* e6.5 actually already had a 65_ansi_blocker LAYOUT macro, so just had to enable in rules.
* Add the 65_ansi_blocker LAYOUT macro and enable in rules.mk
* rename LAYOUT macro in .h and in the keymap.c as it was only a default keymap. Also enable in rules.mk
* rename but also had to define the existing LAYOUT macro as the new one to prevent breakage of existing keymaps
* add 65_ansi_blocker support for vinta
* forgot to update the info.json on these
* add new default layout 65_ansi_blocker support to alt
* add 65_ansi_blocker support
* undo changes
* Began Work On STM32 Ergodox
Changes to be committed:
new file: keyboards/ergodox_stm32/config.h
new file: keyboards/ergodox_stm32/rules.mk
* test
* Now it compile. Not linking thou
* Screw this Linker. It links now!
* Blinkly Keyboard
* bootloader test code
* Working on matrix / i2c stuff
* Progress (LED Blink)
* Progress on MCP_23017 Status Flag
* [WIP]
* update
* Works! Remeber to change back the bootloader address when the new bootloadrer is ready.
* Time to go debug the i2c
* Finally, it now works with PCB Rev 1.0.2
* updated for rev.2 pcb
* minor compilation fix
* Why when debugger is enabled then everything works.
* Remeber to call init functions.
* Update arm i2c driver to support STM32F103 series device.
* fix include once header. Replaced with #pragma once.
* complication test
* add default LAYOUT_60_ansi
* add LAYOUT_60_hhkb support
* add tsangan_hhkb support
* add ISO support and rename LAYOUT to LAYOUT_all
* formatting
* add community layouts support
* remove unneeded code
* missed a LAYOUT rename
* add link time optimization to reduce firmware size for some people's keymaps
* new keymap for my chocolate tofu65 with dz65rgb
* consistent with a tada68 layout
* remove extra layer, add swap keycodes and mouse keycodes
* fix the tabs and spaces
* fix the left shift
* move kbd67mkiirgb into kbd67 directory as mkiirgb
* rename files
* rename LAYOUT to LAYOUT_65_ansi_blocker
* add support for default layout
* update readme for new build target
* update parent readme with the fourth variant
* rename LAYOUT to LAYOUT_65_blocker_ansi
* rename LAYOUT macro
* enable LAYOUT_65_blocker_ansi community layout support and remove uneeded lines of code
* rename LAYOUT to LAYOUT_65_blocker_ansi
* rename LAYOUT macro
* enable LAYOUT_65_blocker_ansi community layout support
* enable LAYOUT_65_blocker_ansi support
* fix rename mess up
* add QMK Configurator support with the new rename
* rename blocker_ansi to ansi_blocker as it rolls off the tongue easier
* move canoe into percent directory
* update readme for new make path
* move skog into percent directory
* update readme for new path and new instructions
* update readme
* fix error in naming
* Added ottodokto keymaps for dz60 and tmo50.
* moved placement of keymaps to proper directory
* fixed accidental deletion of semicolon for tmo50 map
* fix to use short form codes
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* move caps lock led to keyboard level so even QMK Configurator users have access to it
* set bootloader correctly to atmel-dfu
* clean up extra carriage return
* convert codebase to #pragma once
* fix file includes
- quantum.h is included at keyboard level, redundant at revision level
- keyboard-level path is accessible at revision level, remove relative pathing
* duplicate common layout macros from rev1 to rev2
Add the layout macros supported by both rev1 and rev2 to rev2.h directly, which exposes these layouts to QMK Configurator.
* enable community layout support (75_ansi, 75_iso)
* add LAYOUT_75_iso layout data
It needs its own tree because its keys are in a different order from LAYOUT_iso_1u even though the physical layout is the same.
* minimize rules.mk files (use QMK defaults)
* use atmel-dfu bootloader rule
* fix typo on rev1 info.json
* making a new board setup for ymdk bface clone
* removing extra keymaps that copied over
* documentation and edits for new ymdk_bface board
* cleaning up config and keymaps
* removed extra keymap and working on READMEs
* readme edits
* shorter aliexpress link in ymdk_bface readme
* added images to readmes and edited the keymaps
* more flashing directions
* Mac directions formatting
* editing and creating the all layout
* cleanign up ymdk_bface keymaps
* fixed typos in layout
* removed tabs
* cleaned up the LED and Backlight configuration.
* adding more to info.josn and cleaning up readme
* fixing JSON typos
* made a ymdk folder and moved the bface into it.
* fixing file names for the new folder structure
* Added Xerpocalypse's layout
+ Number row and symbols are switched compared to default TMO50 layout
+ Right-hand spacebar acts as backspace and a hold-layer for layer 2.
* Update keyboards/tmo50/keymaps/xerpocalypse/keymap.c
Removed unnecessary #define
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/tmo50/keymaps/xerpocalypse/keymap.c
Changed keymap to use KC_UNDS instead of custom-defined keycode
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* get rid of custom matrix that is no longer being used
* remove _kc LAYOUT
* remove ifdefs and replace with pragma once
* cleanup rules and use bootmagic lite
* get rid of led.c
* Update keyboards/alps64/alps64.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* remove unneeded configurations
* Fix Planck default keymap to play sounds on rev6
The dip_switch_update callback was overriding the default startup sound. This should prevent that from happening, and still allow it to play sounds, or stop them, when appropriate.
* Fix Preonic default keymap to play sounds on Rev 3
The dip_switch_update callback was overriding the default startup sound. This should prevent that from happening, and still allow it to play sounds, or stop them, when appropriate.
It was sending a comma keypress, while I believe that the targeted
stenography software (at least on systems that generally use
US-International keyboard layout) expects a single-quote/apostrophe key.
* adding working 2key2crawl
Adding working 2key2crawl files
edited files in accordance with original PR comments
* Changes
Changes and updates
* Update readme.md
* Update config.h
removed IS_COMMAND block that was missed in previous commit
* Changes to vol/keymap.c
Removed unneccesary function
* adding a custom mf68 keymap
* added custom tada68 keymap
* readme edit on tada68 map
* added mac fast-forward and rewind keybindings to tada68 emdarcher keymap
* tada68 keymap documentation and edits
* cleanup and edits
* typo fix in emdarcher's tada68 keymap
* cleaning up emdarcher keymap for tada68
* cleaned up emdarcher keymap for mf68
* Added new 2x5 Keypad with 3 LEDs to indicate the selected layer. By Jonathan Cameron.
* Minor refactor from suggestions from qmk team
* Added
* Moved to 'handwired' directory
* Update readme.md
* Update readme.md
* Update readme.md
* Update keyboards/handwired/2x5keypad/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Switch to image offsite
* Moved image offsite
* Update keyboards/handwired/2x5keypad/keymaps/default/keymap.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/2x5keypad/2x5keypad.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Moved functions into .c file per suggestions
* Cosmetic
* Fixed function called, per suggestions.
* Update keyboards/handwired/2x5keypad/2x5keypad.h
Ok
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Moved LED functions to the top level since they can be used it various flavors
* Declare those moved LED functions!
* Update keyboards/handwired/2x5keypad/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
The E6.5 is the new 65% keyboard made by Exclusive.
This changeset adds its PCB to QMK, including all the bottom row
variants and iso/ansi/split BS layouts.
* add dp60 keyboard
* fixup wording in readme
* fix layout name in default keymap. I was missing an r
* Add QMK Configurator support for the additional layouts
* Update keyboards/dp60/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/dp60/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/dp60/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/dp60/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/dp60/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* strip out the VIA enabling from default rules.mk
* add a VIA only keymap
* Add Rabbit68 Keyboard w/ default,kaiec keymaps.
* Requested changes by @fauxpark
* Change flash command, as suggested by @drashna
* Update keyboards/rabbit/rabbit68/readme.md
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Add link to Github repo
As I per suggestion changed the link above to an image, I added now the link to the project page to the Open Source text, where it actually makes the most sense.
* change LAYOUT_ANSI to LAYOUT_60_ansi
* change QMK Configurator layout to LAYOUT_60_ansi as well
* add 60_ansi support so I can make my userspace =)
* update readme
* Very strange. ISO keymap is still using 60_ansi LAYOUT macro. But then again....no ISO hottswap dz60 has been released
* UT47.2 keymap/updates for Planck style layout switching
* UT47.2 keymap for Planck-style layout switching / code clean up
* UT47.2 keymap for Planck-style layout switching: Qwerty, Workman, Colemak, Colemak Mod-DH, and Dvorak added / code clean up
* Change the layout info to match the keymap
* Edit readme to contain relevant info for layout switching
* Edit readme to contain relevant info for layout switching
* Edit readme to contain relevant info for layout switching
* Edit readme to contain relevant info for layout switching. Add QMK Configurator file.
* Update readme.md with make information
* Undo breaking change in config.h
* Code cleanup
* Code cleanup
* Code cleanup
* More code cleanup
* Turn off more unnecessary features by default
* Double TAP_CODE_DELAY due to more media key issues
Even with this change, some of the rotary encoder turns on my BDN9's
volume knob still seem to get dropped. It's possible there's something
wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes
QMK to miss an encoder turn? Unclear.) The other knob (backlight
brightness) works fine, FWIW....
* Restructure userspace config.h a bit
* Hack around Instant60 Via EEPROM conflict
Remove this when #6589 is fixed for Via boards.
* Add backlight breathing and (EEPROM) reset to BDN9
* Add keymap for 9-Key macropad
* Add a quefrency keymap
* New Alt-ernate layouts
* Enable Per Key Tapping Term to preserve sanity
* Use underglow and mod lights for status on Corne
* Update the drashna_ms keymap for quefrency
* Disable Audio since there isn't enough space
* Update KC_MAKE to ues :flash target
* Cleanup ergodox layout
* Enable i2c support for Iris
* Add keymap support for CG_SWAP
* Enable RGB Matrix Shutdown mode
* enable heatmap
* Update gitlab CI to install python3
* Remove game macros
These are no longer needed, and haven't been used in ages
* Cleanup planck layout
* Add RGB Matrix fun and RGB cleanup
* Add keycode and config for RGB Matrix idle animations
* Clean up rgb idle animation code
* Add rgb idle keycode to keymaps
* Fix issues with rgb matrix idle animation
* Fix some handling for idle animation
* Reduce idle animation timeout to 15s to be more reasonable
* fix up rgb stuff
* Fix isses with rgb functions not being called for matrix
* Use custom EEPROM Magic Number so testing is easier
* Extend Default Layer macro to support a lot more layers
* Fix bjohnson macropad
* Adjust KC_MAKE to process mods for more consistent behavior
* Fix up rgb stuff on corne
* Corne OLED Overhaul
* Fixes a number of issues with weirdness.
* Fixes issues with keylogger (should be more reliable now)
* Modulaize the OLED render sections
* Rewrite layer display code
* Update URL for Font Editor
Due to odd issues, I ended up rewriting from scratch. And using PROGMEM versions, since I think I was getting memory overflows.
* Update polling rate on all keebs
* Fix planck ez layout config
* Remove macros from Viterbi
* Update keymap.c
Additional functionality added to layers.
* Error fix
Fixed missing key in layer 5, fixed brightness keys with universal codes, made code more readable.
* fix missing commas
fixed missing commas on line 19 and line 23
* fix Indicator LED sticking on RGB off toggle.
fixes issue: LED indicators stay on when toggling RGB off
* fixup readme to adhere to QMK standards and to also have more information
* use pragma once
* strip out the custom bootmagic lite routine as it is the same as QMK's default bootmagic lite routine. Also add the caps lock led indicator
* turn on bootmagic lite
* update default keymap
* Update keyboards/playkbtw/ca66/ca66.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* remove lines 4 thru 37 and add bootloader
* Add missing void parameter declarations to *_light functions
* Add doro67/multi:konstantin keymap
* Allow FNLK to be canceled with Esc
* Function layer → Fn layer in keymap comments
Add spacing to LAYOUT macros, add layout comments, improve consistency, fix ISO layout bug
* Remove placeholder comments in regular.h and rgb.h
* Change K## to k## in multi.h and regular.h
* Add alignment whitespace in Doro67 LAYOUT macros
* Update multi default keymaps and add layout comments
* Update rgb default keymap and add layout comments
* Add RESET to Fn layer in multi default keymaps
* Replace KC_GESC with KC_ESC in rgb default keymap for consistency with other Doro keymaps
* Update regular default keymap and add layout comments
* WIP
* Replace odd F1, F2 with proper split LShift/Backspace keys in default_multi
* Minor fixes and tweaks in multi default keymaps
* Fix Enter and NUHS positions in multi LAYOUT_iso
* Return true in process_record_user in rgb default keymap
* Update Enter position in multi info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update labels in multi info.json to match the default keymaps
* Enable Fn layer tap dances only if LAYER_FN is defined
* Update KBD6X keymap spacing to match LAYOUT spacing
* Add regular FNLK to userspace, update keymap comment labels
* Rename KC_BRK → BREAK, KC_SYSR → SYSRQ in userspace
* Change mousekey positions in KBD6X
* Disable Console in KBD6X to reduce firmware size
* Return false in process_record_* only when overriding existing keys
* Fix Caps light not working after LSFT_FN
* Refactor Fn/Caps light, fix sequencing issues
* Add Dip Switches as a core feature
* Add documentation for Dip Switch feature
* Update Preonic Rev3 to use new feature and remove custom matrix
* Apply suggestions from code review
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Remove custom matrix line completely
Rather than just disabling it
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* DIP changes
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Use better check for DIP Switch configuration
* Add to show features
* Add bitmask callback for dip switch
* Fix OLKB Boards dip switch config
* Update docs to include bitmask example
* Fix comments/documentation
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fix issues with docs and use example from @tuzonghua
* Fix wording
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fix example to use proper formatting
Bad, BAAAAAAD drashna!!!
* Handle dip switch initialization better
* update codebase to four-space indent
* update codebase to use #pragma once
* refactor config.h
* change info.json to debug linting
* refactor readme
- file header
- update docs links
* minimize and lint rules.mk
* change features
- enable mousekeys and nkro
* use GPIO commands for Status LED
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* use IS_LED_ON macro
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* update compile/flash examples in readme
* :flash doesn't use QMK Toolbox
* added personal CTRL keymap
* added personal dz60rgb keymap
* enabled new rgb effect
* added space cadet shift
* media player track buttons now orange
* updated keymaps with rgb setting and visual HSV setting preview
* fixed source stuff?
* added support for underglow toggle (bugged to all hell)
* everything now behaves as expected when ti comes to RGB toggles, thank god
* removed ifdefs
* changed color of MAS_CRM
* uh, whitespace
* changed rgb positions and modifiers within RGB matrix thing for CTRL and DZ60RGB
* updated keymap to work kindof
* KEYMAP: changed list of rgb effects
* changed CTRL rgb defaults
* KEYMAP: new LED layout for ctrl
* fixed white LED position in indicator
* changed capslock tap timing
* Added new keymap - dz68rgb
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Fixed pin for RGB
* Added support for second revision of vitamins included
* Added rev2 config and switched to #pragma once
* Switch to quantum.h pincontrol
* Fixed left-half check
* Moved revision agnostic code to main header file
* Moved common build options to main makefile
* Referred to rev2 documentation
* JTAG is dissabled in keyboard.c now
* moved EEHANDS to rev1 config
* moved rev2 to use split_common
* Updated default keymaps
* Changed handedness ifdef to allow user-overrides
* Add some space saving defines
* Changed to more sane I2C clock
* Removed rev2 check in matrix.c as rev2 uses split_common
* Removed rev2 check in rev1 only code
* Update debounce constant name
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Switch KEYMAP macro to LAYOUT
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Switch kc_keymap macro to layout_kc
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Switch kc_keymap macro to layout_kc
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Add legacy layout macro alias
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/vitamins_included/rev2/config.h
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Split readme into revision specific versions
* Updated src to allow LTO
* Renamed readmes to lower-case
* Switched my keyboards to FEED VID
* Fixed markdown lint errors
* fixed readme links
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Maintain keymap backwards compatibility
Co-Authored-By: Joel Challis <git@zvecr.com>
* Switch Quefrency back to I2C (#6161 fixes the lag)
* Update Quefrency keymap
* Add reset and EEPROM reset keybindings so these tasks can be performed
separately, rather than relying on Bootmagic Lite, which performs both
tasks at the same time.
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Update KBD67 keymap
* Add reset and EEPROM reset keybindings so these tasks can be performed
separately, rather than relying on Bootmagic Lite, which performs both
tasks at the same time.
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Move Menu to a layer tap on the Fn key since that's a more natural
location.
* Update 60% Tsangan HHKB layout
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Update 60% ANSI split backspace/right-shift layout
* Add reset and EEPROM reset keybindings so these tasks can be performed
separately, rather than relying on Bootmagic Lite, which performs both
tasks at the same time.
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Update atreus to current code conventions - add multi revision instead of defines
* Remove config.h duplication from user keymaps
* Add breaking change log
* Add missing pragma once
* Branch point for 2019 Aug 30 Breaking Change
* LUFA USB descriptor cleanup (#4871)
* Fix indentation
* Fix braces
* Expand descriptor headers
* Align descriptor elements
* Nicer formatting
* Tidy up preprocessor statements
* Remove VERSION_BCD redefine - LUFA_VERSION_INTEGER is currently 0x170418
* Tidy up comments
* Tweak ordering of HID report elements (no functional changes)
* We don't need all of these newlines
* Move default USB_MAX_POWER_CONSUMPTION closer to where it makes sense
* Ask nicely
* Add some more comments
* Change indentation back to 4 spaces
* Add changelog entry
* Language Keymap extras backport from ZSA fork (#6198)
* Swedish extra keymap refactor
* Fix swedish $ sign definition (#81)
* Fix br abnt2 keymap compilation error
* Add PR changelog doc
* Update PR6198.md
* Enforce clang-format (#6293)
* Enforce clang-format on commit for core files
* forgot about tests
* Migrate ACTION_LAYER_MOMENTARYs to MO() (#5176)
* Migrate ACTION_LAYER_MOMENTARYs to MO()
* Add changelog entry
* Update docs/ChangeLog/20190830/PR5176.md
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Migrate ACTION_BACKLIGHT_* to BL_*
* Add changelog
* Update docs/ChangeLog/20190830/PR6299.md
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* default keymap fix for questionmark
Added /? to the default position for a qwerty keyboard. Moved |\ to the left ctrl with the same behaviour as before.
* Small PR adjustments and Keypad optimization
* Update keymap.c
* Update keymap.c
* Add 2015 revision of pegasus hoof to QMK
* Add different version strings
* Fix ansi tkl layout
- temporary JIS mapping, I can't test this as I don't have the hardware
* Reverse engineer JIS layout macro for 2015 Pegasus Hoof
* Linting on 2013.h
* Add more resources to readme
* Update keyboards/bpiphany/pegasushoof/2013/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/bpiphany/pegasushoof/2015/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/bpiphany/pegasushoof/readme.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/bpiphany/pegasushoof/readme.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Try to use core debouncing code
* return changed
* Use helpers
* initial commit
* Add the correct pins and ordering
* create an appropriate keymap macro for the board
* add an appropriate LAYOUT macro
* add a keymap that fits the LAYOUT layout macro
* add QMK Configurator support
* add missing pin D7 and LAYOUT_all
* fix my mistake when I added an extra key to the electrical matrix instead of the physical one
* add qmk configurator support for LAYOUT_all
* Update keyboards/eve/meteor/readme.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/eve/meteor/rules.mk
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* use the default names so BMC still works
* remove mcu rules as per resolution of 6253
* Layout with better use of navigation keys
* Update keyboards/tada68/keymaps/onelivesleft/config.h
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update Layer functions to use layer_state_t in ZSA Boards
* Update Music Mask for ZSA boards
Fixes an issue with the board getting stuck on Adjust layer when activating music mode
* Add Support for SMART LED Toggle to Planck EZ
* Add support for SMART LED toggle in Ergodox EZ
* Ifdef swiss cheeze for Oryx Configurator
* Documentation and updates
* Add Oryx Keymap
* Add option to configure the layers for the Layer Indicator
* Update keymap with better examples
* Make sure eeprom is initialized before reading from it
* Force flush of LED matrix when suspending board
This fixes an issue where the LEDs don't fully clear sometimes when the host system goes to sleep
* Enable RGB Sleeping by default
* Add clarification about planck ez led layer config
* Optimize RGB Matrix rendering for Ergodox EZ
* Optimize RGB Matrix rendering for Planck EZ
* Update keyboards/planck/ez/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
* Remove superfluous JTAG disable code
* 32A has differently named register
* Accidentally some operators
* 32A also has different JTAG pins
* Wrap disable_jtag() in an ifndef
* Document this new define
* Rename the define, it conflicts with a LUFA thing
Also, move the ifndef wrapping to the call in keyboard_setup()
* removed some debug prints
* removed unnecessary files, tweaked some things
* rotary encoder button now connected into column 0, row 3
* tweaked keymap and moved encoder control into keymap
* tweaks
* added test keymap
* updated some things to make it easier to work with QMK configurator
* updates after merging latest master in
* fixed a few things
* removed test keymap and all related #ifdefs
* changed some dumbpad default keys, added KC_LOCK
* added image to readme
* added link to PCB github repo
* moved lock key to the rotary encoder pushbutton
* making suggested changes from @fauxpark in https://github.com/qmk/qmk_firmware/pull/6452
* adding bootmagic lite since i'm lazy and haven't soldered on the reset button...
* renamed to
* using 7 underscores for KC_TRNS
* adding my layout (default is for wife)
* updated my own layout, tweaked default keymap to use cleaner switch for encoder control
* removed commented out import from imchipwood keymap, removed unnecessary comment from default layout
* added LED layer control
* flash the layer indicator LEDs at startup
* change layer_state_set_user to layer_state_set_kb
Co-Authored-By: Joel Challis <git@zvecr.com>
* in layer_state_set_kb, return layer_state_set_user
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* remove include of upper level config.h, add pragma once
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* changing default keymap slightly, added config.h for default layout
* change _delay_ms to wait_ms
* replaced locking numlock with numlock
* Update keyboards/dumbpad/dumbpad.c
change `keyboard_pre_init_user` to `keyboard_pre_init_kb`
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/dumbpad/dumbpad.c
adding `keyboard_pre_init_user()` to `keyboard_pre_init_kb()`
Co-Authored-By: Joel Challis <git@zvecr.com>
* fixed some comments about the layer key (MO to TT) and the SUB layer rotary encoder control
* Move default keymap's rules to keyboard level
* Concatenate the two sets of rules
This sets CONSOLE_ENABLE to no, which was being set at the keymap level.
* Wrap the USB Device Description in quotes
Some preventative maintenance. The firmware for the_ruler can't be compiled without this change if `CONSOLE_ENABLE = yes` because this string has a comma, which gets picked up as two arguments by the Command code, instead of one as it should be.
* Linting
- remove firmware size impacts
- remove trailing white space
- visual alignment of rules
* Use QMK's pre-loaded default rules for atmega32u4
* Update readme
- markdown formatting
- update Hardware Availability link (Maple Computing's site has disappeared)
- update Docs links
* Update header files to use #pragma once
* Add universal flash command
* Add bootloader info to I:C boards
* Add support for ATSAM
* Add messages for flash target
* Message cleanup
* Add USB ASP Flashing target
* Make usbasp target more universal
* Add phoney target for usbasp
* Clarify error message when bootloader isn't matched
* Fix Clueboard hotswap gen1 not compiling when LED Matrix is disabled
* Move keymap.json to default keymap folder
* Revert "Move keymap.json to default keymap folder"
This reverts commit 7f28df909d.
* Added Bulbizarre keymap for the XD75
* Fixed no newline at the end of file
* Update keyboards/xd75/keymaps/bulbizarre/readme.md
Co-Authored-By: MechMerlin <30334081+mechmerlin@users.noreply.github.com>
* Update led status check
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove unnecessary define
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* remove led layer code
* enable PWM on STM32F303
* Unusable PWM code
* Updated PWM Stuff?
* PWM Semi-working
* Both LEDs working at the same time
* Update names
* Add led level functions
* Add LED levels and persistent settings
* Revert change due to issues with timing related code
* Review feedback and minor cleanup
* add Userspace and keymaps
* Adding keymaps for zeal60 and iris
* Created my own tap dance that toggles RGB Mode based on whether I toggled caps lock or not
* parent 578ed42a7f
author Seth Barberee <seth.barberee@gmail.com> 1565065903 -0500
committer Seth Barberee <seth.barberee@gmail.com> 1565065903 -0500
move to userspace
add zeal60
* update based on review
* move userspace to github name
* Add Kudox Keyboard profile.
* Modified info.json and image link on readme.
* Remove unnecessary codes.
* Set BootLoader caterina.
* Remove duplicated settings on rules.mk.
* Clean up config.h.
* Modified include header path.
* Modified info.json to adjust 4th row keys y position.
* Separate default keymap and my keymap.
* Modified RGB_LED_* settings on kudox/rev1/config.h.
* Add configurations for Kudox Game Keyboard rev1.
* Modified Kudox Game Keyboard readme and keymap.
* Remove unnecessary codes.
* Set BootLoader caterina.
* Remove wrong settings on rules.mk.
* Clean up config.h.
* Modified MATRIX_ROWS on kudox_game/rev1/config.h.
* Modified RGB_LED_NUM on kudox_game/rev1/config.h.
* new keymap for projectkb alice
* update documentation for resetting PCB
* actually need a grave key more than a tilde
* move DFU_ARGS to top level
* cleanup unused keycodes and others
* align with typical ergo layouts. move enter and keep function layer reachable
* Delete null key
`__` key in keymap.c doesn't actually exist on the physical hardware.
Removed key from keymap.c and removed its argument from the layout macro.
* Delete unused keycode aliases
* Replace layer index definitions with an enum
* Replace redundant numpad keycodes with native aliases
* Use native layer change keycodes instead of aliases
* Visually align the keycodes
It makes the keymap pretty.
* Correct Configurator layout data
* Clean up header files
- convert to pragma once include guard
- remove redundant definitions
- remove commented code blocks
* Delete LAYOUT_kc macro
Was copied from ergotravel; not valid for this keyboard.
* Consolidate rev1 rules.mk settings to keyboard level
Previous codebase enabled Backlight at keyboard level then disabled it at revision level.
* Delete unused rules
* Consolidate config.h settings from keymap level to keyboard level
* Modernize keyboard's config.h file
Aligns the keyboard-level config.h file more closely with the current QMK template for AVR keyboards.
* Added nearly perfect config for AMJ66, only missing top right key.
* Correct the layout macro
* Add layout mock-up to amj66.h
* Update and comment out the backlight definitions in config.h
The backlight pin was found to be D4, but there appears to be a bug in QMK that affects this keyboard.
Commenting out for now.
* Try to make a sensible default keymap
* Add testing keymap for FSund
Include the keymap that was being used for testing.
Don't forget to refactor this later into an actually useful keymap.
* Suggestions by fauxpark
- uncomment the backlight configuration
- fix the default keymap
- remove commented MCU rule
- specify the bootloader
- make mental note to not try to write code at 3:30 in the morning
* Add LAYOUT_66_ansi and LAYOUT_66_iso macros
- include QMK Configurator data
- enable Community Layout support
* Add comments about layout variants to amj66.h
* Add #define BACKLIGHT_ON_STATE 1
Partial fix for backlight breathing.
- Requires #5983 to fix fully (confirmed by FSund and fauxpark)
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: Filip Sund <filip.sund@gmail.com>
* DEBOUNCING_DELAY -> DEBOUNCE
* Move AMJ66 files into new AMJKeyboard directory
* Correct Manufacturer in USB Device Descriptor
* Remove comment regarding source fork
* Correct the readme
* Update default keymap to match the details given in its readme
* White-space edit fsund_test keymap
Makes its formatting more consistent with other 66% keymaps. No logic changes.
* Linting info.json
Debug-style linting (one key object per line) and minor edits to key labels.
* Remove fsund_test keymap
* Add FSund as a maintainer in info.json
* removed some debug prints
* removed unnecessary files, tweaked some things
* rotary encoder button now connected into column 0, row 3
* tweaked keymap and moved encoder control into keymap
* tweaks
* added test keymap
* updated some things to make it easier to work with QMK configurator
* updates after merging latest master in
* fixed a few things
* removed test keymap and all related #ifdefs
* changed some dumbpad default keys, added KC_LOCK
* added image to readme
* added link to PCB github repo
* moved lock key to the rotary encoder pushbutton
* making suggested changes from @fauxpark in https://github.com/qmk/qmk_firmware/pull/6452
* adding bootmagic lite since i'm lazy and haven't soldered on the reset button...
* renamed to
* using 7 underscores for KC_TRNS
* personal keymap for the planck with sounds
* need that minus and underscore where I can see them
* remove unused block
* some, shall we call them, minor changes?
* I don't think this is required anymore
* initial commit TGR Jane
* lighting support
* use the default keymap lifted from community layouts for LAYOUT_tkl_ansi
* add information regarding reset key, hardware supported, and hardware availability
* document that it supports v1.1 as well thanks to nickheller's confirmation
* update some verbage in the readme
* add QMK Configurator support
* establish switch matrix for three main layouts
* add community layout support
* readme fixes
* Update keyboards/tgr/jane/info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/tgr/jane/rules.mk
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/tgr/jane/config.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update MODERN_DOLCH_RED color
* Remove unused RAL_LAL tap dance
* Disable Space Cadet on all boards
* Rework SEND_STRING_CLEAN into CLEAN_MODS, fix DST_P_R/DST_N_A
* Disable unnecessary underglow animations
* Rearrange feature flags in rules.mk files
* Change custom colors from structs to defines
* Add some explicit initializers
* Add MODERN_DOLCH_CYAN color
* Add IS_LAYER_ON_STATE()/IS_LAYER_OFF_STATE() macros
* Add led_set_keymap() template function
* Change underglow color based on Caps/Fn state
* Preserve val when changing underglow colors
* Only trigger Fn light for Fn layer
* Refactor fn_light() and caps_light() slightly
* Add comments to fn_light() and caps_light()
* Xulkal changes
Refactor rgb & encoder menu
Hadron Keymap
Refactor oled menu
* Fixing horizontal OLED data display
* Reverting changes to take to separate prs
* basic layout v1.0
* changed KC_TRNS to _______
* most symbols are on double tap, except quote, that was cancer
* better formatting and set toggle for game layer
* added colors to layers to make knowing your current layer easy
* have an empty macro working
* enabled unicode
* moved stuff to my folder and removed edits from communal files
* cleanup
* removed the game layer. Never used it
* made changes requested by drashna and vomindoraan
* got rid of some unnecessary code
* got very basic unicode on mac working
* added ctrl_esc
* more changes as requested by noroadsleft
* more leader additions, removed macros because leader stuff replaces that functionality
* removed an old macro I forgot to remove earlier
* final deletion at noroadsleft request
* changed a line to explicitly specify a purple color.
* Fix my Tap Dance issues after I broke them
* Cleanup and organization of userspace documentation
As well as some additional cleanup of functions due to review of documentation.
* Enable Tapdance on Glow and remove more animations
* Revert to Eager PR debouncing
* Add better check for startup animation
* Move where RGB Matrix defines are listed
* Limit RGB Matrix max val
* Update keyboard for Iris Rev 3 conflicts
* Enable encoder support on planck ez
* Remove is_master check from corne\'s OLED code
* Overhaul OLED screens for my Corne
* One last removal
* Show RGB valu On both sides
* Updates for OLED display info
* Fix compile issues for rgb config
* Disabled Space Cadet for all drashna keymaps
* Fix OLED Screen configs
* Minor OLED Tweaks
* Revert some Iris changes
* Fix song include
* Handle MAKE macro for the Corne boards better
* Add super hacky-hack for eeconfig initialization
* Add audio support for Fractal since Elite Cs support it
* Add defines for keycode steps
* Add White layout
* Update Corne RGB info
* Add fun effects to layer indication for RGB Matrix enabled boards
* Use proper define for product name detection
* Update formatting
* Use custom timeout mechanism for OLED timeout
* Fix up OLED screen HSV code for new HSV structure
* Better handle turning off RGB Matrix when sleeping
* Disable MultiSplash Animation
* Change Iris back to using serial
* Why was RGB disabled?!?!?!
* Limit val in rgb_matrix_layer_helper function
* Remove EECONFIG setting for RGB matrix
* Basic Rev 2 implementation
* Updated LED defines and added Extra encoder support
* Fixed rgb pin assignment
* Physically accurate LED positions
* Single Color Band scrolling left to right effects
* Spirals, Pinwheels, and Documentation....Oh My!
* Spiral effect band thickness adjustments
* Fixing animation spin directions
* Full hand LED positions
* Basic Rev 2 implementation
Updated LED defines and added Extra encoder support
Fixed rgb pin assignment
Physically accurate LED positions
Full hand LED positions
Moving rev2 folder
* RGB Center Point LED position update
* Fixing led config commas
* Fixing led config commas
* fix enter key
* fix enter
* Small changes to default
* update default
* typo fix
* update default
* Fixing defines & led config, turned full hand & extra encoders into rules.mk feature
* Refactored rules.mk to have a post_rules.mk
* Forgot to offset the matrix to led map due to the edge led additions
* Updated LED flags and fixed my keymap
* Update keymap.c
include speed controls for RGB
* Fixing more rules.mk and adding keymap like encoders functionality
* Sol Rev 2 Implementation
* Minor fixes
* Keymap fixes
* Fix Colemak, add lock keys
* fix default keymap to not have Q in the 1 position.
* add tsangan hhkb layout
* add a tsangan default keymap
* clean up the default keymap
* add qmk configurator support for new layout
* [Layout] KBP V60 Type R ISO default
* Remove ifdef
* Apply suggestions from code review
@noroadsleft I've accepted your suggestions. Tried locally any everything works as expected.
Thanks again - this if my first keyboard and first time looking at/ using/ contributing to qmk so I appreciate the feedback 👍
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
info.json file had the wrong name for the JSON key; the macro that is normally named LAYOUT_all by convention is named LAYOUT_60_all on the Zeal60.
Bug flagged by drashna for flight505 on QMK Discord.
* Update snagpad.h
White-space changes only. Making this file easier to read.
* Update info.json
Refactor:
- add labels
- debug linting (one key object per line)
- reorder keys for LAYOUT_numpad_5x4 (fixes QMK Configurator assigning keys to incorrect positions)
* Update readme.md
Refactor to conform to QMK template.
Updated link to The Board Podcast (old link was Error 404).
* Refactor splittest to support multiple dev boards
* Refactor splittest to support multiple dev boards - revert change to number of RGB led
* Refactor splittest to support multiple dev boards - update docs
* Refactor splittest to support multiple dev boards - correct docs
* Refactor splittest to support multiple dev boards - update teensy master logic
* Add Configurator layout data for LAYOUT_hotswap
* Add LAYOUT_std60_split_num0
Requested by 李小安#9728 on QMK Discord.
Standard 60% ANSI layout for the alphanumeric region, with a split-0 Numpad.
Includes a sample keymap.
* Update Docs links on readme
* Change melody96.h to use #pragma once include guard
* Change config.h to use #pragma once include guard
* Add readme for default_std60_split_num0 keymap
* Update x11.h
The original json file that was given by the designer was incorrect. The Print Screen and Pause button is swapped.
* Update space65.c
Fixing the Caps Lock LED.
* Revert "Update space65.c"
This reverts commit 1f5de1abae.
* Remove the need to set NUM_OF_ENCODERS
Instead, calculate the size of the array, and use that instead
* Add hack for split common support
* Remove NUM_OF_ENCODERS from keyboard config
Can be reverted, if needed
* Enable Mousekeys on Corne Keyboard by default
For Tessachka and Configurator support
* ENable for default image too
* Remove most of rules.mk for default keymap
* make sure rgblight is enabled by default
from default keymap
* Script to generate keymap.c from JSON file.
* Support for keymap.json
* Add a warning about the keymap.c getting overwritten.
* Fix keymap generating
* Install the python deps
* Flesh out more of the python environment
* Remove defunct json2keymap
* Style everything with yapf
* Polish up python support
* Hide json keymap.c into the .build dir
* Polish up qmk-compile-json
* Make milc work with positional arguments
* Fix a couple small things
* Fix some errors and make the CLI more understandable
* Make the qmk wrapper more robust
* Add basic QMK Doctor
* Clean up docstrings and flesh them out as needed
* remove unused compile_firmware() function
* Add support for XD004
Also applying the following suggested edits:
Add hardware availability link in readme
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Enable lite bootmagic
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Remove commented out MCU
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Add more ellaborate keymap
Correcting usage of tap_code_16 for modified key, thanks to @drashna
* Add information about bootloader type
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* add keyboard new macro pad "Kuro"
* change main readme.md
* remove not used code from default/keymap.c
* Remove unnecessary code
* Supports info.json
* removed back slash and not used functions.
* update at product link. add japanese messages.
* Added initial files for the Adron 3-key macro pad
* Refactor of "adron_pad" to "ivy", cleaned up the readme and removed un-needed keymap as well.
* Made suggested changes to commit for PR
* Removed unneeded define block from SUBPROJECT_rev1 as it is redundant (Thanks drashna ;) )
* Add missing TD_RSF_RCT tap dance
* Use standard QMK HSV and RGB structs, fix Godspeed colors
* Move PROGMEM after the type in RGB intervals
* Add MODERN_DOLCH_RED color, use it on KBD6X
* Use 255 instead of RGBLIGHT_LIMIT_VAL in color definitions
* Remove IS_COMMAND override on Whitefox
* added files for KeyHive Maypad
* updated maypad files and moved honeycomb inside keyhive dir
* fixed file paths, incorporated changes with fauxpark's suggestions, undid honeycomb move
* updated with fixes from PR
* added new lines to end of honeycomb files to fix compiling
* Updated info.json to match the macro name from maypad.h
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* reordered layout in info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* removed KEYMAP from maypad.h
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* removed extraneous keymap files
* pulled qmk/master for honeycomb
* added ortho_5x4 and keymap cleanup
* matched identities in maypad.h
* added bootmagic functionality to maypad
* changed bootmagic to lite
* added handwired keyboard wulkan
* added info.json for qmk configurator
* fixed spelling
* enum dont need to be assigned to zero
* removed cflag from readme
* updated rules.mk
* removed unneeded rows from config
* moved unicode to keymap conf
* fix adjust layer and comments for keymap
Using QUANTUM_LIB_SRC prevents the warning when multiple sources add the i2c_master.c file. Boards such as the Ergodox EZ Glow see this warning every time they compile because the board uses the file in general, and because the RGB LED Matrix requires it, as well.
* Add wasdat:konstantin keymap
TODO: Move it to layouts/
* Use HHKB arrow arrangement for mouse keys on KBD6X
* Move KC_APP from Ctrl to M on all boards
* Use RCT_RSF on Melody96
* Set TAP_HOLD_CAPS_DELAY to 50 in userspace
* Use RSF_RCT instead of RCT_RSF
* added iris rev 3 keymap
* stuff
* Update config.h
* Removed personal mapping folder so that I can branch it
* Added personal Iris keymap folder
* added enums, removed break after return, and removed line 3 of keymap.c
* removed process record function
* greenshadowmaker keymap for idobo xd75 massdrop
* remove uneeded config.h
* corrected format to match convention instead of xd75 where I accidentally started from
* fixed errors and added arrows bottom right to match my other layouts
* updated readme
* right arrow fix
* Update keyboards/idobo/keymaps/greenshadowmaker/keymap.c
removing unnecessary part, copied from different keymap
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* added suggested changes
* removed unneded elements
* updates to my iris keymap
* some rational updates to the keymap - let's see how this works
* updates to my iris keymap
* some rational updates to the keymap - let's see how this works
* add mouse keys and remove unused keys and some cleanup
* a little bit more cleanup
* actually enable mousekeys
* fix markdown lint complaints
* fix capitalization
* changes made per suggestions
* initial commit, copied from singa
* default 60_ansi LAYOUT implemented and tested workin
* add rgb underglow support bounded by ifdefs
* edit readme to provide information on reset procedure and on rgb underglow support
* improve the default keymap to have a second layer with function keys and even a RESET
* Add LAYOUT_all macro and discovered that split backspace uses an additional pin on the microcontroller
* fix up last line in readme
* Add QMK Configurator support
* Convert gh60.h to #pragma once include guard
* Lint gh60.h
This commit only changes white space.
* Convert info.json to debug linting
Making this file easier to read.
* Put the label keys first for LAYOUT_60_ansi
* Complete and correct key labels in info.json
* Duplicate LAYOUT as LAYOUT_all
Doing this for backwards compatibility. Has implications for user keymaps.
* Update LAYOUT_all to make sense
The original macro LAYOUT submitted for the GH60 gets a couple of things wrong:
- K49 is placed between Space and Right Alt, when it's actually the right half of a split Backspace
- K3C is assigned before K3D, when K3C is the 1u portion of a 1.75u/1u split Right Shift, and therefore K3D is actually to the left of K3C
The LAYOUT_all macro corrects these issues, but the LAYOUT macro is unchanged, so as to not break user keymaps that depend on it.
This commit also updates the default keymap to use the LAYOUT_all macro, and makes a minor change to the base layer to be more as a user would expect for the corresponding physical layout.
* Correct the layout data for the LAYOUT macro in info.json
Gives proper Configurator rendering.
* Modernize default keymap
Update the default keymap to use more modern QMK conventions.
* Modernize the LED management code
Update the LED management functions to use the GPIO functions, and clean up the led_set_kb() function.
* Update key labels in info.json for LAYOUT_60_ansi_split_rshift
Makes them consistent with the the rest of the file.
* Update Docs links in readme file
* Snowkuma's planck layout.
Heavily influenced by both Planck and SDOTHUMs layouts. I have tried to
implement a comfortable layout with a wide stagger and a minimal set of
key usage.
Still a work in progress, hope it is useful to others.
* Adds simple readme file and images of layout
* Removes unused experimental definitions
* Update readme.md
Adds images of layout to readme.
* Removes accidentally added test keymap .swn .swo .swp files
* Updates config.h replaces include guard
As suggested by @noroadsleft replaces the include guard (ifndef, define
and endif) with just `#pragma once`.
* Replaces two extra KC with inbuilt QMK equivalents
custom_keycodes.h
Replaces `___f___` with the equivalent QMK alias `_______` KC_TRNS
`___x___` with the equivalent QMK alias `XXXXXXX` KC_NO
Updates keymap.c to reflect the changes made.
* Changes keymap.c to include QMK_KEYBOARD_H
Replaces planck.h and action_layer.h includes with the single inclusion
of QMK_KEYBOARD_H which includes action_layer.h automatically.
* Update keyboards/planck/keymaps/snowkuma/keymap.c
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keymap.c
removes unused Coleman key code from enum planck_keycodes
* Update keymap.c removes COLEMAK key code logic
* Initial keymapping
* Removed unneccessary config files
* Update readme.md
* Updated symbol locations, tap dance on parentheses for brackets.
* Update readme.md
* Fixed layout image inconsistencies
* More quality shift key layer control, swapped enter + shift enter
* Keyap tweaks and config cleanup
* Almost compiling, still has layout reference issues.
* Finally compiling. 2x2u layout (default, not mine) had nonexistent keys on it
* Super minor changes
* Ctrl+Bksp after first tap
* Changed bind so un/lock is explicit to work with remote un/locking
* Added keyboard passwords please don't hate me
* Changed backspace functionality and added em dash
* Changed to send_string because it's preferred for macros
* Minor fixes
* Removed global redefinition and fixed possible issue between 6KRO and NKRO
* Cleanup
* Layer names, password layer is OSL over toggle
* Hopefully now in QMK preferred format.
* Blank passwords.c
I realized with me excluding this it wouldn't compile - so adding a blank one.
* Fixed OSLs not cancelling after tapping term
* Matrix change.
KC_NO instead of repeating.
* Unneeded line.
Co-Authored-By: IsaacElenbaas <34344969+IsaacElenbaas@users.noreply.github.com>
* Fixed return statements to work with after-press functions
* External image host
* Removed image from github
* Removed unneccessary rules.mk lines and fixed tabbing
* Typos
* Fixes upon part arrival.
* Final changes and bug fixes
* Preventing KC_NO from waking monitors.
* Fix to rest of matrices
In response to https://github.com/evillemez/qmk_firmware/issues/1—the rest have the same problem.
The switch of k37 for k36 is just for consistency between that and the 2x2u.
* Workaround for #6214, minor changes, CRLF change in passwords because it won't leave my modified no matter what I do.
* Add Pulse 4k, a macropad by Maxr1998
* Some config tweaks
* Remove image note
* Add license headers
* Fix media keys
* Remove Play/pause again as it doesn't work on Linux
* Initial refactor of onekey to support multiple development boards
* Fixes to get teensy lc && 3.2 working
* Add pin tables
* Add caveats to Teensy boards
* Correct bootloader for Elite-C
* [Keyboard] Modernize the KMAC implementation
This brings the matrix implementation more in line with the current
default matrix code.
It also simplifies the implementation quite a bit.
* [Keyboard] Add layout support to KMAC
* Rename layout macros
The Instant60's info.json was updated in #6157. The intention seems to have been supporting Community Layouts, but that feature was not implemented. After checking that the layouts conform, rename the appropriate layout macros.
- rename LAYOUT_ansi as LAYOUT_60_ansi
- rename LAYOUT_tsangan as LAYOUT_60_tsangan_hhkb
- update `default` and `tsangan` keymaps
* Enable Community Layout support
Supported Community Layouts:
- 60_ansi (Instant60 ANSI version)
- 60_tsangan_hhkb (Instant60 Tsangan version)
* keymap simplification and fancy alt tab behaviour
* move symbols around and try ergo numbers
* mess with symbol positions
* f11 and f12 for volume control (for ease of remapping)
* slack unread navigation
* experiment with mods on home row
* mods on symbol layer
* dedicated tab left and tab right keys
* swap next and prev
* remove hold to shift on a and o
* revert to simpler keymap
* restore readme
* point to keymap image
* cmd + cmd -> cmd + ctrl
* expand readme
* slack unread channel navigation
* Update keyboards/planck/keymaps/callum/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* return true from cmd handling block
* [keyboard] TA-65 by maartenwut
Add ta65 to QMK with 4 layouts
* Simplify config.h
* Simplify keymap
* Update bootloader
- confirmed to be qmk-dfu by maartenwut
* Update keyboards/ta65/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Review feedback
- fauxpark recommendations
- noroadsleft recommendations
* Repair info.json structure
JSON objects were not properly nested according to the QMK specification.
* Switch info.json to "debug linting"
So I can read the file more easily.
* Remove k2c and k31 from LAYOUT_tsangan
k2c was the Non-US Hash position, and k31 was the Non-US Backslash position, but this layout is intended for ANSI.
* Correct LAYOUT_tsangan data in info.json
* Update tsangan keymap to use updated LAYOUT_tsangan macro correctly
* Rename LAYOUT_tsangan to LAYOUT_ansi_tsangan
Increased clarity.
* Rename tsangan keymap as default_ansi_tsangan
Per QMK Keyboard Guidelines.
* Fix object ordering for ISO layouts in info.json
ISO Enter's object was out of sequence in both layouts.
* Rename ISO keymaps per QMK Keyboard Guidelines
- rename iso keymap as default_iso
- rename iso_tsangan keymap as default_iso_tsangan
* Add default_ansi keymap
For user reference.
* Enable Community Layout support
LAYOUT_ansi and LAYOUT_iso conform to the 65_ansi and 65_iso Community Layouts, respectively.
- rename LAYOUT_ansi to LAYOUT_65_ansi
- rename LAYOUT_iso to LAYOUT_65_iso
- update keymaps as appropriate
- add LAYOUTS rule to rules.mk
* Disambiguate key labels in info.json
* Remove trailing white space from info.json
* Update keyboards/ta65/keymaps/maartenwut/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Add omnikeyish keyboard support.
* remove out of date comment
* PCB Rev 1.1 moved Row5's pin to E6, because the teensy++ hangs an onboard LED off D6.
* Move string.h include to .c file
* Add pcb kicad link.
* Add info.json
* Move macro programming to numlock's keyposition, the most useless key on the post model M layout. Force numlock enabled on host at init time, so you're not stuck without a numpad (hopefully)
* Make the macro blink function toggle LEDs from their previous state.
* Use incorrect but code style compliant opening curly bracing style.
* Make PCB rev 1.1 the default Omnikeyish config, as the author has the only rev 1.0 boards that'll ever be.
* Fix silly spelling error in 3 defines
* First set of review changes.
* Layout macro and keymap defined using it.
* Layout macros for the northgate factory plates.
* minor rearrangements
* ALL the layouts.
* Forgot ultra-t in info.json
* fixed issue with LED indicators
corrected error in info.json
* fixed issue with led indictors
* added fix for key_count to info.json for westfoxtrot/aanzee
* fix to support config.qmk.fm correctly and remove unused key from matrix for westfoxtrot/aanzee
* fix for caps_lock led
* Update readme.md
* Move layout macros to revision folders
* Update Planck EZ layout macros
Planck EZ only supports one layout (centered 2u spacebar). Deleted all the other macros.
* Flesh out QMK Configurator support
Give each Planck revision its own info.json file.
* Readme updates
- give each revision its own readme
- add the Planck EZ to the main Planck readme
* Fix layout macro for Planck EZ
Previous matrix didn't compile because the electrical matrix defined a k3b location, which was unused by the physical arguments.
Drashna was kind enough to confirm the Planck EZ's matrix for me.
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Pretend the Planck EZ supports ortho_4x12 layout
The hardware doesn't, but doing so prevents CI errors because the default keymap uses LAYOUT_planck_grid.
Going to pretend LAYOUT_ortho_4x12 is a valid layout for the Planck EZ.
* Update Planck EZ's URL in info.json
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* added keyboard_layout_jopr
* making it compile
* #pragma once instead of #ifndef and #define
* renamed and added keymap
renamed old "default" to "modded_white", added new "default" that resembles an ISO 105-key layout
* reordered keyboards/jopr/info.json to match order o layout array
* implemented most suggestions
* fixed missing ;
* fixed bootloader setting for rules.mk
* adopted standard layout matrix naming convention
* "fixed" commented-out code in keymaps
* changes to keymap layers and LEDs
Turns out adding a layer for ROYA-modified keycodes is more trouble than it's worth and works better by just defining a ROYA key.
Also, LEDs were set up incorrectly.
Lastly, implemented SysReq-Warning LED.
* moved forced NumLock code
just in case either it or the CapsLock & ScrlLock update code wouldn't both work otherwise
* rearranged media keycodes
* replaced Shifted keycodes with basic ones
* Apply suggestions from code review
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* implemented suggestions by noroadsleft
* Apply suggestions from code review
Make ISO-Enter QMK Configurator-friendly
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update readme.md
* Update keyboards/jopr/info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* moved keyboard to handwired folder
It was said that personal passion projects belong in there, even if they're not actually handwired
* Update readme.md
* added personal CTRL keymap
* added personal dz60rgb keymap
* enabled new rgb effect
* added space cadet shift
* media player track buttons now orange
* updated keymaps with rgb setting and visual HSV setting preview
* fixed source stuff?
* added support for underglow toggle (bugged to all hell)
* everything now behaves as expected when ti comes to RGB toggles, thank god
* removed ifdefs
* changed color of MAS_CRM
* uh, whitespace
* changed rgb positions and modifiers within RGB matrix thing for CTRL and DZ60RGB
* updated keymap to work kindof
* KEYMAP: changed list of rgb effects
* changed CTRL rgb defaults
* KEYMAP: new LED layout for ctrl
* fixed white LED position in indicator
* changed capslock tap timing
* new keymap for the hasu with media keys and mac layout
* switch escape and grave
* switch to the usual default
* with play and stop
* add reset on fn layer
* add mouse buttons, move reset, update copyright
* changes to keymaps
* changes to userspace
* changes to userspace
* removed reference to fc660c keymap which no longer exists from userspace readme
* removed preonic keymap
* Fix typo for RGBLIGHT config values
It doesn't make a difference right now since these are the defaults in
rgblight.h (which I'm just setting explicitly since some of the keyboard
configs change these defaults). However, I'd rather be explicit, so
fixing my typo. :)
* Remove mouse keys layer from Quefrency keymap
It's a fun idea, but I never use it in practice.
* Planck: layout macro refactor
Unified layout macro names across AVR and ARM boards.
Currently certain layout macros are specific to either AVR or ARM when used in the QMK Configurator. If an AVR-specific macro is used for a Planck rev. 6, or an ARM-specific macro on a rev. 5 or earlier, the user receives a compile error.
* Update keyboards/planck/planck.h per @drashna
Changed KC_LAYOUT_ortho_4x12 alias to LAYOUT_kc_ortho_4x12.
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Add KC_KEYMAP alias for LAYOUT_kc macro
per @drashna
Update keyboards/planck/planck.h
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Fix LAYOUT_planck_1x2uC macro for Planck rev6
Thanks to drashna for testing.
* Fix inline comment regarding revisions
* Add specific info.json file for Planck rev6
* Adding led support for Plaid
* Adding led support for Plaid
* Update readme.md
Fixing bad markdown
* Adding my personal keymap
* Clarifying LED instructions / formatting
* Add vlukash CrKbd keymap to support trackpad adapter.
The trackpad adapter uses Elite-C board that has five extra pins.
Also SPI pins are taken for trackpad, keymap config updates column data
pins for matrix scan.
* Update vlukash keymap
* Enable pointing devide, configure mouse BTN1
* Set TAPPING_TERM to 300
* Add support for the BlackBerry 8520 trackpad
* Add vlukash keymap for master-right no-trackpad version
* Remap backspace
* Set EXTRAKEY_ENABLE = yes
* Update thumb keys mappings
* Set bootloader to atmel-dfu
* Sync keymap
* Add scrolling support
* Make debug LEDS conditional
* Add support for both flex and no-flex PCBs
* Add readme and rename root folders
* Update readme file with blog link
* Fix readme file formatting
* Remove ADJUST keycode, code cleanup.
* Add Win key to the keymap.
* add calbatr0ss dz60 layout
* add media controls
* add media next/prev controls
* add base layer for windows and macos
* swap right ctrl and menu
* missing bracket
* update gitignore
* niu_mini uses dfu bootloader rather than the afrdude bootloader
modified: readme.md
* Change rules in rules.mk to reflect the bootloader change
modified: keyboards/niu_mini/rules.mk
