varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/handwired/onekey/blackpill_f411_tinyuf2
History
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
chconf.h
config.h
halconf.h
mcuconf.h
readme.md
rules.mk Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

readme.md

f411 blackpill onekey

Supported Hardware: STM32F411CEU6 WeAct v1.3.

To trigger keypress, short together pins B0 and A7.

This variant requires the TinyUF2 bootloader to be installed. This can be downloaded from the tinyuf2 releases page. The F401 blackpill binary works for both F401- and F411-based blackpill devices.

Double-tap reset to enter bootloader mode. Copy the built uf2 file to the device by dragging the file to the new USB disk.