History

Ryan 02ccc50e60 Remove more empty headers (#20155 )		2023-03-17 14:02:04 +11:00
..
rev_a	Remove more empty headers (#20155 )	2023-03-17 14:02:04 +11:00
rev_b	Move matrix config to info.json, part 1 (#19985 )	2023-03-05 22:53:52 +00:00
rev_c	Move matrix config to info.json, part 1 (#19985 )	2023-03-05 22:53:52 +00:00
rev_d	Move matrix config to info.json, part 1 (#19985 )	2023-03-05 22:53:52 +00:00
rev_d_ansi	Move matrix config to info.json, part 1 (#19985 )	2023-03-05 22:53:52 +00:00
rev_d_iso	Move matrix config to info.json, part 1 (#19985 )	2023-03-05 22:53:52 +00:00
readme.md	[Keyboard] Add waffling60 Rev D ISO Hotswap (#18372 )	2022-10-01 10:44:52 -07:00

readme.md

waffling60

A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support.

More info: https://geekhack.org/index.php?topic=103531.0

Keyboard Maintainer: 4pplet
Hardware Supported: waffling60

Make example for this keyboard (after setting up your build environment):

make 4pplet/waffling60/rev_a:default
make 4pplet/waffling60/rev_b:default
make 4pplet/waffling60/rev_c:default

make 4pplet/waffling60/rev_d:default
make 4pplet/waffling60/rev_d_ansi:default
make 4pplet/waffling60/rev_d_iso:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

Tap the physical reset button or short the reset-header (labled RESET) on tha back of the PCB for keyboard to enter DFU. When in DFU, it's ready to flash the firmware.

Alternative option if the firmware is already pre-flashed:

Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.