qmk_firmware/keyboards/4pplet/waffling60/rev_d_iso

waffling60

A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support.

More info: https://geekhack.org/index.php?topic=103531.0

• Keyboard Maintainer: 4pplet
• Hardware Supported: waffling60

Make example for this keyboard (after setting up your build environment):

make 4pplet/waffling60/rev_d_iso:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

• Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
• Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it or tap the reset button.

Alternative option if the firmware is already pre-flashed:

• Unplug your keyboard, hold down the Esc key, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.