* 52 Keymap.json: Set for Hillside 52
- Change script rows
* 52 Keymap.c: mirror .json
CAPSWORD, QK_BOOT, readme cleanup, EE_RST
* 52 Keymap.json: Initial files copy from 56
* 52 Keymap.json nav/edit lay, thumb shift, syms
- Del in backspace spot on sym layer
- Thumb shift OSM instead of extra space
- Nav/edit on num/fn: arrows cut copy paste undo redo, page up/down
- Fn keys bottom row to allow nav edit keys
- App and AltGr on lower row, on their layer
- Braces on index, so more common -= on middle ring.
- Adjust has Ctrl/GUI swap
- EE_RST, CAPSWORD, QK_BOOT, SPLIT_DETECT
* 52 Family: readme image and folder link
* 52 Board: initial copy from 56
* 52 Keymap via
* 52 Board: remove keys, cant columns, better ids
- .json: vid: MM, pid: H52
* 52 Keymap.c: initial.c copy from 48
* QK_BOOT EE_CLR, not ANY(), as config.qmk supports
- CAPSWRD instead of ANY, though config.qmk still converts to ANY()
* Cleanup readme
* 52 Keymap: Remove redundant key, cleanup script
* 52 Keymap: Fix template
* 52 Readme: Link lower res image better for readme
Co-authored-by: Drashna Jaelre <drashna@live.com>
* 52 Keymap: Move pretty-print script to GitHub wiki
* 52 Keymap: Link to 1024 res image thumbnails
* 52 Keymap: fix whitespace before image link
* Family: Fix image link to 1024 thumb
Co-authored-by: Drashna Jaelre <drashna@live.com>
* 52: Keymap: Caps word on a layer home row
* 52: Keymap: Arrows on right. Symmetric layer keys.
- Nav:
- Arrows on right so up/down more intuitive. Page up/down on ends
- Cut on home row, as more common
- Sym:
- Layer mods on activate hand, extras symbols on left
- Common digits on lower row
- Base:
- Layer keys symmetric, on most extended, not resting, thumb
- Mute on util key for easy use
- Swap layers 3 and 4 to match swapped thumbs
Co-authored-by: mmccoyd <mmccoyd@cs.berkley.edu>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Unfortunately, the crippled versions of “Bluepill” boards with
STM32F103C6xx chips instead of STM32F103C8xx are now sold all over the
place, sometimes advertised in a confusing way to make the difference
not noticeable until too late. Add minimal support for these MCUs in
the common “Bluepill with stm32duino” configuration, so that it could be
possible to make something useful from those boards (although fitting
QMK into the available 24 KiB of flash may be rather hard).
(In fact, I'm not sure whether the “STM32” part of the chip name is
actually correct for those boards of uncertain origin, so the onekey
board name is `bluepill_f103c6`; another reason for that name is to
match the existing `blackpill_f401` and `blackpill_f411`.)
The EEPROM emulation support is not included on purpose, because
enabling it without having a working firmware size check would be
irresponsible with such flash size (the chance that someone would build
a firmware where the EEPROM backing store ends up overlapping some
firmware code is really high). Other than that, enabling the EEPROM
emulation code is mostly trivial (the `wear_leveling` driver with the
`embedded_flash` backing store even works without any custom
configuration, although its code is significantly larger than the
`vendor` driver, which may also be important for such flash size).
* Initial commit
* testing modes
* working on puckbuddy firmware. This is all working for now but need to clean it up and personalize it.
* needs to be updated from vial build
* prepping for PR
* added rgb mode cycling to fn1 since it isn't on the encoder for these maps
* readme written in preparation for pr
* reverting driver print line
* Removed old reference to OBE in the readme from copypaste error
* applying changes based on review
* applying changes from review
* Update keyboards/mechwild/puckbuddy/puckbuddy.c
* trailing whitespaces removed
* added clear screen condition for switching back to name rendering
* Added uf2 keymap and fixed display glitch for the logo render art.
* Removed extra definition of FEE_PAGE_BASE_ADDRESS
* Removed the uf2 keymap and made it automatic when selecting bootloader instead
* Fixed the bad bootloader check
* moved the uf2 check from rules.mk to post_rules.mk to satisfy lint
* changing it back to stm32-dfu bootloader default
* Fixed RGBLIGHT enable oversight.
* Added persistent dynamic tapping configuration for the cirque touchpad tap term
* new lines at end of files for formatting and diff sanity
* changing default bootloader back to stm32-dfu
* Had to completely redefine the tap keycodes instead of using the DT_UP and DT_DOWN keycodes because I was not able to specify them easily in the via/vial configs and this allows me to keep the original functionality instead of tying it to eeprom like these are.
* Added tap toggling keycodes to quick enable and disable the tapping term
* working out an issue where the tap status keeps turning to off on power cycle
* correcting submodule garbo
* Fixed display issue and rewrote TAP config approach to make it a little easier to control
* removing backup puckbuddy.c code
* Added some comment, removed some commented out old code, removed trailing whitespace
* Changed to handle tinyuf2 by expecting emulated eeprom so that adding other forms of eeprom can be handled for the memory offset separately, and added user oled conditional inside the keyboard oled code block
* Updated default keymaps to have the tap and dpi keys on by default
* Apply suggestions from code review
* Apply suggestions from code review
* Reverted to most usable configuration for RDP usage.
* Added some HSV color definitions without the value portion to allow using the existing value.
* Switched to using HSV and HS color definitions.
* Added media keys to the convenience layer.
* Updated make rules to enable media keys.
* Cleaned up planck make rules.
* boardsource/the_mark: add QMK Configurator layout data
* add keyboard maintainers to info.json
Adds the individual and organization accounts as listed maintainers.
* skergo.h: use ___ for KC_NO
* skergo.h: use 3-character notation
* skergo.h: add matrix diagram
* add LAYOUT_all macro
* update grid alignment of LAYOUT macro and keymaps
* refactor keymaps
Refactor keymaps to use the `LAYOUT_all` macro. Converts tabs to spaces.
This change necessitates the following changes to keymaps:
- The keycodes for Page Up, Page Down, and End each move up one row - all as the last keys on their new rows.
- The keycode for the secondary B key moves up one row, inserted between the primary (left side) B and the N.
* remove LAYOUT macro
* rename LAYOUT_all macro to LAYOUT_split_bs
* add LAYOUT_2u_bs macro
* readme.md: add flashing example
* info.json: correct maintainer value
Update to reference maintainer's GitHub username.
* info.json: apply friendly formatting
* info.json: correct layout data
Fix the size and position of the Backslash key.
* readme.md: touch-up formatting
* readme.md: switch Bootloader and Docs sections
* correct keyboard maintainer
* kbdfans/bounce/75/hotswap: keymap readability fix
Update grid alignment to disambiguate which keycodes correspond in different layers.
----
Layer 0 had 13 and 9 keycodes on the bottom two rows respectively, while Layers 1-3 had 14 and 8.
* kbdfans/bounce/75/soldered: keymap readability fix
Update grid alignment to disambiguate which keycodes correspond in different layers.
----
Layer 0 had 14 and 9 keycodes on the bottom two rows respectively, while Layers 1-3 had 15 and 8.
* kbdfans/bounce/75/soldered: fix layer index in keymaps
Layer indexes were 0,1,2,1 instead of 0,1,2,3.
* Start of dz65v2 map for sbennett13
* No wpm, disable some rgb, ~copyright~
* No more raindrops
* Remove more rgb modes and set default
* Almost orgot this crappy thing
* cannot define startup :(
* Layered esc is kc_grv
* Start of dz65v2 map for sbennett13
* No wpm, disable some rgb, ~copyright~
* No more raindrops
* Remove more rgb modes and set default
* Almost orgot this crappy thing
* cannot define startup :(
* Layered esc is kc_grv
* Add license to config and keymap
* skjoldr.h: use ___ for KC_NO
* skjoldr.h: use K<row><column> notation
Matrix was previously defined using identifiers in the format of K<column><row>.
* skjoldr.h: add matrix diagram
* info.json: apply friendly formatting
- key legends as labels
- correct key sizes and positioning
* refactor keymaps
Refactors the `default` and `via` keymaps.
- use QMK-native keycode aliases
- grid-align keycodes for readability
* rename LAYOUT macro to LAYOUT_60_ansi_arrow
* enable Community Layout support
* info.json: correct maintainer value
Field is meant to reference the maintainer's GitHub username.
* bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus
Upcoming support for the following (adapter, mcu) pairs will be
submitted in follow-up PRs:
- `v2/elitec`
- `v2/stemcell`
- `blackpill`
This PR contains the following changes:
- Move previous implementation to an inner `v1/elitec` folder
- Move keyboard USB IDs and strings to data driven
- Update headers to update maintainers list
- Run `qmk format-c`
* bastardkb/charybdis: remove broken acceleration implementation
* bastardkb/charybdis: fix debug output
* bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair
* bastardkb: add Blackpill support
* bastardkb/charybdis/3x5: add `bstiq` keymap
* bastardkb/charybdis: add fake LEDs to the configuration
For the Charybdis 3x5 (respectively 4x6), the LED config now simulates
36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to
prevent confusion when testing LEDs during assembly when handedness is
not set correctly. Those fake LEDs are bound to the physical
bottom-left corner.
* bastardkbk/charybdis/readme.md: update build commands
Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield.
* bastardkb/charybdis: fix Via keymap with blackpill
* bastardkb/charybdis: add 3x6 configuration
* bastardkb/charybdis: remove unnecessary files
* bastardkb/charybdis: remove obsolete code
* bastardkb/charybdis/3x6: add Via keymap
* bastardkb: add support for Splinky (RP2040) board
* bastardkb: initial configuration for the Splinky (SPI not working yet)
* bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball
* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins
* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins
* bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball
* bastardkb/charybdis/3x6: add splinky config
* bastardkb/*/v2/splinky: update drivers to `vendor`
* bastardkb/dilemma: add new board
* bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps
* bastardkb/dilemma: add `bstiq` keymap
* bastardkb: specify blackpill boards
* bastardkb/charybdis: fix blackpill-specific define syntax
* bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options
* bastardkb: fix `QK_BOOT` keycodes
* bastardkb/dilemma: fix mouse direction on X axis
* bastardkb/charybdis/3x6: adjust CS
* bastardkb/dilemma: adjust trackpad configuration
* charybdis: fix `PWM33XX_CS_PIN` defines
This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613.
* bastardkb: remove Vial mentions from `bstiq` keymaps
* Cleanup unnecessary comments
Co-authored-by: Nathan <nathan.cooke@compass.com>
Co-authored-by: Charly Delay <0xcharly@codesink.dev>
* sinanju.h: add matrix diagram
* add LAYOUT_60_ansi_wkl_split_bs_rshift macro
Same matrix as `LAYOUT_all`, but with position K2D (right half of split Backspace) moved to the end of the top row.
* refactor keymaps
- use `LAYOUT_60_ansi_wkl_split_bs_rshift` macro instead of `LAYOUT_all`
- polish four-space indent
- update grid alignment
- replace `RESET` keycode with `QK_BOOT`
* remove now-unused LAYOUT_all macro
* add LAYOUT_60_ansi_wkl macro with keymap
Add a layout with 2u Backspace and 2.75u right Shift.
* info.json: correct maintainer value
* Initial Apollo87H support
* Define RGB animations and default animation
* Add proper per-key RGB support
* Adjust LED positions
* Separate delta-gamma
* Fine-tune LED positions
* fix up GAMMA revision
* fix up tabs indentation to spaces indentation
* Fixed positioning and CS-SW defs for some LEDs
* Fix INS RGB position
* Fine-tune LED positions, fix default RGB
* Update readme's
* Rename LAYOUT_87H to lowercase 87h
* Formatting gamma's rules.mk
* Formatting delta's rules.mk
* Use smaller readme image
* Use smaller README image
* First support for 87H-T-SC and 88H-T-SC
* Update README
* Fix layout naming
* Remove
* Remove EEPROM definitions, fix missing RGB LED mod/alpha definer
* Add suggestions from noroadsleft
* chiffre refactor for new revisions
* updated led matrix config
* updated per suggestions
* add tapdance enable
* revert tapdance (none defined in the default keymaps)
* clean up rules
* add readme for HE
* remove notes in readme
* fix perm
* fix perms
* Fix spacing on readme
* fix perm
* fix perms again?
* Added autoclicker, better mouse, vim like FN layer and more.
* Updated docs to comply with guidelines
* Fixed Imgur links
* increased step sizes
* updated readme to reflect step size
* Added second delay array for autoclicker to compensate for RGB animation CPU loads
* better RGB effects and updated docs
* better README.md formatting
* added DEBONCE libinput workaround for Linux
* fixed formatting
* fixed typos and clarified
* fixed layer picture order
* Update keyboards/dztech/dz65rgb/keymaps/yuannan/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/dztech/dz65rgb/keymaps/yuannan/README.md
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Updated Docs and rules
* Updated with the new deferred exec API to ensure more consistant CPS
* renamed README.md to be lower case to comply with fauxpark's request
* Remapped alt to be left instead of right for compatibility reasons
* Update keyboards/dztech/dz65rgb/keymaps/yuannan/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* added files for EVO70
* updated info.json and readme
* ran qmk lint and fixed typo in info.json
* removed defines from config.h in favor of info.json
* removed an unnecssary include
* removed unnecessary code
* updated rules.mk to remove mention of Bluetooth
* corrected edit to rules.mk
* added code for OLED menu display
* removed extraneous comments and spaces
* added bongo cat animation
* Update keyboards/custommk/evo70/rules.mk
* Update keyboards/custommk/evo70/config.h
* Modified Bongocat graphics to match original proportions
* updated info.json device version
* updated OLED splash screen display timing
* improved bongo cat tap detection and added backlight breathing to OLED menu
* various improvements to OLED, saving settings, and VIA keymap fix
* removed extraneous define
* custom encoder assignment retained upon powerup, backlight sleep upon suspend
* corrected bongo cat tap detection
* Changed splash screen and bongo cat encoder rotation to use the custom assignments
* removed _default from LAYOUT naming and changed keyboard image to be hosted from imgur
* Force smaller version of image to be used in readme
* allowing the kt60 file to be modified so I can do things while waiting for it to be fixed upstream
* initial commit for mokulua keyboard
* Split the board into mirrored and standard layouts.
* Prepping for PR. Silly keymap added.
* prepped for PR
* Apply suggestions from code review
* Fixing firmware from the refactor that removed the mirrored layout.
* Small tweaks using changes from refactor
* Changed the name of the layouts back to match the original to resolve conflict in info.json
* these files needed to be removed as well, they were added as a part of the refactor
* info.json moveds to be different for each build
* Another file had to be removed and the mirrored.c file changed to call mirrored.h instead of standard.h
* fixing chibios ver
* force deleting to revert
* fixing chibios shit
* Update keyboards/mechwild/mokulua/mirrored/mirrored.c
* Update keyboards/mechwild/mokulua/standard/standard.c
* Removing tabs and replacing with 4 spaces. Small style and formatting changes.
* Adding chocV keyboard
* Fix checklist issues / community layout support
* Remove template cruft from readme
* Fix image url in readme
* Fix image url in readme to raw github content
* Change readme example to use default Keymap
* Remove vestigal config
* More informative keymap readme
* Config.h swapsies
* Remove deprecated features
* Conform / Modernize Rules
* Conform / Modernize Rules
* Clean up spacing
* Update keyboards/chocv/readme.md
Move build docs links to end 👍
* Add correct hand_swap_config matrix for planck_rev6 and planck_rev6_drop
* Make sure indentations are consistent
* Make the rev6 hand_swap_config matrix the default, also correct for ez.
* Move hand_swap_config matrix from planck.c to revision subdirectories
* crkbd:thunderbird2086
* readme
* after code review
* coding format
* minor change
* changed file name
* correct image
* updated readme
* using query to get rgb status
* minor update
* feat(keebwerk): added VIA support keymap for keebwerk nano slider
Added VIA support for keebwerk nano slider, VIA json is keebwerk_nano_via.json
Fixed midi2vol keymap where comma symbol is missing from enum "custom_layers"
* feat(keebwerk): removed VIA json as requested
* Update keyboards/keebwerk/nano_slider/keymaps/via/keymap.c
* Update keyboards/keebwerk/nano_slider/keymaps/via/keymap.c
* Fix(PR): removed file as requested
* solanis.h: add matrix diagram
* refactor keymaps: apply grid alignment
* refactor LAYOUT_all macro
Moves the matrix position identifier for the right half of Split Backspace to the number row.
* added new layout for keebio/iris
* Update keyboards/keebio/iris/keymaps/emp/config.h
* Update keyboards/keebio/iris/keymaps/emp/keymap.c
Replace #defines with enum
* Update keyboards/keebio/iris/keymaps/emp/keymap.c
Made requested changes about formatting and the license.
* Update config.h
Cleaned up formatting
* Update keyboards/keebio/iris/keymaps/emp/keymap.c
Small changes to improve readability:
* changed whitespace in license
* added more whitespace around if/else blocks
* fixed bracket style in places
* [Keyboard] Add Chocofly v1
* PR Feedback
* Small change to keymap.
* Replace KC__VOLUP and KC__VOLDOWN with single underscore version.
* Apply suggestions from code review
* Required for my PC
* Required for my PC
* Nayeon Community Layout support
- macro `LAYOUT_ansi` renamed to `LAYOUT_tkl_f13_ansi_tsangan`
- macro `LAYOUT_iso` renamed to `LAYOUT_tkl_f13_iso_tsangan`
- Community Layout support enabled in `rules.mk`
* add LAYOUT_tkl_f13_ansi_tsangan_split_bs_rshift
* add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift
* info.json: update maintainer field
Field is meant to reference the GitHub username of the maintainer.
* PMW33XX drivers overhaul
This combines the PMW3389 and PM3360 drivers as they only differ in the
firmware blobs and CPI get and set functions. The following changes have
been made:
* PMW3389 now gets the same multi-sensor feature that is already available on the
PMW3360.
* Introduced a shared pmw33xx_report_t struct is now directly readable via SPI
transactions instead of individual byte-sized reads, saving multiple
copies and bitshift operations.
* pmw33(89/60)_get_report functions had unreachable branches in their motion
detection logic these have been simplied as much as possible.
* The fast firmware upload option has been removed as this becomes obsolete by
the newly introduced polled waiting functions for ChibiOS polled waiting
* PMW33(60/89)_SPI_LSBFIRST and PMW33(60/89)_SPI_MODE config options
have been removed as they don't need to be configurable.
* All PMW3389 and PMW3360 defines have been unified to a PMW33XX prefix
to reduce code duplication and make the defines interchangeable
* Adjust keyboards to PMW33XX naming scheme
* bm80v2_iso.h: convert tabs to spaces
* bm80v2_iso.h: use ___ for KC_NO
* bm80v2_iso.h: use QMK 3-character notation
* refactor macro for tkl_iso Community Layout compatibility
- move the matrix position identifier for Enter to the home row
* info.json: correct layout data
* rules.mk: tidy-up formatting
* readme.md: tidy-up formatting
* update maintainer; re-assign copyright
* assign ISO-appropriate keycodes in keymaps
* allowing the kt60 file to be modified so I can do things while waiting for it to be fixed upstream
* Initial commit
* testing modes
* working on puckbuddy firmware. This is all working for now but need to clean it up and personalize it.
* needs to be updated from vial build
* prepping for PR
* added rgb mode cycling to fn1 since it isn't on the encoder for these maps
* shipping firmware built. Need to clean up readme and info.json layout
* removing puckbuddy files from this branch
* readme done, prepping for PR
* info.json updated prepping for PR
* Restore cirque driver that was modified from puckbuddy testing on this branch
* applying changes from review
* Update keyboards/mechwild/bbs/bbs.c
* Fixed info.json
* Apply suggestions from code review
* info.json: correct JSON syntax error
* info.json: correct key sizes
* update readme files
Moves nearly all of the information about this keyboard to the 1967st version's readme, because this readme is exposed in QMK Configurator.
Also updates the readme to align more closely with QMK's keyboard readme template.
* info.json: update metadata
Updates the keyboard name and maintainer fields.
