forked from forks/qmk_firmware
32 lines
1.7 KiB
C
32 lines
1.7 KiB
C
// Copyright 2022 David Hoelscher (@customMK)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#pragma once
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter ST7735 additional command opcodes
|
|
|
|
// Panel Function Commands
|
|
#define ST7735_SET_FRAME_RATE_CTL_1 0xB1 // Set frame rate control 1
|
|
#define ST7735_SET_FRAME_RATE_CTL_2 0xB2 // Set frame rate control 2
|
|
#define ST7735_SET_FRAME_RATE_CTL_3 0xB3 // Set frame rate control 3
|
|
#define ST7735_SET_INVERSION_CTL 0xB4 // Set inversion mode control
|
|
#define ST7735_SET_DISPLAY_CTL 0xB6 // Set display control 5
|
|
#define ST7735_SET_POWER_CTL_1 0xC0 // Set GVDD
|
|
#define ST7735_SET_POWER_CTL_2 0xC1 // Set VGH and VGL
|
|
#define ST7735_SET_POWER_CTL_3 0xC2 // Set normal mode op amp current
|
|
#define ST7735_SET_POWER_CTL_4 0xC3 // Set idle mode op amp current
|
|
#define ST7735_SET_POWER_CTL_5 0xC4 // Set partial mode op amp current
|
|
#define ST7735_SET_VCOM_CTL 0xC5 // Set VCOM voltages
|
|
#define ST7735_SET_VCOM_OFFSET_CTL 0xC7 // Set VCOM offset ctl
|
|
#define ST7735_SET_LCD_ID 0xD1 // Set LCD module version
|
|
#define ST7735_SET_PROJECT_ID 0xD2 // Set product project ID
|
|
#define ST7735_SET_POWER_CTL_6 0xFC // Set partial+idle op amp current
|
|
#define ST7735_SET_NVMEM_CTL_STATUS 0xD9 // EEPROM Control Status
|
|
#define ST7735_SET_NVMEM_READ_CMD 0xCC // EEPROM Read Command
|
|
#define ST7735_SET_NVMEM_WRITE_CMD 0xDF // EEPROM Write Command
|
|
#define ST7735_SET_PGAMMA 0xE0 // Set positive gamma
|
|
#define ST7735_SET_NGAMMA 0xE1 // Set negative gamma
|
|
#define ST7735_SET_EXTENSION_ENABLE 0xF0 // Enable extension command
|
|
#define ST7735_SET_VCOM_DELAY 0xFF // Set VCOM delay time
|