History

Joel Challis c7c510f53f Specifying the default board file is redundant (#20807 )		2023-05-08 18:05:29 -06:00
..
keymaps	Remove useless line continuations (#19399 )	2022-12-30 11:48:05 +11:00
chconf.h	[Keyboard] add E80-1800 PCB (#16645 )	2022-04-12 23:20:07 -07:00
config.h	Remove usages of config_common.h from config.h files. (#19714 )	2023-01-31 06:03:30 +11:00
halconf.h	[Keyboard] add E80-1800 PCB (#16645 )	2022-04-12 23:20:07 -07:00
info.json	Specifying the default board file is redundant (#20807 )	2023-05-08 18:05:29 -06:00
mcuconf.h	[Keyboard] add E80-1800 PCB (#16645 )	2022-04-12 23:20:07 -07:00
readme.md	[Keyboard] add E80-1800 PCB (#16645 )	2022-04-12 23:20:07 -07:00
rules.mk	[Keyboard] moved E80-1800 to data driven configuration (#19199 )	2022-12-12 18:35:49 -08:00

readme.md

E80-1800

A replacement PCB for the Cherry G80-1800 keyboard. Supports ISO and ANSI, 6u offcenter or 7u bottom row, stepped and regular caps lock. Optional i2c header for OLED. Type-C on the PCB (requires some case modifications). The PCB is open source and can be found in my Github repo.

Keyboard Maintainer: ebastler
Hardware Supported: r1 and r1.1 PCB, see Github repo linked above
Hardware Availability: Groupbuy, otherwise feel free to order your own boards. jlcpcb compatible gerber/BOM/CPL files are included.

How to enter the Bootloader:

No pre-flashed firmware, option 1: Bridge BOOT labeled pads below spacebar while plugging the board in
No pre-flashed firmware, option 2: Bridge BOOT labeled pads below spacebar, then quickly short RST labeled pads
Pre-flashed firmware: Use Bootmagic - keep the ESC (top left most) key pressed while plugging the board in

Make example for this keyboard (after setting up your build environment):

make ebastler/e80_1800:default

Flash example for this keyboard (after setting up your build environment):

make ebastler/e80_1800:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.