varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/yandrstudio/nz64
History
Joel Challis 805324c456
Remove more legacy config.h options (#21709)
2023-08-08 09:06:38 +01:00
..
keymaps Open Use standard magic keycodes in yandrstudio keymaps (#19919) 2023-02-23 14:46:15 +00:00
board.h Fixup ChibiOS header inclusion search ordering. (#19623) 2023-01-19 01:05:29 +00:00
config.h Remove more legacy config.h options (#21709) 2023-08-08 09:06:38 +01:00
halconf.h
info.json Move RGBLED_NUM to data driven (#21278) 2023-06-18 14:39:07 +10:00
mcuconf.h
nz64.c Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
nz64.h Move single LAYOUTs to data driven (#20365) 2023-04-12 13:42:51 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

nz64

A 64 keys keyboard with rgb (keys). This keyboard use 16mhz HSE and STM32F401 as MCU.

Make example for this keyboard (after setting up your build environment):

make yandrstudio/nz64:default

See build environment setup then the make instructions for more information.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard
  • Physical reset pins: Short circuit the bt0 and vcc pins on the back of the PCB and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.