify(wiimoteRoll, 0x80);
|
|
Notify(PSTR("\twiimotePitch: "), 0x80);
|
|
Notify(wiimotePitch, 0x80);
|
|
*/
|
|
} else {
|
|
if((micros() - timer) > 1000000) { // Loop for 1 sec before resetting the values
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nThe gyro values has been reset"), 0x80);
|
|
#endif
|
|
gyroYawZero = (l2capinbuf[15] | ((l2capinbuf[18] & 0xFC) << 6));
|
|
gyroRollZero = (l2capinbuf[16] | ((l2capinbuf[19] & 0xFC) << 6));
|
|
gyroPitchZero = (l2capinbuf[17] | ((l2capinbuf[20] & 0xFC) << 6));
|
|
|
|
rollGyroScale = 500; // You might need to adjust these
|
|
pitchGyroScale = 400;
|
|
yawGyroScale = 415;
|
|
|
|
gyroYaw = 0;
|
|
gyroRoll = 0;
|
|
gyroPitch = 0;
|
|
|
|
motionValuesReset = true;
|
|
timer = micros();
|
|
}
|
|
}
|
|
} else {
|
|
if(nunchuckConnected) {
|
|
hatValues[HatX] = l2capinbuf[15];
|
|
hatValues[HatY] = l2capinbuf[16];
|
|
accXnunchuck = ((l2capinbuf[17] << 2) | (l2capinbuf[20] & 0x10 >> 3)) - 416;
|
|
accYnunchuck = ((l2capinbuf[18] << 2) | (l2capinbuf[20] & 0x20 >> 4)) - 416;
|
|
accZnunchuck = (((l2capinbuf[19] & 0xFE) << 2) | (l2capinbuf[20] & 0xC0 >> 5)) - 416;
|
|
}
|
|
//else if(classicControllerConnected) { }
|
|
}
|
|
if(l2capinbuf[19] & 0x01) {
|
|
if(!extensionConnected) {
|
|
extensionConnected = true;
|
|
unknownExtensionConnected = true;
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nExtension connected to Motion Plus"), 0x80);
|
|
#endif
|
|
}
|
|
} else {
|
|
if(extensionConnected && !unknownExtensionConnected) {
|
|
extensionConnected = false;
|
|
unknownExtensionConnected = true;
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nExtension disconnected from Motion Plus"), 0x80);
|
|
#endif
|
|
nunchuckConnected = false; // There is no extension connected to the Motion Plus if this report is sent
|
|
}
|
|
}
|
|
|
|
} else if(nunchuckConnected) {
|
|
hatValues[HatX] = l2capinbuf[15];
|
|
hatValues[HatY] = l2capinbuf[16];
|
|
accXnunchuck = ((l2capinbuf[17] << 2) | (l2capinbuf[20] & 0x0C >> 2)) - 416;
|
|
accYnunchuck = ((l2capinbuf[18] << 2) | (l2capinbuf[20] & 0x30 >> 4)) - 416;
|
|
accZnunchuck = ((l2capinbuf[19] << 2) | (l2capinbuf[20] & 0xC0 >> 6)) - 416;
|
|
} else if(wiiUProControllerConnected) {
|
|
hatValues[LeftHatX] = (l2capinbuf[15] | l2capinbuf[16] << 8);
|
|
hatValues[RightHatX] = (l2capinbuf[17] | l2capinbuf[18] << 8);
|
|
hatValues[LeftHatY] = (l2capinbuf[19] | l2capinbuf[20] << 8);
|
|
hatValues[RightHatY] = (l2capinbuf[21] | l2capinbuf[22] << 8);
|
|
}
|
|
#endif
|
|
break;
|
|
#ifdef DEBUG_USB_HOST
|
|
default:
|
|
Notify(PSTR("\r\nUnknown Report type: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[9], 0x80);
|
|
break;
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
L2CAP_task();
|
|
}
|
|
}
|
|
|
|
void WII::L2CAP_task() {
|
|
switch(l2cap_state) {
|
|
/* These states are used if the Wiimote is the host */
|
|
case L2CAP_CONTROL_SUCCESS:
|
|
if(l2cap_check_flag(L2CAP_FLAG_CONFIG_CONTROL_SUCCESS)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nHID Control Successfully Configured"), 0x80);
|
|
#endif
|
|
l2cap_state = L2CAP_INTERRUPT_SETUP;
|
|
}
|
|
break;
|
|
|
|
case L2CAP_INTERRUPT_SETUP:
|
|
if(l2cap_check_flag(L2CAP_FLAG_CONNECTION_INTERRUPT_REQUEST)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nHID Interrupt Incoming Connection Request"), 0x80);
|
|
#endif
|
|
pBtd->l2cap_connection_response(hci_handle, identifier, interrupt_dcid, interrupt_scid, PENDING);
|
|
delay(1);
|
|
pBtd->l2cap_connection_response(hci_handle, identifier, interrupt_dcid, interrupt_scid, SUCCESSFUL);
|
|
identifier++;
|
|
delay(1);
|
|
pBtd->l2cap_config_request(hci_handle, identifier, interrupt_scid);
|
|
|
|
l2cap_state = L2CAP_INTERRUPT_CONFIG_REQUEST;
|
|
}
|
|
break;
|
|
|
|
/* These states are used if the Arduino is the host */
|
|
case L2CAP_CONTROL_CONNECT_REQUEST:
|
|
if(l2cap_check_flag(L2CAP_FLAG_CONTROL_CONNECTED)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSend HID Control Config Request"), 0x80);
|
|
#endif
|
|
identifier++;
|
|
pBtd->l2cap_config_request(hci_handle, identifier, control_scid);
|
|
l2cap_state = L2CAP_CONTROL_CONFIG_REQUEST;
|
|
}
|
|
break;
|
|
|
|
case L2CAP_CONTROL_CONFIG_REQUEST:
|
|
if(l2cap_check_flag(L2CAP_FLAG_CONFIG_CONTROL_SUCCESS)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSend HID Interrupt Connection Request"), 0x80);
|
|
#endif
|
|
identifier++;
|
|
pBtd->l2cap_connection_request(hci_handle, identifier, interrupt_dcid, HID_INTR_PSM);
|
|
l2cap_state = L2CAP_INTERRUPT_CONNECT_REQUEST;
|
|
}
|
|
break;
|
|
|
|
case L2CAP_INTERRUPT_CONNECT_REQUEST:
|
|
if(l2cap_check_flag(L2CAP_FLAG_INTERRUPT_CONNECTED)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSend HID Interrupt Config Request"), 0x80);
|
|
#endif
|
|
identifier++;
|
|
pBtd->l2cap_config_request(hci_handle, identifier, interrupt_scid);
|
|
l2cap_state = L2CAP_INTERRUPT_CONFIG_REQUEST;
|
|
}
|
|
break;
|
|
|
|
case L2CAP_INTERRUPT_CONFIG_REQUEST:
|
|
if(l2cap_check_flag(L2CAP_FLAG_CONFIG_INTERRUPT_SUCCESS)) { // Now the HID channels is established
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nHID Channels Established"), 0x80);
|
|
#endif
|
|
pBtd->connectToWii = false;
|
|
pBtd->pairWithWii = false;
|
|
stateCounter = 0;
|
|
l2cap_state = WII_CHECK_MOTION_PLUS_STATE;
|
|
}
|
|
break;
|
|
|
|
/* The next states are in run() */
|
|
|
|
case L2CAP_INTERRUPT_DISCONNECT:
|
|
if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_INTERRUPT_RESPONSE) && ((long)(millis() - timer) >= 0L)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nDisconnected Interrupt Channel"), 0x80);
|
|
#endif
|
|
identifier++;
|
|
pBtd->l2cap_disconnection_request(hci_handle, identifier, control_scid, control_dcid);
|
|
l2cap_state = L2CAP_CONTROL_DISCONNECT;
|
|
}
|
|
break;
|
|
|
|
case L2CAP_CONTROL_DISCONNECT:
|
|
if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_CONTROL_RESPONSE)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nDisconnected Control Channel"), 0x80);
|
|
#endif
|
|
pBtd->hci_disconnect(hci_handle);
|
|
hci_handle = -1; // Reset handle
|
|
l2cap_event_flag = 0; // Reset flags
|
|
l2cap_state = L2CAP_WAIT;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
void WII::Run() {
|
|
if(l2cap_state == L2CAP_INTERRUPT_DISCONNECT && ((long)(millis() - timer) >= 0L))
|
|
L2CAP_task(); // Call the rest of the disconnection routine after we have waited long enough
|
|
|
|
switch(l2cap_state) {
|
|
case L2CAP_WAIT:
|
|
if(pBtd->connectToWii && !pBtd->l2capConnectionClaimed && !wiimoteConnected && !activeConnection) {
|
|
pBtd->l2capConnectionClaimed = true;
|
|
activeConnection = true;
|
|
motionPlusInside = pBtd->motionPlusInside;
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSend HID Control Connection Request"), 0x80);
|
|
#endif
|
|
hci_handle = pBtd->hci_handle; // Store the HCI Handle for the connection
|
|
l2cap_event_flag = 0; // Reset flags
|
|
identifier = 0;
|
|
pBtd->l2cap_connection_request(hci_handle, identifier, control_dcid, HID_CTRL_PSM);
|
|
l2cap_state = L2CAP_CONTROL_CONNECT_REQUEST;
|
|
} else if(l2cap_check_flag(L2CAP_FLAG_CONNECTION_CONTROL_REQUEST)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nHID Control Incoming Connection Request"), 0x80);
|
|
#endif
|
|
pBtd->l2cap_connection_response(hci_handle, identifier, control_dcid, control_scid, PENDING);
|
|
delay(1);
|
|
pBtd->l2cap_connection_response(hci_handle, identifier, control_dcid, control_scid, SUCCESSFUL);
|
|
identifier++;
|
|
delay(1);
|
|
pBtd->l2cap_config_request(hci_handle, identifier, control_scid);
|
|
l2cap_state = L2CAP_CONTROL_SUCCESS;
|
|
}
|
|
break;
|
|
|
|
case WII_CHECK_MOTION_PLUS_STATE:
|
|
#ifdef DEBUG_USB_HOST
|
|
if(stateCounter == 0) // Only print onnce
|
|
Notify(PSTR("\r\nChecking if a Motion Plus is connected"), 0x80);
|
|
#endif
|
|
stateCounter++;
|
|
if(stateCounter % 200 == 0)
|
|
checkMotionPresent(); // Check if there is a motion plus connected
|
|
if(wii_check_flag(WII_FLAG_MOTION_PLUS_CONNECTED)) {
|
|
stateCounter = 0;
|
|
l2cap_state = WII_INIT_MOTION_PLUS_STATE;
|
|
timer = micros();
|
|
|
|
if(unknownExtensionConnected) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nA extension is also connected"), 0x80);
|
|
#endif
|
|
activateNunchuck = true; // For we will just set this to true as this the only extension supported so far
|
|
}
|
|
|
|
} else if(stateCounter == 601) { // We will try three times to check for the motion plus
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nNo Motion Plus was detected"), 0x80);
|
|
#endif
|
|
stateCounter = 0;
|
|
l2cap_state = WII_CHECK_EXTENSION_STATE;
|
|
}
|
|
break;
|
|
|
|
case WII_CHECK_EXTENSION_STATE: // This is used to check if there is anything plugged in to the extension port
|
|
#ifdef DEBUG_USB_HOST
|
|
if(stateCounter == 0) // Only print onnce
|
|
Notify(PSTR("\r\nChecking if there is any extension connected"), 0x80);
|
|
#endif
|
|
stateCounter++; // We use this counter as there has to be a short delay between the commands
|
|
if(stateCounter == 1)
|
|
statusRequest(); // See if a new device has connected
|
|
if(stateCounter == 100) {
|
|
if(unknownExtensionConnected) // Check if there is a extension is connected to the port
|
|
initExtension1();
|
|
else
|
|
stateCounter = 499;
|
|
} else if(stateCounter == 200)
|
|
initExtension2();
|
|
else if(stateCounter == 300) {
|
|
readExtensionType();
|
|
unknownExtensionConnected = false;
|
|
} else if(stateCounter == 400) {
|
|
if(wii_check_flag(WII_FLAG_CALIBRATE_BALANCE_BOARD)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nReading Wii Balance Board calibration values"), 0x80);
|
|
#endif
|
|
readWiiBalanceBoardCalibration();
|
|
} else
|
|
stateCounter = 499;
|
|
} else if(stateCounter == 500) {
|
|
stateCounter = 0;
|
|
l2cap_state = TURN_ON_LED;
|
|
}
|
|
break;
|
|
|
|
case WII_INIT_MOTION_PLUS_STATE:
|
|
stateCounter++;
|
|
if(stateCounter == 1)
|
|
initMotionPlus();
|
|
else if(stateCounter == 100)
|
|
activateMotionPlus();
|
|
else if(stateCounter == 200)
|
|
readExtensionType(); // Check if it has been activated
|
|
else if(stateCounter == 300) {
|
|
stateCounter = 0;
|
|
unknownExtensionConnected = false; // The motion plus will send a status report when it's activated, we will set this to false so it doesn't reinitialize the Motion Plus
|
|
l2cap_state = TURN_ON_LED;
|
|
}
|
|
break;
|
|
|
|
case TURN_ON_LED:
|
|
if(wii_check_flag(WII_FLAG_NUNCHUCK_CONNECTED))
|
|
nunchuckConnected = true;
|
|
wiimoteConnected = true;
|
|
onInit();
|
|
l2cap_state = L2CAP_DONE;
|
|
break;
|
|
|
|
case L2CAP_DONE:
|
|
if(unknownExtensionConnected) {
|
|
#ifdef DEBUG_USB_HOST
|
|
if(stateCounter == 0) // Only print once
|
|
Notify(PSTR("\r\nChecking extension port"), 0x80);
|
|
#endif
|
|
stateCounter++; // We will use this counter as there has to be a short delay between the commands
|
|
if(stateCounter == 50)
|
|
statusRequest();
|
|
else if(stateCounter == 100)
|
|
initExtension1();
|
|
else if(stateCounter == 150)
|
|
if((extensionConnected && motionPlusConnected) || (unknownExtensionConnected && !motionPlusConnected))
|
|
initExtension2();
|
|
else
|
|
stateCounter = 299; // There is no extension connected
|
|
else if(stateCounter == 200)
|
|
readExtensionType();
|
|
else if(stateCounter == 250) {
|
|
if(wii_check_flag(WII_FLAG_NUNCHUCK_CONNECTED)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nNunchuck was reconnected"), 0x80);
|
|
#endif
|
|
activateNunchuck = true;
|
|
nunchuckConnected = true;
|
|
}
|
|
if(!motionPlusConnected)
|
|
stateCounter = 449;
|
|
} else if(stateCounter == 300) {
|
|
if(motionPlusConnected) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nReactivating the Motion Plus"), 0x80);
|
|
#endif
|
|
initMotionPlus();
|
|
} else
|
|
stateCounter = 449;
|
|
} else if(stateCounter == 350)
|
|
activateMotionPlus();
|
|
else if(stateCounter == 400)
|
|
readExtensionType(); // Check if it has been activated
|
|
else if(stateCounter == 450) {
|
|
onInit();
|
|
stateCounter = 0;
|
|
unknownExtensionConnected = false;
|
|
}
|
|
} else
|
|
stateCounter = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/************************************************************/
|
|
/* HID Commands */
|
|
/************************************************************/
|
|
|
|
void WII::HID_Command(uint8_t* data, uint8_t nbytes) {
|
|
if(motionPlusInside)
|
|
pBtd->L2CAP_Command(hci_handle, data, nbytes, interrupt_scid[0], interrupt_scid[1]); // It's the new Wiimote with the Motion Plus Inside or Wii U Pro controller
|
|
else
|
|
pBtd->L2CAP_Command(hci_handle, data, nbytes, control_scid[0], control_scid[1]);
|
|
}
|
|
|
|
void WII::setAllOff() {
|
|
HIDBuffer[1] = 0x11;
|
|
HIDBuffer[2] = 0x00;
|
|
HID_Command(HIDBuffer, 3);
|
|
}
|
|
|
|
void WII::setRumbleOff() {
|
|
HIDBuffer[1] = 0x11;
|
|
HIDBuffer[2] &= ~0x01; // Bit 0 control the rumble
|
|
HID_Command(HIDBuffer, 3);
|
|
}
|
|
|
|
void WII::setRumbleOn() {
|
|
HIDBuffer[1] = 0x11;
|
|
HIDBuffer[2] |= 0x01; // Bit 0 control the rumble
|
|
HID_Command(HIDBuffer, 3);
|
|
}
|
|
|
|
void WII::setRumbleToggle() {
|
|
HIDBuffer[1] = 0x11;
|
|
HIDBuffer[2] ^= 0x01; // Bit 0 control the rumble
|
|
HID_Command(HIDBuffer, 3);
|
|
}
|
|
|
|
void WII::setLedRaw(uint8_t value) {
|
|
HIDBuffer[1] = 0x11;
|
|
HIDBuffer[2] = value | (HIDBuffer[2] & 0x01); // Keep the rumble bit
|
|
HID_Command(HIDBuffer, 3);
|
|
}
|
|
|
|
void WII::setLedOff(LEDEnum a) {
|
|
HIDBuffer[1] = 0x11;
|
|
HIDBuffer[2] &= ~(pgm_read_byte(&WII_LEDS[(uint8_t)a]));
|
|
HID_Command(HIDBuffer, 3);
|
|
}
|
|
|
|
void WII::setLedOn(LEDEnum a) {
|
|
if(a == OFF)
|
|
setLedRaw(0);
|
|
else {
|
|
HIDBuffer[1] = 0x11;
|
|
HIDBuffer[2] |= pgm_read_byte(&WII_LEDS[(uint8_t)a]);
|
|
HID_Command(HIDBuffer, 3);
|
|
}
|
|
}
|
|
|
|
void WII::setLedToggle(LEDEnum a) {
|
|
HIDBuffer[1] = 0x11;
|
|
HIDBuffer[2] ^= pgm_read_byte(&WII_LEDS[(uint8_t)a]);
|
|
HID_Command(HIDBuffer, 3);
|
|
}
|
|
|
|
void WII::setLedStatus() {
|
|
HIDBuffer[1] = 0x11;
|
|
HIDBuffer[2] = (HIDBuffer[2] & 0x01); // Keep the rumble bit
|
|
if(wiimoteConnected)
|
|
HIDBuffer[2] |= 0x10; // If it's connected LED1 will light up
|
|
if(motionPlusConnected)
|
|
HIDBuffer[2] |= 0x20; // If it's connected LED2 will light up
|
|
if(nunchuckConnected)
|
|
HIDBuffer[2] |= 0x40; // If it's connected LED3 will light up
|
|
|
|
HID_Command(HIDBuffer, 3);
|
|
}
|
|
|
|
uint8_t WII::getBatteryLevel() {
|
|
checkBatteryLevel = true; // This is needed so the library knows that the status response is a response to this function
|
|
statusRequest(); // This will update the battery level
|
|
return batteryLevel;
|
|
};
|
|
|
|
void WII::setReportMode(bool continuous, uint8_t mode) {
|
|
uint8_t cmd_buf[4];
|
|
cmd_buf[0] = 0xA2; // HID BT DATA_request (0xA0) | Report Type (Output 0x02)
|
|
cmd_buf[1] = 0x12;
|
|
if(continuous)
|
|
cmd_buf[2] = 0x04 | (HIDBuffer[2] & 0x01); // Keep the rumble bit
|
|
else
|
|
cmd_buf[2] = 0x00 | (HIDBuffer[2] & 0x01); // Keep the rumble bit
|
|
cmd_buf[3] = mode;
|
|
HID_Command(cmd_buf, 4);
|
|
}
|
|
|
|
void WII::statusRequest() {
|
|
uint8_t cmd_buf[3];
|
|
cmd_buf[0] = 0xA2; // HID BT DATA_request (0xA0) | Report Type (Output 0x02)
|
|
cmd_buf[1] = 0x15;
|
|
cmd_buf[2] = (HIDBuffer[2] & 0x01); // Keep the rumble bit
|
|
HID_Command(cmd_buf, 3);
|
|
}
|
|
|
|
/************************************************************/
|
|
/* Memmory Commands */
|
|
/************************************************************/
|
|
|
|
void WII::writeData(uint32_t offset, uint8_t size, uint8_t* data) {
|
|
uint8_t cmd_buf[23];
|
|
cmd_buf[0] = 0xA2; // HID BT DATA_request (0xA0) | Report Type (Output 0x02)
|
|
cmd_buf[1] = 0x16; // Write data
|
|
cmd_buf[2] = 0x04 | (HIDBuffer[2] & 0x01); // Write to memory, clear bit 2 to write to EEPROM
|
|
cmd_buf[3] = (uint8_t)((offset & 0xFF0000) >> 16);
|
|
cmd_buf[4] = (uint8_t)((offset & 0xFF00) >> 8);
|
|
cmd_buf[5] = (uint8_t)(offset & 0xFF);
|
|
cmd_buf[6] = size;
|
|
uint8_t i = 0;
|
|
for(; i < size; i++)
|
|
cmd_buf[7 + i] = data[i];
|
|
for(; i < 16; i++) // Set the rest to zero
|
|
cmd_buf[7 + i] = 0x00;
|
|
HID_Command(cmd_buf, 23);
|
|
}
|
|
|
|
void WII::initExtension1() {
|
|
uint8_t buf[1];
|
|
buf[0] = 0x55;
|
|
writeData(0xA400F0, 1, buf);
|
|
}
|
|
|
|
void WII::initExtension2() {
|
|
uint8_t buf[1];
|
|
buf[0] = 0x00;
|
|
writeData(0xA400FB, 1, buf);
|
|
}
|
|
|
|
void WII::initMotionPlus() {
|
|
uint8_t buf[1];
|
|
buf[0] = 0x55;
|
|
writeData(0xA600F0, 1, buf);
|
|
}
|
|
|
|
void WII::activateMotionPlus() {
|
|
uint8_t buf[1];
|
|
if(pBtd->wiiUProController) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nActivating Wii U Pro Controller"), 0x80);
|
|
#endif
|
|
buf[0] = 0x00; // It seems like you can send anything but 0x04, 0x05, and 0x07
|
|
} else if(activateNunchuck) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nActivating Motion Plus in pass-through mode"), 0x80);
|
|
#endif
|
|
buf[0] = 0x05; // Activate nunchuck pass-through mode
|
|
}//else if(classicControllerConnected && extensionConnected)
|
|
//buf[0] = 0x07;
|
|
else {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nActivating Motion Plus in normal mode"), 0x80);
|
|
#endif
|
|
buf[0] = 0x04; // Don't use any extension
|
|
}
|
|
writeData(0xA600FE, 1, buf);
|
|
}
|
|
|
|
void WII::readData(uint32_t offset, uint16_t size, bool EEPROM) {
|
|
uint8_t cmd_buf[8];
|
|
cmd_buf[0] = 0xA2; // HID BT DATA_request (0xA0) | Report Type (Output 0x02)
|
|
cmd_buf[1] = 0x17; // Read data
|
|
if(EEPROM)
|
|
cmd_buf[2] = 0x00 | (HIDBuffer[2] & 0x01); // Read from EEPROM
|
|
else
|
|
cmd_buf[2] = 0x04 | (HIDBuffer[2] & 0x01); // Read from memory
|
|
cmd_buf[3] = (uint8_t)((offset & 0xFF0000) >> 16);
|
|
cmd_buf[4] = (uint8_t)((offset & 0xFF00) >> 8);
|
|
cmd_buf[5] = (uint8_t)(offset & 0xFF);
|
|
cmd_buf[6] = (uint8_t)((size & 0xFF00) >> 8);
|
|
cmd_buf[7] = (uint8_t)(size & 0xFF);
|
|
|
|
HID_Command(cmd_buf, 8);
|
|
}
|
|
|
|
void WII::readExtensionType() {
|
|
readData(0xA400FA, 6, false);
|
|
}
|
|
|
|
void WII::readCalData() {
|
|
readData(0x0016, 8, true);
|
|
}
|
|
|
|
void WII::checkMotionPresent() {
|
|
readData(0xA600FA, 6, false);
|
|
}
|
|
|
|
void WII::readWiiBalanceBoardCalibration() {
|
|
readData(0xA40024, 24, false);
|
|
}
|
|
|
|
/************************************************************/
|
|
/* WII Commands */
|
|
/************************************************************/
|
|
|
|
bool WII::getButtonPress(ButtonEnum b) { // Return true when a button is pressed
|
|
if(wiiUProControllerConnected)
|
|
return (ButtonState & pgm_read_dword(&WII_PROCONTROLLER_BUTTONS[(uint8_t)b]));
|
|
else
|
|
return (ButtonState & pgm_read_dword(&WII_BUTTONS[(uint8_t)b]));
|
|
}
|
|
|
|
bool WII::getButtonClick(ButtonEnum b) { // Only return true when a button is clicked
|
|
uint32_t button;
|
|
if(wiiUProControllerConnected)
|
|
button = pgm_read_dword(&WII_PROCONTROLLER_BUTTONS[(uint8_t)b]);
|
|
else
|
|
button = pgm_read_dword(&WII_BUTTONS[(uint8_t)b]);
|
|
bool click = (ButtonClickState & button);
|
|
ButtonClickState &= ~button; // clear "click" event
|
|
return click;
|
|
}
|
|
|
|
uint8_t WII::getAnalogHat(HatEnum a) {
|
|
if(!nunchuckConnected)
|
|
return 127; // Return center position
|
|
else {
|
|
uint8_t output = hatValues[(uint8_t)a];
|
|
if(output == 0xFF || output == 0x00) // The joystick will only read 255 or 0 when the cable is unplugged or initializing, so we will just return the center position
|
|
return 127;
|
|
else
|
|
return output;
|
|
}
|
|
}
|
|
|
|
uint16_t WII::getAnalogHat(AnalogHatEnum a) {
|
|
if(!wiiUProControllerConnected)
|
|
return 2000;
|
|
else {
|
|
uint16_t output = hatValues[(uint8_t)a];
|
|
if(output == 0x00) // The joystick will only read 0 when it is first initializing, so we will just return the center position
|
|
return 2000;
|
|
else
|
|
return output;
|
|
}
|
|
}
|
|
|
|
void WII::onInit() {
|
|
if(pFuncOnInit)
|
|
pFuncOnInit(); // Call the user function
|
|
else
|
|
setLedStatus();
|
|
}
|
|
|
|
/************************************************************/
|
|
/* Wii Balance Board Commands */
|
|
/************************************************************/
|
|
|
|
float WII::getWeight(BalanceBoardEnum pos) {
|
|
// Use interpolating between two points - based on: https://github.com/skorokithakis/gr8w8upd8m8/blob/master/gr8w8upd8m8.py
|
|
// wiiBalanceBoardCal[pos][0] is calibration values for 0 kg
|
|
// wiiBalanceBoardCal[pos][1] is calibration values for 17 kg
|
|
// wiiBalanceBoardCal[pos][2] is calibration values for 34 kg
|
|
if(wiiBalanceBoardRaw[pos] < wiiBalanceBoardCal[0][pos])
|
|
return 0.0f; // Below 0 kg
|
|
else if(wiiBalanceBoardRaw[pos] < wiiBalanceBoardCal[1][pos]) // Between 0 and 17 kg
|
|
return 17.0f * (float)(wiiBalanceBoardRaw[pos] - wiiBalanceBoardCal[0][pos]) / (float)(wiiBalanceBoardCal[1][pos] - wiiBalanceBoardCal[0][pos]);
|
|
else // More than 17 kg
|
|
return 17.0f + 17.0f * (float)(wiiBalanceBoardRaw[pos] - wiiBalanceBoardCal[1][pos]) / (float)(wiiBalanceBoardCal[2][pos] - wiiBalanceBoardCal[1][pos]);
|
|
};
|
|
|
|
float WII::getTotalWeight() {
|
|
return getWeight(TopRight) + getWeight(BotRight) + getWeight(TopLeft) + getWeight(BotLeft);
|
|
};
|
|
|
|
/************************************************************/
|
|
/* The following functions are for the IR camera */
|
|
/************************************************************/
|
|
|
|
#ifdef WIICAMERA
|
|
|
|
void WII::IRinitialize() { // Turns on and initialises the IR camera
|
|
|
|
enableIRCamera1();
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nEnable IR Camera1 Complete"), 0x80);
|
|
#endif
|
|
delay(80);
|
|
|
|
enableIRCamera2();
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nEnable IR Camera2 Complete"), 0x80);
|
|
#endif
|
|
delay(80);
|
|
|
|
write0x08Value();
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nWrote hex number 0x08"), 0x80);
|
|
#endif
|
|
delay(80);
|
|
|
|
writeSensitivityBlock1();
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nWrote Sensitivity Block 1"), 0x80);
|
|
#endif
|
|
delay(80);
|
|
|
|
writeSensitivityBlock2();
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nWrote Sensitivity Block 2"), 0x80);
|
|
#endif
|
|
delay(80);
|
|
|
|
uint8_t mode_num = 0x03;
|
|
setWiiModeNumber(mode_num); // Change input for whatever mode you want i.e. 0x01, 0x03, or 0x05
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSet Wii Mode Number To 0x"), 0x80);
|
|
D_PrintHex<uint8_t > (mode_num, 0x80);
|
|
#endif
|
|
delay(80);
|
|
|
|
write0x08Value();
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nWrote Hex Number 0x08"), 0x80);
|
|
#endif
|
|
delay(80);
|
|
|
|
setReportMode(false, 0x33);
|
|
//setReportMode(false, 0x3f); // For full reporting mode, doesn't work yet
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSet Report Mode to 0x33"), 0x80);
|
|
#endif
|
|
delay(80);
|
|
|
|
statusRequest(); // Used to update wiiState - call isIRCameraEnabled() afterwards to check if it actually worked
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nIR Initialized"), 0x80);
|
|
#endif
|
|
}
|
|
|
|
void WII::enableIRCamera1() {
|
|
uint8_t cmd_buf[3];
|
|
cmd_buf[0] = 0xA2; // HID BT DATA_request (0xA0) | Report Type (Output 0x02)
|
|
cmd_buf[1] = 0x13; // Output report 13
|
|
cmd_buf[2] = 0x04 | (HIDBuffer[2] & 0x01); // Keep the rumble bit and sets bit 2
|
|
HID_Command(cmd_buf, 3);
|
|
}
|
|
|
|
void WII::enableIRCamera2() {
|
|
uint8_t cmd_buf[3];
|
|
cmd_buf[0] = 0xA2; // HID BT DATA_request (0xA0) | Report Type (Output 0x02)
|
|
cmd_buf[1] = 0x1A; // Output report 1A
|
|
cmd_buf[2] = 0x04 | (HIDBuffer[2] & 0x01); // Keep the rumble bit and sets bit 2
|
|
HID_Command(cmd_buf, 3);
|
|
}
|
|
|
|
void WII::writeSensitivityBlock1() {
|
|
uint8_t buf[9];
|
|
buf[0] = 0x00;
|
|
buf[1] = 0x00;
|
|
buf[2] = 0x00;
|
|
buf[3] = 0x00;
|
|
buf[4] = 0x00;
|
|
buf[5] = 0x00;
|
|
buf[6] = 0x90;
|
|
buf[7] = 0x00;
|
|
buf[8] = 0x41;
|
|
|
|
writeData(0xB00000, 9, buf);
|
|
}
|
|
|
|
void WII::writeSensitivityBlock2() {
|
|
uint8_t buf[2];
|
|
buf[0] = 0x40;
|
|
buf[1] = 0x00;
|
|
|
|
writeData(0xB0001A, 2, buf);
|
|
}
|
|
|
|
void WII::write0x08Value() {
|
|
uint8_t cmd = 0x08;
|
|
writeData(0xb00030, 1, &cmd);
|
|
}
|
|
|
|
void WII::setWiiModeNumber(uint8_t mode_number) { // mode_number in hex i.e. 0x03 for extended mode
|
|
writeData(0xb00033, 1, &mode_number);
|
|
}
|
|
#endif
|