varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/geekboards/macropad_v2
History
Ryan e837a32b2b
Move layouts for direct_pins boards to data driven (#19872)
2023-02-19 18:55:12 +11:00
..
keymaps VIA V3 - The Custom UI Update (#18222) 2022-11-10 07:46:44 +11:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h Migrate DIRECT_PINS to data driven (#19826) 2023-02-14 00:39:41 -07:00
halconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
info.json Move layouts for direct_pins boards to data driven (#19872) 2023-02-19 18:55:12 +11:00
macropad_v2.c Move layouts for direct_pins boards to data driven (#19872) 2023-02-19 18:55:12 +11:00
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
readme.md [Keyboard] Geekboards Macropad V2 keyboard (#11045) 2020-12-08 15:58:32 -08:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

geekboards/macropad_v2

Geekboards Macropad v2

8-keys macropad with CNC aluminium case, RGB LEDs for both backlight and switches, hot-swap connectors.

Keyboard Maintainer: ruddy17
Hardware Supported: Geekboards Macropad v2, STM32F072C8T6
Hardware Availability: https://geekboards.ru

Compile instruction for this keyboard (after setting up your build environment):

make geekboards/macropad_v2:via

Update firmware

Enter bootloader

  1. Press and hold leftmost button on top row (where ESC usually is)
  2. Plug in USB
  3. Keep holding the button for 3 more seconds
  4. Release the button

Alternatively:

  1. Remove bottom cover
  2. On the pcb short together two contacts labeled BOOT0
  3. Plug in USB
  4. Release BOOT0

Flash

make geekboards/macropad_v2:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.