* Write firmware for the Ferris keyboard
Took inspiration from the gergoplex and the ergodox_ez firmware for the
split matrix with io_expander on the right hand.
Cleaned up a lot of bit fiddling on the mcu side by taking inspiration
from the `split_custom` in quantum.
Still bit fiddling on the mcp side as it is particularly natural to do
so with the abstractions provided by the i2c protocol. Would be good to
clean that up and abstract away the wiring from the generic i2c code in
a similar fashion as quantum and the mcp side behave.
One improvement over the ergodox_ez and the gergoplex firmwares is that
the wiring is straight forward as opposed to swapping rows and columns
in two different places that end up cancelling out for some reason.
At this stage, I have flashed this firmware to a board and have verified
that all keys are behaving as intended by shorting pins.
I still have to solder in some switches and test that everything works
correctly at normal typing speeds, but I don't expect any major issues
given I'm building up on previous effort, including the debouncing code
from the ergodox_ez.
* Remove rotation from info.json and label the keys as per default keymap
* Comply with minor review feedback points
* Use CUSTOM_MATRIX=lite to remove boilerplate
* Update keyboards/handwired/ferris/info.json
Didn't play nicely in the configurator
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove MIDI_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove FAUXCLICKY_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Prefer wait_ms over _delay_ms
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused includeh
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use dprint over print and remove include for print.h
* Remove all unused includes
* Remove unused code
* Cleanups thanks to code review
* Move more personal settings from the ferris config to the default keymap config
These setting happen to be unused in the default keymap at the moment,
as it has only one layer with no homerow modifiers and no mouse key; but
I would like to keep it there for two reasons:
* It can serve as an example to people creating their own keymap
* I plan to design a more usable default keymap that uses these features
once this PR which adds the Ferris keyboard is merged.
* Consolidate mcp logic inside matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* readded adelheid files
* reworked keymaps
- moved my personal keymap to a new folder
- added a new default keymap
* removed unnecessary backslash
* reenabled command rule
* bumped device number
* fixed layout for configurator
* applied suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821.
* Add Alter keyboard
* Fixed keymap.c
* Fixed another issue on the keymap.c
* Updated the files based on the comments
* Edited default keymap and enabled rgbanimations on config.h
* Updated the info.json
* via support for the skog lite
* some code cleanup before submission
* Update keyboards/percent/skog_lite/keymaps/via/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/percent/skog_lite/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update info.json
* Update keyboards/kbdfans/maja/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kbdfans/maja/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* update keymap
* update ilpse template as well
* fix some key items
* move quote the first layer
* figure out brackets
* update ilpse keymap
* update arrow keys on alice
* change layers
* update layers again
* switch to vim keys
* add mouse keys
Co-authored-by: Khader Syed <khader.syed@aicure.com>
- Fix typo in the default layout.
- Move esc and del to the navi layer.
- Fix issue with oneshot layers and double tap aka DBL_TAP.
- Add caps lock to the raise layer.
Was relying on a broken behavior for the double tap to work with
oneshot keys, i.e. the oneshot layer not being cleared after a key
press in `process_record_user`, which allowed me to first press an
oneshot key, then double tap and then a key. With the behavior fixed,
this no longer works. As the oneshot layer will be cleared when double
tap is pressed.
To make double tap useful again. I changed that any of the layer keys
does not clear the double tap. Which allows me for example to first
press double tap, then an oneshot key and then a key. So now I'm able
to type my double symbols again.
* Re-enable mouse keys to fix Chrome OS media keys
I'm not sure if there's a bug in Chrome OS, QMK, or both, but
EXTRAKEY_ENABLE isn't sufficient for media keys to work on Chrome OS.
Instead, MOUSEKEY_ENABLE is also required.
* Remove unnecessary SPLIT_USB_DETECT for Lily58
I've since swapped my Lily58 back to Elite-C v2 controllers with working
VBUS detection.
* Move Crkbd Esc and Ctrl keys; add some shortcuts
* Move MC_ALTT to userspace for cross-board support
* Sync Lily58 keymap with Crkbd
* Fix typos
* Added Handwired Redragon Keyboard as well as default and via keymaps
* Update keyboards/handwired/boss566y/redragon_vara/info.json
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/boss566y/redragon_vara/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keymap.c
Removed defined keycodes from via keymap
* Update keymap.c
replaced defined keycodes in default keymap
* Update readme.md
Changed image to one that matches the physical keyboard
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add support for YDKB Chili
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Updated VIA Support
- Added LAYOUT_all Support for VIA compatibility
- Updated default dp60\layouts\via\keymap.c to mmirror changes to
LAYOUT_all
- Rules.mk updated in both base and via directories.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
Co-authored-by: Will <wailinnyu@gmail.com>
Co-authored-by: Andrew Koh <andrew@springlabs.com>
Apparently VIA allocates bits in the layout options field from the
lowest bit, but starting from the **last** option defined in the JSON
file. So the default value 0x06 was actually trying to set the value
`3` (`0b11`) for the second-to-last option ("Right Shift"), which had
only 3 values defined, and the attempt to set an undefined option value
caused the VIA app to hang with a black window.
Fix the default layout options so that it works as intended (the
"Macropad" and "65% Column" options are set).
* Started AHK Companion Development
* Updated the readme
* Added AutoHotKey companion file
* Updated documentation
* Cleaned up the files and revised documentation
* Finished the readme.md updates
* Fixed the LED issue where the last LED did not reflect the right color
* Adding VIA support for 40percentclub/luddite
* Update config.h
* Update rules.mk
* Delete config.h
config.h was created to override the "default" of RGBLED_NUM 8
deleting the file to keep with defaults
* Removing block and comment as suggested
* Update PRODUCT_ID
Changing from:
#define PRODUCT_ID 0x0A0C
To:
#define PRODUCT_ID 0x4C55 // "LU"
* Changing Vendor ID
Changing Vendor ID from:
#define VENDOR_ID 0xFEED
To:
#define VENDOR_ID 0x3430 // "40"
* Adding VIA support to cannonkeys/practice60
Adding VIA support to cannonkeys/practice60
* updated VENDOR_ID to match other CannonKeys boards
* changed PRODUCT_ID to be unique
* added additional notes to readme.md
* keymap.c and config.h for VIA support
* Update readme.md
* Update keyboards/cannonkeys/practice60/readme.md
* Update keyboards/cannonkeys/practice60/readme.md
* Update keyboards/cannonkeys/practice60/config.h
* Update rules.mk
* Update keyboards/cannonkeys/practice60/config.h
* Update config.h
* Rebased from Master
Rebased from Master
* Trying to fix problems in my kyria steez
* repeating last commit.....
* repeating last commit on EDIT layer but swapping direction
exit
* moving the reversed desktop moves to the symbol layers on the same hand, for easier activation
* adding mac desktop movement keys to Kyria layout
* Adding readmes to my keymaps
* Removing a png...
* Update keyboards/ergodox_ez/keymaps/rmw/keymap-mac.c removing EPRM case
* Apply suggestions from code review
Great updates to various old-school or outdated ways I was doing things, removing some commented out code, etc.
* Apply suggestions from code review
Additional improvements
* Moving tapdances.cpp to userspace as tapdances.c
* reindenting the Kyria keymap to follow four-spaces convention, turning off oled on my kyria, improving the led handling on the Ergodox.
* updating led stuff on the other two versions of the keymap, removing EPRM key from main keymap
* Apply suggestions from code review
I'm adding these various removals to the config file because it seems that at this time those settings are in harmony with the ergodox_ez defaults.
* Moving encoder functions into their own userspace file
* Apply suggestions from code review
Removing settings that are now defaults, clearing out placeholder custom keycodes (smh)
* updating encoder functions.
* Moving to LAYOUT_stack for all layers, adding end of file newlines, switching to some shorter keycode aliases
* Okay, refactor is well underway.
* refactored! Also improved led handling for ergodox and rgb handling for kyria
* removing mac/windows swappable version because I don't feel like dealing with it when reflashing is so easy.
* moving LAYOUT_stack into kyria.h
* moving the alternate default layer down next to QWERTY
* [Keymap] Add pierrec83's gherkin keymap
Contribute my gherkin keymap upstream as it is semi-stable. It has grown
in symbiosis with my Kyria keymap which is already upstream.
Add a readme
* Remove generated keymap and instructions to generate it as it is done by qmk flash
* Initial fork of Sinc
* Setup keymaps, layouts, and encoders
* Add ANSI configurator layout
* Add ISO layout for configurator
* Add all layout option for configurator
* Fix spacing
* Remove extra line
* Remove unneeded ifdef
* Update readme.md description
* Enable bootmagic lite
* Update USB descriptor
* Add modern led code
* Update default keymap for readability
* Update default keymap readme with layout image
* Add VIA keymap
* Update keyboards/noxary/268_2/keymaps/default/readme.md
Flip order of layout image and title
* Update keyboards/noxary/268_2/keymaps/via/readme.md
Flip order of layout image and title
* Update keyboards/noxary/268_2/readme.md
bullet point keyboard maintainer
* Update keyboards/noxary/268_2/readme.md
Change list style
* Update USB descriptors
* Update default keymap for readability
* Update readme description
* Update rules.mk build options, enable bootmagic and mousekey
* Add commented modern led code
* Add VIA keymap
* Update default keymap readme.md layout image
* Update keyboards/noxary/x268/rules.mk
remove incorrect comment
* Update keyboards/noxary/x268/x268.c
remove commented setPinOutput(B1)
* Update keyboards/noxary/x268/keymaps/default/readme.md
Flip order of layout image and title
* Update keyboards/noxary/x268/keymaps/via/readme.md
Flip order of layout image and title
* Update LED function to led_update_kb()
* New custom 'super alt' keymap for the Drop ALT
* Improvements to 'super alt' keymap based on PR feedback
* Fix flickering LED caps lock bug
* Code cleanup from PR feedback
* Minor keymap layout cleanup
* enable NKRO and keep consistent with bootmagic set to lite
* Update keyboards/1upkeyboards/1up60hse/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* added keyboard 5x12 to boardsource folder
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Fix incorrect delay when setting WS2812 (and similar) leds
* Add documentation for WS2812_DELAY_MICROSECONDS
* Remove improper cast to uint8_t
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* Remove unneeded cast to uint8_t and correct math
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* microseconds -> µs
Co-authored-by: Ryan <fauxpark@gmail.com>
* Make documentation better match the spec sheet.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Rename macro to match spec sheet
* Further correction to the delay maths for the SPI case.
Co-authored-by: Joel Challis <git@zvecr.com>
* Move ws2812_common.h to the drivers directory
* Revert "Further correction to the delay maths for the SPI case."
This reverts commit e61b56a2cfc7dfec9992a7a3af92afa50e5b8ec0.
* Remove ws2812_setleds_pin(); consolidate ws2812.h
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* initial commit for froggy 106 key mode
* add mode indicator on OLED
* use #pragma once instead of include guard
* remove unusable codes
* remove audio codes, because helix rev.2 has no audio feature
* use set_single_persistent_default_layer
* remove eeprom update check
OLED Display fixes
Add support for RGBLIGHT Layers
Add gaming layer to corn and kyria
RGBLight Startup Animation fixes and improvements (uses matrix_scan now!)
Pimoroni Trackball support added (IT'S RGB!!!)
Fix issues due to code changes
* Add S7 Elephant Rev2 Support
* Apply suggestions from code review
I tested the changes on my board as well, thanks for the suggestions!
* Added a default folder in the makefile so that this would no longer be a breaking change
* added bordsource 3x4 macro pad
* added bordsource 3x4 macro pad
* Update keyboards/boardsource/3x4/3x4.h
* Update keyboards/boardsource/3x4/3x4.c
* Update keyboards/boardsource/3x4/config.h
* Update keyboards/boardsource/3x4/config.h
* Update keyboards/boardsource/3x4/config.h
* Update keyboards/boardsource/3x4/config.h
* added link to readme
* Update keyboards/boardsource/3x4/keymaps/default/keymap.c
* Apply suggestions from code review
* changed the layout to refelect the keyboard
* Update keyboards/boardsource/3x4/info.json
Oh your right my bad. In the future is there an easier way for me to test the info.json and the confiscator before doing my pr?
* Apply suggestions from code review
* got 3x4 building again
* Apply suggestions from code review
* applied requested change on readme
* Update keyboards/boardsource/3x4/readme.md
* Apply suggestions from code review
* add ansi and iso layouts
* fix iso map mistake
* fix mistake again...
* Update keyboards/kbdfans/kbd67/mkii_soldered/keymaps/iso/keymap.c
* rename layout macros to the blocker variants and add ansi_split_bs
* Apply suggestions from code review
* Add Kyria keymap
* clean split hand detection code
* rename "joystick" to "thumbstick"
* thumbstick overhaul
* removed angle correction, seems buggy
* save some memory
* Remove deprecated config option
* Use the correct types for getting host led states
* Fix include path
* Made .h files for encoder and oled code
* Increase speed cap on thumbstick
* Add custom corne keymap
* Clean up rules.mk
* Clean up base layer on keymap.c
* Clean up lower layer on keymap.c
* Clean up raise layer on keymap.c
* Clean up adjust layer in keymap.c
* README cleanup
* replaced "normal" numbers with "keypad" numbers:
KC_P4 replaced by KC_KP_P4
* replaced "normal" keys on Numpad Layer with the "KeyPad" keys
KC_1 replaced by KC_P1 etc.
* Fixing via issues
* Fixing whitespace issues on the keymap
* Fixed the default via layer 1 keymap, was a little weird before
* Removing redundant declarations in via/rules.mk
* preliminary check in, basically a copy from 159's github with a few additions to get it to compile
* update readme
* fixup the LAYOUT macro labels to be more reasonable
* add tkl_ansi LAYOUT macro for community layout support
* clean up rules.mk, add community layout suport, and add in bootloader
* add a tsangan layout macro
* spruce up readme
* add VIA keymap
* add qmk configurator support
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* remove unneeded file
* Update keyboards/projectkb/signature87/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/projectkb/signature87/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Using the wpm feature, I create a responsive OLED animation that changes based on how fast the user types. As written there are three phases (It's bongo cat!) but can easily be reconfigured and replaced with other images.
Multiple byte arrays consume considerable space so choose your usage wisely. When customized, the smaller the byte array used, the better, due to space limitations on most microcontrollers.
I made this with no prior knowledge of C, so I'm looking forward to any and all suggested improvements.
Credit is owed to obosob for laying the foundation for this little script as well to /u/pixelbenny for graciously providing the bongocat artwork I adapted for the animation.
The config.h includes a tweak to the Kyria's LED mapping, so that the order now reflects their physical positions, making animations smoother.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Simon Schuster <SimonSchuster@Simons-MacBook-Pro-2.local>
Co-authored-by: James Incandenza <james@ij.net>
A user in Discord reported that the right bracket and ISO hash keys on
KBD67 rev2 using LAYOUT_65_iso were swapped. When comparing
LAYOUT_65_iso with LAYOUT_65_ansi, the problem with a wrong assignment
of the right bracket key is obvious — that key is K1D in the ANSI layout
macro, but the ISO layout macro had K1E there, and K1D at the position
of the ISO hash key.
Fix the LAYOUT_65_iso macro by swapping those arguments (and also align
the K1D argument for the right bracket key properly).
* Gami Studio Lex60: Configurator Layout support
* correct key sizes on bottom row per lukelex
* add LAYOUT_60_ansi
To test, run `make gami_studio/lex60:default_60_ansi` and flash.
* add 60_ansi keymap
To test, run `make gami_studio/lex60:60_ansi` and flash.
* remove data for 60_ansi layout
* Added Via config for Clueboard 66
* Update keyboards/clueboard/66/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Enabled MouseKeys
This required enabling LINK_TIME_OPTIMIZATION_ENABLE
* Added 4th layer as per tzarc's recommendation on another PR
Co-authored-by: Ryan <fauxpark@gmail.com>
ANAVI Macro Pad 8 is an open source mini mechanical keyboard with
8 keys, backlit, addressable RGB WS2812B LED strip on the back and
mini OLED display. Powered by ATmega 32U4 microcontroller and with
microUSB connector.
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Signed-off-by: Leon Anavi <leon@anavi.org>
* Add Via support for Percent Canoe
* Removed unnecessary flags from rules.mk
* Changes as per PR
* Added 2 additional empty layers (for a total of 4)
* Set a unique vendor id for all percent studio boards
* Set a unique product id for the canoe
* Fixed formatting, removed trailing comma
* Fixed PS/PT typo for vendor id
* Removed unnecessary variables
* Removed unnecessary slashes
* Fixed missing layer name
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* pick a sane VID
* add the VIA Keymap
* update copyright notice
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* [Keymap] plattfot - Kyria layout
Keymap for programming, writing in both English and Swedish and
easy navigate a tiling window manager.
See README.md for more info
* Fix letter case on the headline for the readme
As suggested by fauxpark
* Update keyboards/kyria/keymaps/plattfot/keymap.c
Clean up double tap
As suggested by fauxpark
* Update led check for render_status
As suggested by fauxpark
* Update to use get_highest_layer for encoder_update_user
As suggested by fauxpark
* Missing an apostrophe in the header of the README.md
Last minute change.
* Removed explicit initialization for _DEFAULT
As suggested by drashna
* Use smaller image for the README.md
As suggested by noroadsleft
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* Fix crkbd slave matrix print to require debug_matrix
* Remove redundant include
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Re-add liles after hard reset
* repopulate with keymap
* Update keyboards/minidox/keymaps/rsthd_combos/keymap.c
Updated how the layers are defined to reduce firmware bloat
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/minidox/keymaps/rsthd_combos/keymap.c
Removed unnecessary key codes
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/minidox/keymaps/rsthd_combos/keymap.c
Removed backslash from each line of the layers in accordance with current convention.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Edit of readme
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Normalise layout and README from yttyx niu keymap.
* Correct case of README.
* Changes following review.
Co-authored-by: Nick Willis <nick@theb.org.uk>
* - Balance 12 layers now in their final form
- Added Plover layer
- Updated README to use layout images
* Add headings to layer images.
* - Remove redundent TO(_BA) from FC layer
- Link to new FC layer image from README
* Highlight home keys.
* Changes following review.
* Fix info about RGB LEDs on the bottom.
* Added RGB LEDs support
* Added RGB LEDs config options
* Added minila layout with RGB keys
* Create readme.md
* Update keyboards/ymdk/bface/keymaps/minila/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/ymdk/bface/keymaps/minila/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/ymdk/bface/keymaps/minila/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/ymdk/bface/keymaps/minila/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/ymdk/bface/keymaps/minila/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* do the basic port for the WM1
* with much help from tzarc, get the addresses correct
* make the keymap more closely mirror what the board has
* Add QMK Configurator support
* update the readme
* get indicator leds working
* enable RGB underglow
* fix up rgb underglow
* add notes regarding existence of backlight
* Update keyboards/wolfmarkclub/wm1/readme.md
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/config.h
* Update keyboards/wolfmarkclub/wm1/ld/wm1_f103.ld
* Update keyboards/wolfmarkclub/wm1/bootloader_defs.h
* Update keyboards/wolfmarkclub/wm1/config.h
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/wm1.c
* Update keyboards/wolfmarkclub/wm1/wm1.c
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/readme.md
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* update readme
* Add support for Ace of Spades
* Fix the F-row mappings
* Add the tkl_iso layout
* Put KC_PAUS back in place of top layer reset
* aholland909 personal keymap for Ace of Spades
* Address PR feedback and rename to aos/tkl
* Rename keyboard implementation filenames
* Remove unnecessary layers
* info.json for the configurator
The factory TMK firmware for the TADA68 supports backlight breathing,
so I was surprised when the BL_BRTG key I set up in the online QMK
configurator didn't work.
As far as I can tell, this was just a simple omission.
* Added Chimera Ortho keymap
* Cleaning up the rules
* Removing firmware sizes
* Modified URLs to point to new locations
* Remove _quantum functions from custom matrix.c code
* Fix 1<col instead of 1<<col typo in matrix_is_on()
* Make PREVENT_STUCK_MODIFIERS the default
* Removing the IS_COMMAND custom definition
* Adding info.json
* Adding config overrides
* Adjusting for the reformat
* removing backlight reference
* fixing some compile issues
* Fixing a matrix issue
* Update keyboards/chimera_ortho_plus/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* lining up the matrix
* Update keyboards/chimera_ortho_plus/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/chimera_ortho_plus/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/chimera_ortho_plus/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* added git codes
* started git layer
* finished structure for git layer. MOD: replaced mouse with mod keys on right hand
* layout changing layer
* mod enter. default qwerty layer. removed mods on number layer
* workman layout. git log, show. blank enter and bsspace
* config layer. toggleable ctrl/alt for OS
* removed keymap comments
* strings and combos layers. sarcasm and ctrl_ctv. RGB configs
* reintroduced enter and bspace. delete backspace as a function. git push -u and checkout -b
* string macros
* OS specific home/end
* OS mac & win keys. N delete global backspace
* refactored backspace functions
* ctrl lctv macro
* base layer toggle fix
* whitespace
* BS + L for FF and chrome
* replaced 1 keycode with userspace
* added userspace config
* remove comments
* add another keycode with a variable
* moved all keymaps and codes to common file
* ctrl z mod
* removed ctrl z
* sipmlified OS functions
* moved is_win to keyboard level
* added mac alt tab
* added ctrl tab in mac + clean up variables in art.h
* tild string macro. added mac left/right + home/end
* mac ctrl backspace
* enum layers for default layout
* added ergodone keymap
* ergodone compiles
* clean up
* clean up
* removed obsolete OS_HOME/END
* removed var
* added ctrl nav to split75
* ergodone clean up + caps lock fix 75
* fix mac ctrl alt on right handside. added mac alt tab left right
* fix ergodone config override
* fixed alt left right not working on mac
* added OS ctr_alt
* mac ctrl del. fix tild
* simplified tild macro
* git stash apply
* send_string_remembering_lenght
* shifted strings print
* restored KC_BSPACE functionality
* moved KC_BSPC
* numpad layer on Fn
* media lights
* ergodone final clean up
* ergodone GIT AND MEDIA layers
* ergodone GIT LAYER switch
* default behaviour for all modified keys on BASE layer
* refactored logic for default keycodes
* ergodone final layers
* ctrl_cav for translation and ctrl_l fix
* toggleable layer with numpad
* comments
* numpad layer
* Update users/art/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* enable dynamic macros for split75
* git branch and develop/master
* removed esc from Nav
* ergodone: ctrl alt for shift layer
* macros and right alt for ergodone
* fix ergodone N_backspace not working on git layers
* mac language switch with alt+shift
* Update users/art/art.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update users/art/art.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update users/art/art.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ergodone/keymaps/art/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update users/art/art.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* flashing leds to indicate current os
* using rshift on shifted layers
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Via support to the YMD09
* Update keyboards/ymdk/ymd09/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ymdk/ymd09/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Candybar: VIA support for lefty and righty
* Update keyboards/candybar/lefty/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/candybar/righty/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/candybar/lefty/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Add Via keymap for Contra
* Added Via-enabled keymap
* Changed VENDOR_ID from 0xFEED to 0x4354 (CT)
* Removed unnecessary RGB mappings
* PR changes
* Removed empty via/config.h
* Changed product ID from 0x6060 to 0x0001
* Add files needed to The Via support on Melody 96
* Remove manufacture name from product name
* replace blank key with Transparent keys
* Update keyboards/melody96/rules.mk
* Update keyboards/melody96/keymaps/via/keymap.c
* Change Product ID to "M" + 96
* Update keyboards/melody96/keymaps/via/rules.mk
* add LTO to via's local file
* Update keyboards/melody96/rules.mk
* more stoof
* readme update
* reverting keymap
* re-adding userspace
* new userspace needed
* no want 0 under thumb
* gettin fancier with my knob
* macro fix
* had pins for oled ver
* wait, these are the right pins
* reduntant line
* image fix
* get highest layer every day
* whoops
* correct rev name in json
* a few good catches
* what I had planned
* Replace custom RCTRL implementation with built-in LM
Caveat: sends LCtrl instead of RCtrl
* Enable VIA support in KBD6X keymap
* Disable LTO on ChibiOS boards
* Disable locking support and Magic keycodes for all keymaps
* Organize and annotate rules.mk and config.h files
* Enable Console for Melody96 keymap
* L_RANGE_KEYMAP → LAYERS_KEYMAP
* Revert "Replace custom RCTRL implementation with built-in LM"
This reverts commit 17d706a82d7e31b53cd84efeb9b2ddb9922a2368.
* Set DYNAMIC_KEYMAP_LAYER_COUNT to 3 in Doro67 and Wasdat keymaps
* Enable Bootmagic Lite for all VIA keymaps
* added koy layout to qmk on xd75 board
* added koy keymap for the atreus62 board
* reduced time for autoshift
* added documentation
* changed layer 7 to a tap toggle and adjusted mouse speed a little
* Update keyboards/xd75/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* Update keyboards/xd75/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* Update keyboards/xd75/keymaps/ScheiklP/koy_common.h
* Update keyboards/atreus62/keymaps/ScheiklP/koy_common.h
* Update keyboards/atreus62/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* Update keyboards/atreus62/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* changed keymap to lowercase name to conform with qmk guidelines
* Update keyboards/xd75/keymaps/scheiklp/rules.mk
remove unnecessary rules
* Update keyboards/atreus62/keymaps/scheiklp/rules.mk
remove unnecessary rules
* moved common files for koy layouts to the users folder and removed empty file
* Update keyboards/atreus62/keymaps/scheiklp/keymap.c
* Update keyboards/xd75/keymaps/scheiklp/readme.md
* Update keyboards/xd75/keymaps/scheiklp/readme.md
* Update keyboards/atreus62/keymaps/scheiklp/readme.md
* Update keyboards/atreus62/keymaps/scheiklp/readme.md
* Added MACLOCK macro
Added my MACLOCK macro to my Atreus keymap.
* Updated comments & readme
Documented where in the layout I added the MACLOCK macro.
* Updated with my super16 version for my keypad
* Added my folder to super16
* Set max LED brightness to 50%
* Added custom keycodes for enter/shift+enter and copy/paste on one key
* Fixed the boot up layer color
* Renamed folder
* Revert changes to root super16 files
* Update keymap config.h and rules.mk files
* Restore deleted 15game keymap files
* Corrected the hold keycode for CCCV
* Removed unnecessary comments
* Update keyboards/1upkeyboards/super16/keymaps/nblyumberg/keymap.c
Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com>
* Update keyboards/1upkeyboards/super16/keymaps/nblyumberg/config.h
Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com>
* Update keyboards/1upkeyboards/super16/keymaps/nblyumberg/keymap.c
Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com>
* Rewriting the layer color functionality
* Revisions
* Fixed the layer switching
* Fixed the default layer color problem
* Added a function suggested by Drashna but it won't compile
* Cleaned up the code for PR
* Removed unnecessary define for layer colors
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
* [Keyboard] Added D48 keyboard.
* Updated README.
* Cleanups.
* Moved d48 to handwired/
* Added link to build process album.
* Coding conventions cleanups.
* Added DS1307 RTC!
* Minor cleanups.
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Minor refactoring.
* Readme fix.
* Moved leftover keymap-specific code from keyboard space into keymap.
* Added encoder button pins to extra matrix row.
* Updated README, updated pinout & cleaned up the glcdfont
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update config.h
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Added default keymap. Refactored existing keymap.
* Update keyboards/handwired/d48/README.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Co-Authored-By: Joel Challis <git@zvecr.com>
* Minor alignment fix.
* Update keyboards/handwired/d48/glcdfont_d48.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Changes as per PR.
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add TENKI keyboard
Add TENKI keyboard, default keymap and via keymap
* Minor Update Readme.md
Change description of hardware supported
* change layout name
change layout name from ortho_20 to ortho_5x4
* Fix invalid format in info.json
Fix invalid format in info.json
* Fix invalid format
* Fix formatting
Fix formatting tenki.h
* Fix formatting in keymap.c
Fix formatting in keymap.c
* Add new line at EOF info.json
Add new line at EOF
* Fix formatting
* Fix formatting
* Update rules.mk
Fix Formatting
* Initial
* update json, added basic oled config, updated matrix to correct rotary location
* disable oled by default
* Tuned oled for release
* Completed OLED function implementation
Correct spelling error in readme
* Fixed image in readme
* Should not be in this branch
* Incorporating recommended changes by zvecr
* Update keyboards/le_chiffre/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/le_chiffre/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Keyboard: add treeadstone48
* rename layout defines
* Use of pragma once
* move common include code
* fixed info.json
* change keymap layout from kc to normal
* fix alpha revision keymap
* fixed info.json
* remove USE_Link_Time_Optimization
* Add keyboard firmware of treadstone32lite
* fixed by the review
* I used to set this to a per-keymap setting, so I'll undo it.
* Community layout support for KBD67 hotswap
* Community layout support for KBD67 rev1
* Community layout support for KBD67 rev2
* Move bcat's KBD67 hotswap layout to community
* New keymap layout for dztech/dz65rgb/keymaps
* New keymap layout for dztech/dz65rgb/keymaps
- Conding conventions fixes
* Fix typo in Leader Key table
* PR #8199 Feedback Commit #1
* Fixed data types and function names - Simplified accent macros by removing repetition - Added selection wrap macros - readme.md doc updated with changes
* PR #8199 second feedback commit - Clarified function names, variables names and comments
* Fix: accent output fix _grave <==> _circumflex
* dry fixes on led set_color with hsv and led blinking code blocks
* my new layout, draft one, untested.
* updated mapping to include more keys
* updated layout name to be more descriptive. Updated readme with more information.
* added more info to the readme and spellchecked it.
* Added the Json for the keyboard layout images and updated the readme to reflect this.
* Updated Image link
Updated Image link so that it links to the correct place
* updated copyright info to include MY name.
* Updated copyright attribuatation to include the author of the file I modified.
* added the backlighting key back to the adjust layer so that it is usable.
* updated the name of the keymap to match my github name.
* Mitor Tweaks
Updating Dvorak keymap to change location of Slash and Backslash
to positions more in line with my 12x5 and similar ortho layouts
* Fixed readme.md
Tidied up the readme and make some minor changes.
* Adding atreus config file
Adding a config file for my Atreus keyboard. This is to help with
the keychatter issues I've been having on my Atreus.
* Changes as requested per @zvecr
Added `#pragma once` to beginning of config.h file as requested
by @zvecr.
* Working on proto
* Start adding VIA support
* Apply suggestions from code review
Removed redundant comments and fixed typos
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-Authored-By: Joel Challis <git@zvecr.com>
* Delete useless config.h
As per code review
* Delete elongate.c
As per code review
* Updated readme.md
* Update keyboards/acheron/elongate/keymaps/default/keymap.c
As per code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Removed RGB_MODE_TEST definition and substituted for RGB_M_T
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Reverted changes to alice.h
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update info.json
* Update via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Solve compiling issue for via keymap
* Add botmagic support and remoce console_enable
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/acheron/elongate/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/acheron/elongate/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/acheron/elongate/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/acheron/elongate/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* id80: Transpose matrix to use faster COL2ROW routines
Even the standard QMK matrix_scan() function can give about 2 times
higher scan rate (if compiled with optimizations enabled) if the COL2ROW
matrix layout is used instead of ROW2COL. Although the ID80 PCB is
wired using the ROW2COL matrix layout, it is possible to transpose the
matrix from the QMK standpoint, so that "columns" would correspond to
horizontal connections, and "rows" would correspond to (mostly) vertical
connections; in this case the matrix could be handled as if it had the
COL2ROW layout.
The matrix layout change makes the older VIA JSON layout definition
incompatible, but the corresponding JSON was not yet accepted to the VIA
repository, so it should still be safe to make this change.
* id80: Remove obsolete comments
* A few final edits to the keymap and readme.
* Update keyboards/xd75/keymaps/buzzlighter1/readme.md
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/xd75/keymaps/buzzlighter1/readme.md
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/xd75/keymaps/buzzlighter1/readme.md
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/xd75/keymaps/buzzlighter1/readme.md
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com>
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* initial commit for TGR 910 CE
* got firmware working on the 910 CE
* add VIA support
* add iso and all layouts
* update information about resetting the board
* fixup default keymap to have a second layer
* fixup default keymap
* add VIA enabled keymap
* cleanups and adding community layout support
* add caps lock led support and backlight
* add qmk configurator support
* Update keyboards/tgr/910ce/info.json
* Adding all relevant files for the Funky40
This should add all proper files for the funky40 a keyboard I designed for myself, /u/TheFourthcow, a 40% ortholinear with split spacebar.
* Second attempt to add all relevant files for the funky40, includes all reccomended changes from my previous pull request
* Revised most files for Funky40 including reccomenations from my previous pull request
* further modifications made to default funky40 board, compiles on my side with no errors hopefully this one works!
* Update keyboards/funky40/readme.mk.mk
* Update keyboards/funky40/keymaps/default/readme.md.md
* Update keyboards/funky40/keymaps/default/keymap.c
* Update keyboards/funky40/keymaps/default/keymap.c
* Update keyboards/funky40/keymaps/default/keymap.c
* Update keyboards/funky40/config.h
* updating readmes and keymap
* final update to keymap and readmes should function correctly with updates requested
* made changes as requested by noroadsleft to config and readme
* mpstewart dz60 layout
* Remove macro aliases from keymap
* Remove macro aliases from keymap
* Update keyboards/dz60/keymaps/mpstewart/keymap.c
* Remove macro aliases from keymap
* use AG_TOGG instead of AG_SWAP
Also some commentary changes, and a change to one of the layout graphics
* Add new keymap to vitamins_included, this has four layers. Updated config file to sync rgb between the two halves.
* Cleaned up and added documentation for the keymap
* Updated the keymaps and documentation.
* Update keyboards/vitamins_included/keymaps/vitavim/keymap.c
* Update keyboards/vitamins_included/keymaps/vitavim/keymap.c
* Update keyboards/vitamins_included/keymaps/vitavim/keymap.c
* Update keyboards/vitamins_included/keymaps/vitavim/config.h
* Update keyboards/vitamins_included/keymaps/vitavim/keymap.c
* Update keyboards/vitamins_included/keymaps/vitavim/keymap.c
* Update keyboards/vitamins_included/keymaps/vitavim/keymap.c
* Update keyboards/vitamins_included/keymaps/vitavim/keymap.c
* Update keyboards/vitamins_included/keymaps/vitavim/keymap.c
* Update keyboards/vitamins_included/keymaps/vitavim/keymap.c
* Move menu key on ergo boards to match staggered
* Unify 60_tsangan_hhkb and 60_ansi_split_bs_rshift
* Sync KBD67, Quefrency with community layouts
* Update ergo KLE images
* Update community layout KLE images
* Update KLE images/descriptions for remaining keebs
* Add VIA keymap
Also adds more backlight levels.
* Change wasdat code PID
* Alias LAYOUT_fullsize_iso to LAYOUT_all
* Change VIA layout macro to LAYOUT_all
Co-authored-by: Maarten Dekkers <maartenn2001@gmail.com>
* Remove more mouse keys settings missed in #8836
* Turn off more unwanted make options
* clang-format my userspace
* Reword ergo layout docs so Crkbd is canonical
* Add a basic readme to my userspace
* Tweak Crkbd readme wording and fix typos
* Enable SPLIT_USB_DETECT for Lily58 w/ Elite-C bug
* add rev2 and thus rev1 as well
* nitpicks :)
* buncha stuff
* back to one rev
* back to community layout with errors
* I see you've met my typo
* remove default48 kemap rules
* re-rework into 2 revs
* readme changes
* whitespace cleanup
* default folder
* rev1 be default
* Update default vitamins_included keymap
* Turned on NKRO support
* Added NKRO toggle key to keymap
* Cleaned up key map to be more up to date with current standards
* configured RGBLED_SPLIT
* Update to xealousbrown.
5-13ms Latency decrease, 4x scan rate improvement.
(CUSTOM_MATRIX = lite) is a really great feature!
* Updated Readme.md, added an extra speedhack.
* More optimizations
* Update keyboards/handwired/xealousbrown/rules.mk
* Update keyboards/handwired/xealousbrown/rules.mk
Evidently there is a polycarb variant with underglow LEDs. This change should support that without negatively impacting aluminum case variant which only has 2 RGB LEDs on top.
* Adding Novem keyboard (macropad) and demo layout
* Making changes suggested during pull request
* Removing keyboards/novem/keymaps/default/config.h as suggested during the pull request
* Moving keyboard to the handwired folder and changing the build line from readme in order to reflect this new location
* Add revision 1 and revision 2 to ProjectKB Alice PCB
* Swap SLEEP LED to no
* Basic root rules.mk
* Apply suggestions from code review
* Update keyboards/projectkb/alice/rules.mk
* add VIA enabled keymap with some layers taken out for space
* get a more sane VID and PID so we don't collide with the other BMC powered boards
* small cleanups
* Update keyboards/tgr/jane/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* add tkl_ansi_tsangan LAYOUT
* add tkl_iso_tsangan LAYOUT
Co-authored-by: Ryan <fauxpark@gmail.com>
* porting the niu_mini to via
* Wrong values in mk
* Updating to unique Vendor ID and Product ID
* Addressing zvecr comments
* Addressing fauxpark comments
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Lauren Harris <lauren.y.harris@outlook.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* id80: New keyboard (IDOBAO ID80)
Add initial support for the IDOBAO ID80 keyboard.
Most source files were generated by the KBFirmware JSON to QMK Parser
(https://noroadsleft.github.io/kbf_qmk_converter/) based on the
ID80.json file provided by the keyboard vendor. The only change to
rules.mk was to set `COMMAND_ENABLE = no` to make the compiled firmware
fit into the available flash space.
* id80: Update default keymap to match stock
Update the Fn layer in the default keymap to match the stock firmware
which was actually flashed into the PCB.
* id80: Add Caps Lock indicator support
Although the KBFirmware JSON includes information about the MCU pins
used for keyboard indicator LEDs, the KBF to QMK converter does not
generate the required code automatically. Implement the LED handling
code, and at the same time switch from the older `led_set_kb` API to the
newer `led_update_kb`.
* id80: Remove placeholder functions
The provided skeletons for `matrix_scan_kb` and `process_record_kb` did
not do anything useful, so remove them.
* id80: Use Esc as the Bootmagic Lite activation key
The Esc key is not at the (0, 0) position in the ID80 matrix, therefore
setting `BOOTMAGIC_LITE_ROW` and `BOOTMAGIC_LITE_COLUMN` is required to
use the Esc key for Bootmagic Lite.
* id80: Update info.json
Replace info.json generated by the KBF to QMK converter with another
version generated using http://www.keyboard-layout-editor.com/ and the
KLE raw to QMK info.json converter (https://qmk.fm/converter/). The
updated info.json has the correct physical layout (the distance between
the function key row and the main block is actually 0.25U, but the
vendor-provided ID80.json had 0.5U there) and correct key labels (using
the stock layout instead of raw matrix locations and pin names).
* id80: Enable NKRO
The default keymap is updated to have NK_TOGG at Fn+N, like most other
keyboards which have NKRO enabled.
* id80: Use unique USB vendor/product ID
Having an unique USB vendor/product ID is required for VIA support.
The vendor ID value is the same as for the `idobo` (ID75) keyboard.
* id80: Fix right modifiers in the default keymap
For some reason the default keymap converted from the vendor-supplied
JSON had the right Shift, Alt and Ctrl keys mapped to the left side
modifier keycodes.
* id80: Remove empty row 6 (F0) from matrix
The matrix layout which was defined in the vendor-supplied ID80.json
file had 12 rows which corresponded to the left and right parts of the
6 physical rows. However, the row 6 of the matrix (connected to the F0
pin), which corresponded to the right part of the physical bottom row,
was completely empty (all 9 keys of the bottom row were placed in the
matrix row for the left part). Keeping this row in the matrix just
wastes resources; in particular, when the VIA support is enabled, having
a 9×12 matrix with 4 layers leaves only 122 bytes available for dynamic
macros, which is less than the recommended minimum of 128 bytes.
Removing the unused row reduces the matrix size to 9×11, which leaves
194 bytes of EEPROM space for dynamic macros.
* id80: Update row numbers in the LAYOUT macro
Update row numbers in the names of the LAYOUT macro parameters after
removing a row in the middle.
* id80: Set RGBLED_NUM to 20 to match the actual PCB
The vendor-supplied ID80.json file specified that the PCB should have
28 RGB LEDs in the chain. However, the actual PCB that was shipped
from AliExpress had 20 LEDs in the chain (16 underglow LEDs, and then 4
more LEDs on top of the PCB, to the right of the Enter key location).
Update RGBLED_NUM to match the actual PCB.
* Add support for Caps Lock LED
Currently ignores the fact that led_state is not synced between halves, so caps lock LED doesn't do anything if USB is plugged into right half
* Set initial backlight and RGB mode/values on blank EEPROM
* Set default VIA layout options
* Add backlight/RGB ifdefs
* Set bootloaders for each rev
* Add handwired BDN9-BLE
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/bdn9_ble/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/bdn9_ble/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/bdn9_ble/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Cannonkeys DB60 Keyboard
* WhitespacE
* Add ISO and make layer names more idiomatic
* backlight enable
* Remove big backslash from ISO
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update for correct matrix
* Apply suggestions from code review
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update chibios config files
* Complete VIA keymap
* Remove ugly hack comments
* Update keyboards/cannonkeys/db60/rules.mk
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Save progress
* Finished matrix and everything
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update DevastatingTKL
* Renames
* Add renamed files
* Update chibios files and VIA keymap for completion
* Some cleanup
* Apply suggestions from code review
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cannonkeys/devastatingtkl/rules.mk
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Added personal minivan keymap, and started work on splitish directory
* Merge branch 'splitish' of github.com:RSchneyer/qmk_firmware into splitish
Trying to undo attempted fix
Added splitish keyboard files, removed personal Minivan keymap
* Removed personal Minivan keymaps
* Fixed small issue in readme
* Added changes based on inital PR feedback
* forgot a semicolon
* Quick config.h file and default keymap update
* added vim compatibility, backspace above enter, and general macOS optimizations on top of default layout
* add space65 macOS keymap for vim users with an optimized bottom row
* Update keyboards/projectkb/alice/keymaps/keithlo/keymap.c
* Update mousekey parameters in userspace
* Disable GRAVE_ESC in boards where it isn't used
* Tweak MODERN_DOLCH_RED and reset RGB on Shift+Toggle in KBD6X
* Disable RGB controls when Fn/Caps indicator lights are on
* Use LTO_ENABLE instead of setting -flto directly
* Add led_update_keymap, use SS_LCTL instead of SS_LCTRL
* Change TAPPING_TOGGLE from 2 to 3
* Fix RGB LED count on YD60MQ
* Split YD60MQ into 12-LED and 16-LED revisions
* Update readmes
* Make 12led the default version
* Readd base rules.mk, version→variant in readme
* Add syntax highlighting to code blocks in readme
* Add Via keymap for BM16-A
* Apply suggestions from code review
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Deleted as per noroadsleft
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Selectively adding pieces
* Adding georgi keymap
* Adding more files, fixing make
* Smaller makefiles
* Fixing make rules
* README more inline with QMK's guidelines
* Turning off buggy assert
* Improving documentation based on a user feedback.
* Slightly better schema
* Resurrected state machine diagram
* updated rules.mk and default keymap of Wonderland for VIA support
* Restored default keymap and rules.mk, added via keymap folder with modified default keymap and rules.mk, also fixed VendorID in config.h
* fixed jargon on layers 3 and 4 of Wonderland VIA keymap
* cleaned up via keymap, removed fluff
* default keymap for Wonderland restored
* removed unnecessary information from rules.mk
* made more readable per noroadsleft suggestion
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* ADD DecadePad
* Fix Key display bug
* fix
* firmware1
THIS IS A Backup commit
* firmware2
* rename all fill with lower case
* fix bug
* Final Version
Fix all bugs
* Requested change apply
* suggested apply
* change apply
* via test
* Apply change and fix via support problem
* created initial files for the lattice60
* modifying the keymaps and config
* keymap edits and docs
* modifying docs and added personal keymap
* added pic and website to readme
* added layout image for default keymap
* updating layout pictures
* minor formatting edit
* file cleanup
* trying to prevent errors with usbconfig
* removed usbconfig.h
* cleaning up comments
* switched to use community hhkb layout
* Make initial batch of files
* Tweak keymap
* Mod default keymap
* Add via compat
* Update default keymap based on real world use
* Remove RGB, LCD, MIDI options
* Remove unnecessary functons from orbit_x.c
* Update readme
* Cleanup makefile as necessary
* Make the readme file for default keymap not completely empty
* Update keyboards/ai03/orbit_x/keymaps/default/keymap.c
* Update keyboards/ai03/orbit_x/readme.md
* Update keyboards/ai03/orbit_x/info.json
* Add VIA to Gingham
- Add VIA keymap
- Fix minor typo in config.h
- Remove redundunt methods and defines
* Update keyboards/gingham/config.h
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* define VID/PID in post_config.h, add via keymap
* update readme, set vid/pid for via
* update keymap
* delete usbconfig.h, update keymap
* add status led feature
* Apply suggestions from code review
Co-Authored-By: Joel Challis <git@zvecr.com>
* undef vid/pid in keymap
Co-authored-by: Joel Challis <git@zvecr.com>
* Enable External EEPROM on Planck Rev6
* Update KC_MAKE macro to use qmk cli util
* Disable additional gradients for rgb matrix
* Update analog code for newer methods
* Update ergodox layout
* Disable Grave Escape
* Cleanup OLED code a bit
* Remove old unicode code
* Seperate RGB Matrix code from RGB Light code in userspace
* Massive overhaul an generalization of personal OLED code
Now lets hope I NEVER get a keyboard using a 128x32 in a normal orientation.
* Super tiny cleanup
* Enable Diablo layer on kyria
* clang format pass
* Additional OLED cleanup
* Added via config support for the launchpad
Added via config support for the launchpad
* Update keyboards/launchpad/keymaps/via/rules.mk
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/launchpad/keymaps/via/keymap.c
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/launchpad/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/launchpad/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/launchpad/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/launchpad/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/launchpad/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/launchpad/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Keyboard: add treeadstone48
* rename layout defines
* Use of pragma once
* move common include code
* fixed info.json
* change keymap layout from kc to normal
* fix alpha revision keymap
* fixed info.json
* remove USE_Link_Time_Optimization
* Refactoring all my keymaps.
- Not use tap dance
- Remove not use define aliases
- Remove not use incluse and extern value.
* default keymap extra key was changed
* remove rgblight_config
Co-authored-by: root <root>
* remove IT_PIPE duplicate and add IT_GRAD
IT_PIPE was declared 2 times, ones as ° and once as |. I changed the first declaration and called it IT_GRAD. I even fixed the definition because the ° in Italian is obtained with LSFT(IT_AACC)
* rename IT_GRAD to IT_DEGR
* fix missing music mode legend
* add missing plus_and_minus
* fix missing IT_ACUT definition
* change KC_LALT(KC_LSFT to LALT(LSFT
* Fix alignment
* remove leftover
* fix issue generated with chars while pushing
* fix typo
* add sigul folder in Planck keymaps
* fix LCBR and RCBR
* fix euro symbol
* fix RBRC
* change IT_LESS form KC_NUBS to KC_GRAVE
* add IT_TILDE and change IT_GRAV to IT_GRAVE
* initial commit
* add ideas to readme
* comment key lock
* add a bunch of new features as stated in readme.md
* check features added and list to do
* add macros on RAISE
* add F keys on numbers row on FN layer
* flag features added
* fix macro formulas
* move DESK and SGCOM under D and S
* invert IT_EACC and S(IT_EACC) to align the layout with that of the default Planck
* invert IT_EACC and S(IT_EACC) to align the layout with that of the default Planck
fix spaces for readability
* add missing legends for accented vowels
* format for readability
* move MOUSE button on B (same key that activates it) on MOUSE layer
* revert to commit befor I edit it
* initial commit
* edited to be easier to compare to _ansi.h
* remove keymap_italian_osx_iso.h and rename with edits keymap_italian_osx_ansi.h to keymap_italian_osx.h
I found out there were no difference at all
* fix missing #endif
* change the included file from italian.h to italian_osx.h
* fix debug key
* edit Numapd layer, add enter and bsps
* change TAPPING_TOGGLE from 2 to 3
* change italian_osx.h to italian_ansi.h
* rename quantum/keymap_extras/keymap_italian_osx.h to quantum/keymap_extras/keymap_italian_ansi.h
Now this file is a clone of the keymap_italian.h that appears to be working only for ISO keyboards. It also contains a few improvements for IT_PIPE (defined two times) and IT_ACUT (missing definition). Additionally it redefines LCBR and RCBR to LSFT(IT_LBRC) and LSFT(IT_RBRC)
* rename file
* redefines IT_BKSL and IT_PIPE based on KC_BKSL
* merge new italian
* add new osx_iso and osx_ansi version for italian.h and align BKSL to BSLS, fix double definition of PIPE
* rename BKSL to BSLS
* add FN_D and some comments
* add MOUSEKEY configuration
* update
* edit swap =/+ with ò/ì
* merge with master
* add MS_B to have _MOUSE when pressing B
* move RAISE on _FN
* add phone number
* remove CONTRA folder
* remove CONTRA folder
* Update keyboards/planck/keymaps/sigul/keymap.c
fix include definition
Co-Authored-By: Ryan <fauxpark@gmail.com>
* remove default planck kemap
* remove extern keymap_config_t keymap_config;
based on suggestion from @fauxpark, It's not needed as it should already be externed through one of the includes provided by QMK_KEYBOARD_H.
Co-Authored-By: Ryan <fauxpark@gmail.com>
* add user space for user sigul
* remove custom config moved to user space sigul
* comment tri layers state (moved to user space)
* remove tri layers update comment (code moved in user space)
* add secrets
* move enum and define to userspace
* Edit title
* move enum and define to sigul.h
* add thanks
* edit: moving to userspace enum, define and process_records
* add enum and defines
* add process_records
* cleaning code after moving code to user space
* add process_records
* cleaning code
* adding rules to manage secrets
* remove secretes
* first commit
* add macro timer
* add keycodes macro
* edit custom keycodes order
* add strings to send inside the secrets array
* remove codes for secrets & change secret to secrets
* edit secrets keycodes
* edit keycodes names and order
* add secrets.h and secrets.c
* add #pragma once
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update .gitignore
Co-Authored-By: Joel Challis <git@zvecr.com>
* add local gitignore for secrets
* remove secrets
* update for secrets
* change FN_D to IT_D
* remove FN_D definition
Co-authored-by: pisilvio <silvio@picampus.it>
Co-authored-by: admin <admin@admins-MacBook-Pro.local>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Rename UC_OSX (and related constants) to UC_MAC
* Update UNICODE_SONG_OSX references to UNICODE_SONG_MAC
* Update UC_M_OS references to UC_M_MA
* Add UC_OSX alias for backwards compatibility
* Add deprecation warning for UC_OSX to Unicode docs
* Add UC_M_OS alias for backwards compatibility
* Update newly found UC_M_OS and UNICODE_SONG_OSX references
* Add legacy UNICODE_MODE_OSX alias, revert changes to user keymaps
* Add legacy UNICODE_SONG_OSX alias, revert changes to user keymaps
* Replace removed sounds in Unicode song doc examples
* Change PID to allow differentiation between Rev. 3 and Rev. 4
* Rebadge thumb keys in macro to show physical wiring better
* Add more rules for VIA keymap
* Add keyboard jisplit89
Add jisplit89 keyboard.
A 89 keys JIS Layout keyboard.
Salicylic-acid3
* Update keyboards/jisplit89/keymaps/default/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/jisplit89/keymaps/default/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/jisplit89/keymaps/default/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/jisplit89/keymaps/salicylic/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/jisplit89/keymaps/salicylic/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/jisplit89/keymaps/salicylic/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/jisplit89/readme.md
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* Update keyboards/jisplit89/rev1/rev1.h
Co-Authored-By: shela <shelaf@users.noreply.github.com>
* Copyright has been updated.
Changed signature to Salicylic_acid3 and changed year to 2020.
* Update readme
Added a note to the build guide.
* Remove unnecessary definitions.
Remove unnecessary definitions.
* Update keyboards/jisplit89/keymaps/default/keymap.c
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/jisplit89/keymaps/salicylic/keymap.c
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/jisplit89/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/keymaps/salicylic/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/keymaps/salicylic/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/keymaps/salicylic/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/rules.mk
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/rules.mk
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/keymaps/default/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/keymaps/default/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/keymaps/salicylic/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/jisplit89/keymaps/salicylic/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Delete config.h
Removed to make it more default
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-authored-by: shela <shelaf@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* convert my 60 keymap to alice
* add via to rules for alice
* remove split backspace and add backlight keycodes
* disable LTO for alice pcb
* keymap alignment formatting
* initial commit
* preliminary support for mb17 using the qmk default keymap
* add the VIA keymap
* add qmk configurator support
* code cleanups before submission
* Update keyboards/mountainblocks/mb17/rules.mk
* Update keyboards/mountainblocks/mb17/info.json
* remove file
* Add initial KeebsPCB support
* Update readme
* Update readme
* Correct readme typo
* Update keyboards/acheron/keebspcb/config.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply @noroadsleft suggestions from code review
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/acheron/keebspcb/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/acheron/keebspcb/keymaps/default/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* add new layout for 65% with blocker and add matching keymap
the rev2 pcb gets used in the kbd67 which has a blocker between the left arrow key and the right ctrl key. this layout is missing so far even though it's probably the most used one for this board.
* add split backspace layout with blocker
* change keycode for backslash
* update rules.mk and add missing layouts in info.json
* Update keyboards/kbdfans/kbd67/rev2/rules.mk
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Add Kudox Game rev2.
* Add the keymap of Kudox Game a layer for regulating RGB.
* Modified rgblight_init when RGBLIGHT_ENABLE=no.
* Remove invalid codes.
* Modified *init* function right intention of framework.
* Set backlight and RGB pins for AVR onekeys
* Set pin for ADC as well
* Define ADC_PIN for F4 blackpills
* Use A0 for F4 ADCs
* Set ADC pins for F0 and F1
* [Keymap] Minidox Bepo layout
Todo :
Lower
Adjust
Update Lower E and Lower S on schema
* Added config.h
* Code review, update config.h
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: dolie <olivier.ghafari@pm.me>
Co-authored-by: Ryan <fauxpark@gmail.com>
* creation
new numpad layout for 23 keys
creation of new keymap
* Update cospad.h
* Update info.json
* Update keymap.c
* Update keymap.c
Added a macro for the "00" key.
* added two new keymap. one for each new layout.
The new keymaps are based on the default keymap but focus on
* Update keyboards/cospad/cospad.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/cospad.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/numpad2/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/numpad2/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/numpad3/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/numpad3/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/numpad3/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keymap.c
layout name fix.
* Update keyboards/cospad/keymaps/johannbl/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/cospad/keymaps/johannbl/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Delete keymap.c
* Rename keyboards/cospad/keymaps/johannbl/numpad2/keymap.c to keyboards/cospad/keymaps/johannbl/split_plus_and_zero/keymap.c
* Rename keyboards/cospad/keymaps/johannbl/numpad3/keymap.c to keyboards/cospad/keymaps/johannbl/split_zero/keymap.c
* Rename keyboards/cospad/keymaps/johannbl/split_plus_and_zero/keymap.c to keyboards/cospad/keymaps/split_plus_and_zero/keymap.c
* Rename keyboards/cospad/keymaps/johannbl/split_zero/keymap.c to keyboards/cospad/keymaps/split_zero/keymap.c
* Update keyboards/cospad/keymaps/split_plus_and_zero/keymap.c
Co-Authored-By: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Lodestone: add ANSI and ISO layout data and keymaps
* rename layout macros
LAYOUT_ansi -> LAYOUT_65_ansi_blocker_split_bs
LAYOUT_iso -> LAYOUT_65_iso_blocker_split_bs
* use four-space indent on the new keymaps
* add 65_ansi_blocker and 65_iso_blocker layouts
* VIA Support: GH60 Rev C and GH60 Satan
* Corrected GH60 VIA default keymap
* Corrected GH60 VIA default keymap pt 2
* Copied default keymap over via default keymap
* Satan GH60 default corrected for VIA
* Satan GH60 default corrected for VIA pt 2
* Satan GH60 LTO enable for size
* Transparent 4th dynamic layer for GH60 Via support
* Update keyboards/gh60/revc/info.json
* Update keyboards/gh60/satan/info.json
* Update keyboards/gh60/satan/info.json
* Removed deprecated JSON keys gh60/revc/info.json
* Removed inline comment next to VID for GH60 Satan
* add via support for pdxkbc macropad
* add VIA support for the pdxkbc
* clean out some commented code
* remove unused files
* comment the vendor ID
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/pdxkbc/keymaps/via/keymap.c
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Create rules.mk
Added rules.mk in keymaps/via
* Update rules.mk
Added new line at the end of the file
* Create via\keymap.c
Added keymap.c inside the via directory
* Update config.h in projectkb/alice
Defined VIA eeprom layout size to 2 bits to allow for 4 layout options
* Add Lodestone PCB
Working Firmware for Lodestone PCB tested on physical PCB prototypes.
* Update keyboards/flx/lodestone/lodestone.c
* Update keyboards/flx/lodestone/keymaps/default/config.h
* Update keyboards/flx/lodestone/rules.mk
* Update keyboards/flx/lodestone/readme.md
* Delete config.h
* Update keyboards/flx/lodestone/info.json
Suggested by noroadsleft
* Update keyboards/flx/lodestone/info.json
* Update keyboards/flx/lodestone/info.json
Changed maintainer name as suggested.
* Update keyboards/flx/lodestone/keymaps/default/readme.md
* Update keyboards/flx/lodestone/info.json
* Update keyboards/flx/lodestone/rules.mk
Changed Link_Time_Optimization to LTO didn't know this was a thing :)
* Update keyboards/flx/lodestone/keymaps/default/keymap.c
Removed 2 unessisary layers from the default map.
* Update keyboards/flx/lodestone/readme.md
* Update keyboards/flx/lodestone/info.json
* Changed from LAYOUT to LAYOUT_all
AS suggested by noroadsleft, changed 4 files to match, and re-testeed on my hardware to confirm working.
* Update keyboards/flx/lodestone/config.h
Cleaned up Manu, Product and Descriptor as suggested.
* Update keyboards/flx/lodestone/readme.md
* Update default keymap for Choco60
* Update keyboards/choco60/keymaps/default/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Assign unique VID to LazyDesigners' boards
* Add VIA support for LazyDesigners Dimple
* Apply @fauxpark's suggestions
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update switch to array to allow custom values
* Add adc keymap
* update docs to reflect alignment of default 10 bit
* start conversion to USE_ADCVn
* samplerate is hella wrong...stub out for now
* basic f1 and f4 functionality
* Tidy up current changes
* Restore old pinToMux function
* Add back sample rate for supported platforms
* F0 compile fixes
* wordsmithery
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Remove reference to avr only function
Co-authored-by: Ryan <fauxpark@gmail.com>
* add via keymap for doro67
* have more sensible VID and PID
* apply the same VIA changes to the regular PCB
* Update keyboards/doro67/rgb/keymaps/via/keymap.c
* Update keyboards/doro67/regular/config.h
* fix some formatting
* add via support for multi doro67
* added olkb_style layout for XD75
* removed unnecessary config.h
* cleaned up empty functions
* refactored fuction type for clarity
* renamed the layout
* Candybar: split lefty and righty into subprojects.
* Update readme.md
* Update readme.md
* Candybar: Moved STM32 library files into project root folder.
* Update keyboards/candybar/righty/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/candybar/righty/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/candybar/righty/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/candybar/righty/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/candybar/righty/righty.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Candybar: remove Boards directory so project uses one from drivers
* Update keyboards/candybar/righty/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update readme.md
* Update readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add new keymap with split right shift and split backspace for bananasplit PCB
* Remove unecessary config.h
* Remove unecessary line breaks
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Christopher Janzen <hello@christopherjanzen.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* feat(build): added script for compiling with docker easily
* chore: bring my own build with docker to master
* chore: delete a file that does not make sense anymore
* feat: first redox for danielo
* chore: basic compatibility between redox and my space
* refactor: removed some old stuff
* feat: added go coding symbols
* feat: name control_k and alt_j
* chore: reduce combo term
* feat: improved first layer of redox
* feat: add configurations to the redox
* feat: make alt tab more portable
* feat: small improvements to redox layout
* feat: added leader
* refactor: move leader defs to my userspace config
* chore: movement modified
* feat: more predefined keys and a a new combo
* feat: redox alt tab functionality
* refactor: move alt_tab processing to a separate file
* refactor: early return
* refactor: move process record to a separate file
* format leader function
* chore: backspace on digits layer
* feat: add extra combo
* feat: added more combos
* implement guard proposed by @drashna
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* chore: include @drashna placeholder suggestion
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Since #7773 caused a build error for `mxss:default`, I made similar changes to 'keyboards/mxss/rgblight.h' as #7773 did to 'quantum/rgblight.h'.
**This commit does not change the build result.**
Testing script
```shell
# build on versions earlier than PR #7773
git checkout 0.8.24
echo master > /tmp/master_md5.txt
make mxss:default:clean
make mxss:default
md5 mxss_default.hex >> /tmp/master_md5.txt
# build on this commit
git checkout fix-keyboards-mxss-rgblight.h
echo fix-keyboards-mxss-rgblight.h > /tmp/branch_md5.txt
make mxss:default:clean
make mxss:default
md5 mxss_default.hex >> /tmp/branch_md5.txt
diff -u /tmp/master_md5.txt /tmp/branch_md5.txt
```
Test result:
```
--- /tmp/master_md5.txt 2020-03-12 05:51:39.000000000 +0900
+++ /tmp/branch_md5.txt 2020-03-12 05:51:49.000000000 +0900
@@ -1,2 +1,2 @@
-master
+fix-keyboards-mxss-rgblight.h
MD5 (mxss_default.hex) = 3034b2504d0c7fc6bd8bf1dffb6b8486
```
* Initial commit of oddball keyboard
* Update oddball project url
* Update pointer functions to only run on master side
* Add unique product version
* Capitalise product name
* Convert oddball keymap layer flags to enum
* Remove commented keyboard boilerplate code
* Remove unused keymap config
* Fix incorrect layout in info.json
* Add markdown link text in readme
* VIA_ENABLE Tokyo60 PCB
* Update config.h
* Apply suggestions from code review
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* added Palette1202
* removed currently unused cords
* Update keyboards/palette1202/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update readme.md
removed unnecessary horizontal line from readme.md
* Update readme.md
Fixed style, make command example
* Removed spaces
* removed unused config.h
* fixed defines
* fixed send string on rotate encoder
* fixed layer numbers for OLED Display
* fixed to use existing function to set default layer
https://github.com/qmk/qmk_firmware/pull/7736#discussion_r366699616
* flipped rotary encoder directions
* Added layer for Clip studio on iOS
* Update keyboards/palette1202/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/palette1202/lib/oled_helper.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* is_master, has_usb() move to rev2.[hc]
* Do recent helix/rev2 changes to helix/pico as well.
helix/pico/matrix.c: remove 'is_master'
helix/pico/pico.c: add 'is_master'
helix/pico/pico.h: add 'has_usb()' macro
helix/pico/split_util.c: remove 'setup_handedness()' 'has_usb()', add 'is_helix_master()' etc
* add HELIX=scan option into {rev2/pico}/local_features.mk
Made DEBUG_MATRIX_SCAN_RATE easy to use.
* Changed rules.mk to link "helix/local_drivers/ssd1306.c" only when OLED_ENABLE = yes.
* Added option to use split_common for helix/rev2, helix/pico keyboard.
how to build:
### build helix/pico (HelixPico) with helix current codes
$ make helix/pico:KEY_MAP
$ make helix/pico/back:KEY_MAP
### build helix/rev2 (Helix or Helix beta) with helix current codes
$ make helix:KEY_MAP
$ make helix/rev2/back:KEY_MAP
$ make helix/rev2/under:KEY_MAP
$ make helix/rev2/oled:KEY_MAP
$ make helix/rev2/oled/back:KEY_MAP
$ make helix/rev2/oled/under:KEY_MAP
### build helix/pico (HelixPico) with split_common codes
$ make helix/pico/sc:KEY_MAP
$ make helix/pico/sc/back:KEY_MAP
$ make helix/pico/sc/under:KEY_MAP
### build helix/rev2 (Helix) with split_common codes
$ make helix/rev2/sc:KEY_MAP
$ make helix/rev2/sc/back:KEY_MAP
$ make helix/rev2/sc/under:KEY_MAP
$ make helix/rev2/sc/oled:KEY_MAP
$ make helix/rev2/sc/oledback:KEY_MAP
$ make helix/rev2/sc/oledunder:KEY_MAP
* add matrix_slave_scan_user() to helix/rev2/rev2.c, helix/pico/pico.h
* Changed 'helix:xulkal' to always use split_common and removed ad hoc code.
Added the following line to 'helix/rev2/keymaps/xulkal/rules.mk':
SPLIT_KEYBOARD = yes
Removed the following ad hoc code from 'users/xulkal/custom_oled.c':
#if KEYBOARD_helix_rev2
extern uint8_t is_master;
bool is_keyboard_master(void) { return is_master; }
#endif
* add '#define DIODE_DIRECTION COL2ROW' into helix/{rev2|pico}/config.h
This commit does not change the build result.
* update helix readme
* keyboards/helix/readme.md
* keyboards/helix/pico/keymaps/default/readme.md
* keyboards/helix/rev2/keymaps/default/readme.md
Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
* adding Handwired Skeeb Keyboard
* Apply suggestions from fauxpark
* Apply more suggestions from fauxpark and small change to layout
* Apply more suggestions from noroadsleft and last tap dance
* 15/16 game with lights for the super 16
* Updated readme with style
* adding comments and initial style to keymap
trying to make the code look prettier, need to test by redownloading
* Final style revisions before pull request
* formatting changes, removed config.h
* modified rules.mk, works with changes in PR8314
* formatting
no number of spaces is enough for a newline, whoops
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/1upkeyboards/super16/keymaps/15game/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/1upkeyboards/super16/keymaps/15game/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/1upkeyboards/super16/keymaps/15game/keymap.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Sam Reinehr <swreinehr@mines.edu>
Co-authored-by: Ryan <fauxpark@gmail.com>
* add VIA support for neuron
* update neuron vendor and product id
* update neuron product id
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Added more led helpers
* Working keymap
* Added new mouse button an made lower layer toggleable
* Small improvement to process_record_user
* Removed extra layer buttons
* Added Numpad to apply layer
* Moved buttons and added toggle for raise button
* Added Menu,PrintScreen and Windowslock buttons, and left handmouse
* Fixed Scroll Buttons
* Turned TAPPING TOGGLE to 2
* Switched Del and Ctrl on left hand
* Added Home Button to Mouse layer
* Fixed led initialization to avoid red led on boot
* Updated formatting to follow guidelines
* Used enums instead of defines and used layer_state_t type
* Added license
* Moved TAPPING settings to keymap config
* Fixed small formatting issue in keymap.c
* Use GPIO Control instead of lowlevel ports
* Add Colemak layout
* Add status bar for mods & locks with a custom font
* Swap DEL and TAB
* Fix media keys and add QMK Configurator layout
* Add dead grave accent on <leader>e
* via configurator can't do AG_TOGG with any key - meh
* same issue - via can't do AG_TOGG
* oops - missed AG_TOGG on the NK65
* add media and mousekeys
* Update keyboards/nk65/keymaps/madhatter/keymap.c
* refactor yd60mq.h
- four-space indent
- use K<row><col> base32hex notation
- rename LAYOUT to LAYOUT_all (with alias for backwards compatibility)
* refactor yd60mq.c to use led_update_kb()
* align rules.mk to AVR template
* refactor default keymap
Also correct positions for KC_NUHS and KC_NUBS.
* update readme
* add Configurator layout support
* initialize the Caps Lock LED pin properly
* Keymap Update
Some key codes have been updated.
naked64:salicylic
7skb:default
* Keymap Update
Some key codes have been updated.
KC_GRAVE to KC_GRV
7skb:default
* Initial commit of majbritt
* Add QMK and VIA support to majbritt
* Change vendor and product id
* Change name
* Change make path
* Move Majbritt into sidderskb directory
* Update keyboards/sidderskb/majbritt/majbritt.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/sidderskb/majbritt/keymaps/default/config.h
Co-Authored-By: Ryan <fauxpark@gmail.com>
* remove unused file
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Change include guards to pragma once
* Clean up default keymaps
* Remove some magic numbers and use GPIO macros
* Clean up keyboard.[ch]
* Tidy up info.json and readme
* Align config.h with template
* Split up revision code into subfolders
* rev C-H has no audio, apparently
* Change revc_h to revc and document differences
* Turn off Audio on revb for now, for Travis' sake
* Split info.json into revision folders
* Clean up default keymaps some more
* to ease the maintenance for some boards ibnuda has.
* followed ridingqwerty's suggestion on 8821.
* folloing drashna's suggestion on qmk's 8221.
* following drashn's suggestion on qmk's 8211
* Keyboard: revamp frosty-flake leds
This commit transitions bpiphany/frosty_flake to led_update_{kb,user}
and rewrites the AVR bit twiddling logic to use the standard QMK GPIO
API.
* Keyboard: rewrite frosty_flake's matrix reader to be a lite custom matrix
This commit replaces frosty_flake's custom matrix and debounce logic
with a "lite" custom matrix. In addition to being somewhat clearer, this
allows a consumer of the flake board to choose their own debouncing
algorithm. The one closest to the implementation originally in use is
sym_g, but this opens us up to supporting eager_pk and eager_pr.
The original matrix code was 18 columns for 8 rows, but using a single
row read and unpacking the bits into individual columns. To simplify,
I've changed the key layout to be 8C 18R instead of 18C 8R: this lets us
use a single read directly into the matrix _and_ drop down to a uint8_t
instead of a uint32_t for matrix_row_t.
Since we're no longer implementing our own debouncing and row unpacking,
we save ~400 bytes on the final firmware image.
Fully tested against a CM Storm QFR hosting the flake -- this commit
message was written using the new matrix code.
Firmware Sizes (assuming stock configuration as of 42d6270f2)
Matrix+Debounce Size (bytes)
--------------- ------------
original 17740
new + sym_g 17284
new + eager_pr 18106
new + eager_pk 18204
I expect that there are some scanning speed benefits as well.
* Keyboard: update frosty_flake's UNUSED_PINS
* Keyboard: Remove meaningless weak redefinitions from frosty
These are not necessary (and all of them already live somewhere in
Quantum).
* Add VIA support for Prime_L
* Update keyboards/primekb/prime_l/v1/config.h
* Add prime_exl_plus keyboard
* Temporary removal of prime_exl_plus
* Add Prime_EXL Plus, including VIA support
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/rules.mk
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keymap.c
* correct spacing of keymaps and layout macro. move indicator logic from user space to keyboard space
* further corrections to keymaps and layout macro.
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update prime_exl_plus.c
* small edit to prime_exl_plus.c
* Add via support to Prime_M and clean things up
* Update rules.mk
* Update keyboards/primekb/prime_m/readme.md
* Update keyboards/primekb/prime_m/readme.md
* Update keyboards/primekb/prime_m/config.h
Including the `xB` suffix prevents qmk_compiler (and thus QMK Configurator) from compiling firmware for the Wete.
Rolling this change back until we work out a long-term solution for the suffixes.
* Add VIA support for Prime_L
* Update keyboards/primekb/prime_l/v1/config.h
* Add prime_exl_plus keyboard
* Temporary removal of prime_exl_plus
* Add Prime_EXL Plus, including VIA support
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/rules.mk
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keymap.c
* correct spacing of keymaps and layout macro. move indicator logic from user space to keyboard space
* further corrections to keymaps and layout macro.
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update prime_exl_plus.c
* small edit to prime_exl_plus.c
* [Keyboard] Add Wete
* Fix width and height in Wete info.json
* Use default board files, core backlight, and disable RTC
* Disable I2C, SPI. Minor corrections
* Keymap typo update
* Add LAYOUT_all to info.json
* Remove extra spaces in README, delete matrix_*_kb functions
* Fix layout errors in wete.h, and some minor corrections
* Actually fix LAYOUT_all in info.json
* move lighting code from VIA into the keyboard's .c file so that every keymap can access it
* after some serious conversations with default and wkl, they agreed to let me modify their keymaps. They weren't too happy
* add a VIA keymap for kbd75
* rev2 is a completely different pcb allowing a NEW layout, setting this to have a different product id so users don't get confused when they're able to enable numpad layout on rev1 VIA
* Update keyboards/kbdfans/kbd75/rev1/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/kbdfans/kbd75/rev2/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Added custom keymap
* Update keyboards/preonic/keymaps/elisiano/keymap.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Address PR comments and added CTL_T(KC_ESC) on other layouts as well
Co-authored-by: Ryan <fauxpark@gmail.com>
* correct indicator light states.
function of indicator lights was inverted. these changes correct that.
* flesh out keymaps pre production
* Enable extrakey in rules
* Prime_BLE initial commit
* Initial commit for Prime_L V2
* Update info.json
correct key spacing.
* update copyright
* Update readme.md
* Inital commit
* updates before PR into QMK master
* Drop Prime_EXL Plus from PR. Make requested changes to Prime_L V2
* Rename keyboards/primekb/Prime_l_v2/config.h to keyboards/primekb/prime_l_v2/config.h
* Rename keyboards/primekb/prime_l_v2/config.h to keyboards/primekb/Prime_l_v2/config.h
* remove directory Prime_l_v2
* re-submit with proper folder name.
* Restructure /primekb directory to merge /prime_l and /prime_l_v2
* made changes requested by QMK reviewers
* Update keyboards/primekb/prime_l/v1/readme.md
* Update keyboards/primekb/prime_l/v1/readme.md
* Update keyboards/primekb/prime_l/v1/readme.md
* added via keymap for kbd8x mkii
* adding via to kbd8x mk2
* modified via kbd8x mk2 keymap
* enable LTO kbd8x mk2 via keymap
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* removed backticks kbd8x mk2 via keymap
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* coding style cleanup, enable/disable misconfigured/broken features
* add SCLN missing, compile with backlight PWM warning
* edit json
* new info.json from KLE
* new info.json from KLE using QMK converter
* changes notes
* notes in pull request
* missing line in comments
* line wrap
* Update keyboards/kc60se/config.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/keymaps/default/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/rules.mk
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* comment back in rules.mk
* add 2 iso layouts and keymaps, 1 ansi kemap, compiled and tested
* keymaps and info
* Delete keymap.c
not ready, I need to get a few iso characters corrected
* Delete keymap.c
not ready, need to get a few iso character define correctly
* Update info.json
Bspc to Backspace
* no unicode
* gui_on and gui_off in readme
* Update keyboards/kc60se/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* remove is_command
* Update keyboards/kc60se/config.h
remove comment
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kc60se/config.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* remove \\ in keymaps
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* set led pin b2 to output mode in matrix_init_kb(), toggle it in led_update_kb()
* Update config.h
I had commented FORCE_NKRO out.. WHy did it com back?
Co-authored-by: Check your git settings! <chris@chris-laptop>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* [keymap] ninjonas keymap updates
* [refactor(kyria)] updating keymap for numpad layer to be transparent rather than ignores
* [keymap(lily58)] added numpad layer
* [keymap(crkbd)] added numpad layer activated through tapdance
* [fix(8170)] fixing code review changes requested by noroadsleft
* [fix(8170)] updating comments and .md files to use 'Cmd' instead of and ⌘
Clean up checks and logics that are unnecessary due to MILC updates.
Use pathlib instead of os.path for readability.
Use the 'pytest' keyboard for the tests.
Add community layout for 'handwired/onekey/pytest' so we can test
community layouts.
* Adding VIA support for 40percentclub/luddite
* Update config.h
* Update rules.mk
* Delete config.h
config.h was created to override the "default" of RGBLED_NUM 8
deleting the file to keep with defaults
* Removing block and comment as suggested
* Update PRODUCT_ID
Changing from:
#define PRODUCT_ID 0x0A0C
To:
#define PRODUCT_ID 0x4C55 // "LU"
* Changing Vendor ID
Changing Vendor ID from:
#define VENDOR_ID 0xFEED
To:
#define VENDOR_ID 0x3430 // "40"
* VIA support for Think6.5
* VIA support for Think6.5 Hotswap
* VIA works better with separate layout options
* Remove the colours used to help develop it in KLE
* Pay better attention to the JSON linter
* Update Think6.5 PRODUCT and remove VIA JSON defs
* VIA Support for the Idobo (ID75)
* Implemented the requested PR changes
* Readme was pointing to the wrong board
* Fixed Product ID
* Fixed Manufacturer name
* Better Vendor ID
Using the two 8-bit ASCII values from the keyboard name.
* Removed Bootmagic Lite as enabled anyway by VIA
* initial commit of VIA Support
* update PRODUCT (and MANUFACTURER) per VIA docs
Reference: https://caniusevia.com/docs/configuring_qmk#change-product
Updated MANUFACTURER so it matches what the PRODUCT says.
* enable Link Time Optimization per mechmerlin
* revert change to USB Product Name
* add two empty layers to via keymap
VIA keymaps need four layers in flash.
* correct the layer indexes
Start from 0, not 1.
* Drop in old files
* Make a blank template keyboard to refresh ancient files to latest config
* Update keymaps files to new format
* Remove chunks of config asked for removal in previous pullreqs
* Remove split pin option from config
* Update rules.mk to latest version
* Remove unused functions from polaris.c
* Add via keymap
* Build basic tsangan keymap; add QMK configurator info
* Remove temporary template
* Update keyboards/ai03/polaris/config.h
* Update keyboards/ai03/polaris/readme.md
* Update keyboards/ai03/polaris/readme.md
* Update keyboards/ai03/polaris/readme.md
* Update rules.mk
* Fixes as per pullreq
* Update keyboards/ai03/polaris/keymaps/default_ansi_tsangan/keymap.c
* Update keyboards/ai03/polaris/polaris.h
* Update keyboards/ai03/polaris/keymaps/default_ansi_tsangan/keymap.c
* Update keyboards/ai03/polaris/info.json
* Update keyboards/ai03/polaris/keymaps/testing/readme.md
* refactor keymaps
Create one keymap for each layout macro.
* remove config.h for default keymap
There's nothing in it.
* update readme
- use the new list format
- use a smaller version of the keyboard photo (does the readme really need a 14MP image on it?)
* correct indicator light states.
function of indicator lights was inverted. these changes correct that.
* flesh out keymaps pre production
* Enable extrakey in rules
* Prime_BLE initial commit
* Initial commit for Prime_L V2
* Update info.json
correct key spacing.
* update copyright
* Update readme.md
* Inital commit
* updates before PR into QMK master
* Drop Prime_EXL Plus from PR. Make requested changes to Prime_L V2
* Rename keyboards/primekb/Prime_l_v2/config.h to keyboards/primekb/prime_l_v2/config.h
* Rename keyboards/primekb/prime_l_v2/config.h to keyboards/primekb/Prime_l_v2/config.h
* remove directory Prime_l_v2
* re-submit with proper folder name.
* houndstooth
* Amended with collaborator suggestions
* LAYOUT fixup, left crud in keymap
* Fix missing comma in keymap.c
* Correct RGBLIGHT_ENABLE to no
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
* YMDK NP21: matrix and keymap refactor
- refactored layout macros
- LAYOUT_ortho_6x4 orients the keyboard with the USB port to the back instead of to the right
- LAYOUT uses the previous sideways orientation (included for backwards compatibility)
- removed redundant includes from ymdk_np21.h
- added a readme for the default keymap
* add Configurator layout support
* fix layout macro and update keymaps
K2D switch position is actually physically on the top row, as the right half of a split Backspace.
* add QMK Configurator layout support
* Adding my keymap
Adding a personalized keymap to the Raine keyboard. This diffirentiates itself by being useble with nordic characters even when the bottom row has blockers. Also added ASCII art to help visualize what you are doing when programming the board.
* Update Readme.md
Ned image of the board
* Update Readme.md
Forgot a space in Readme
* Update Readme.md
And another missed space
* Update keymap.c
Renoved Definetion that is not used
* Update Readme.md
* Remove files for renaming
* Adding files after renaming
Was unable to get Girthub to push renamed files/folders. Therefore removeing and adding them again.
* add the via keymap
* get an appropriate unused VID
* fix formatting up a bit
* Update keyboards/kbdfans/kbd67/mkiirgb/v1/config.h
* Update keyboards/kbdfans/kbd67/mkiirgb/v2/config.h
* new alternative controller.
* following suggestions at qmk's 8059.
* forgot to replace some underscores and keycodes.
* following drashna's suggestions at qmk's 8059.
* following zvecr's suggestion in qmk's 8059.
* following noroadsleft's suggestion at qmk's 8059.
* [keymap(kyria)] moved OLED & encoder implementation to separate classes
* [feat] created logic to cycle through hue wheel when starting keyboard
* [feat] created logic to cycle through hue wheel and return to user's default color
* [refactor] updating OLED layout for crkbd & lily58
* [refactor] updating OLED layout for crkbd & lily58
* [fix(8070)] updating encoder.c logic based off drashna's code review
* [refactor(8070)] added key to send + Shift + M
* disable Console to save firmware space
* rules.mk templating
Add comments regarding the rules, to more closely match the ps2avrgb template.
* update info.json
This board has a quite interesting take on the standard TKL; why not show it off?
* update the vendor id for 1upkeyboards 1up60hte
* add the via keymap and rules file
* fix typo
* move the LTO to the keyboard's rules.mk
* Update keyboards/1upkeyboards/1up60hte/config.h
* Created the yoryer layout for the Quefrency 65%
* added rgb control layer
* Required changes to resolve PR #7947 issues
* - Updated the layer list as an enum
- Removed .gitignore file from keymap folder
* Removed the .gitignore from keymap folder
* Begin work on spfs, migrating ancient config
* QMK breaks if there's a dash in the board name
* Update info.json
* Make indicator LEDs work
* Build a readme
* Change title to match official GB thread name
* Add an ANSI WKL layout for simplicity
* Adjustments as per pullreq recommendations
* Remove unused functions from other keymap
* Add backlight custom driver to all boards not declaring it but overriding backlight
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove old tmk references from show_options.mk
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Add initial configuration and keymaps for Yatara Drink Me.
* Apply suggestions from code review
* Apply suggestions from code review
* Add transparent layers in VIA layout so there are four layers in total. Amend closing bracket indentation in keymap.c files.
* Add the Whitefox vanilla layout
Initial commit for whitefox vanilla keymap
Fix the mapped layout to match vanilla
Cleanup vanilla default
Rework the info file
Remove vanilla keymap as we don't really need this
* adds to theDora readme for more explicit directions on flashing,
with links and how to enter bootloader mode.
* fmt
* Corrects language of steps for loading firmware
* Update keyboards/ckeys/thedora/readme.md
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files
* Correct some 'rules.mk' in boards buried under vendor folders
* PR8027 patch
Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add German programming layout for Lets Split
* Update copyright in config.h
* Add Hash-Symbol to keymap
* Change to fit suggestions in PR
* Changes as requested, but broken.
* Fix layer switching issue
* Add Quefrency Rev. 2
* Add encoder support
* Add RGB LED mapping info
* Add diode direction
* Revert removal of default folder for CI purposes
* Remove unneeded lines
* Rename ISO layout macros
* add VIA support for 1up60hse
* choose a vendor and product id that is not taken
* add mousekey_enable set to no as per Wilba's recommendation
* Update keyboards/1upkeyboards/1up60hse/keymaps/via/readme.md
* Update keyboards/1upkeyboards/1up60hse/keymaps/via/readme.md
* add a fourth layer
* might as well remove the config file as we are not including the one thing that was in it
* Fix Pulse4k info.json LAYOUT name
* Add missing functions to fix configurator
Add empty encoder functions to the keyboard code, as the configurator doesn't see the keymap defined functions at first.
To be able to override these functions, they are marked as 'weak'.
* Rework encoder functions another time
Default implementation is now provided as part of the keyboard, but they can still be overriden within the keymap (template is commented out by default)
* Reworked for VIA support
Reworked for VIA support and tidying up of older code.
* Fixed naming issues, and prepared for VIA compat
Via compat added
* Improve layouts, tidy code, via keymap
Added support for VIA and cleaned up some code and layouts.
* Implimented suggestions by MechMerlin
* Fix capitalisation
Mistake raised by Drashna now fixed.
* Tidy comments as requested by noroadsleft
* Tidy comments as requested by fauxpark
* feat(build): added script for compiling with docker easily
* chore: bring my own build with docker to master
* feat: merge ergodox ez into latest maste
* chore: remove my build with docker file
* chore: remove my changes to process_leader
* feat: more modular user danielo515
* Apply suggestions from @ridingqwerty
Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com>
* chore: more suggestions implemented
* chore: add my basic details
* Apply suggestions from @drashna
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* fix: more @drashna fixes
* feat: @fauxpark optimization
* fix: some more @drashna improvements
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* chore: small improvement on layout
* fix: some more @drashna improvements
* chore: remove some F dance
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Ensure setPinInput actually sets input high-z
* Fixed _PIN_ADDRESS Macro arguments
as recommended by vomindoraan
* Fixed instances of setInput to use new behavour
* Changed kmac matrix to use input with pullups
* Update keyboards/gh60/revc/revc.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fixed input state for unselect_rows
* fixed merge conflict
* Updated all instances of older uses of setPinInput()
* Fixed naming mistake
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Add VIA support to mxss and general cleanup
* Add support for RGB test for FLEDs
* Add LAYOUT_all to allow for more configuration
* Remove blank layers
* Updated readme
* Improve use of EEPROM
* Credit where its due
* Use the latest iteration of rgblight code
* Keep the RGB timer running if the front LED is in RGB mode
* Fix RGB breathing animation
* Better supported RGB animation
Only thing not working is alternating, but that's not too important
* Abstract front LED handlers from main kb code
* Add support for indicator LED color changing
* Remove debug statement
* Persist indicator LED colors
* Mark custom sections in rgblight.c
* Light commenting
* Fix up keymaps
* Add/update comments
* Remove bloat from default hex
* Tidy a stray tab
* Out with the old, in with the new
* Out with the old, in with the new
* Add LAYER_STATE_8BIT for VIA keymap
* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output
* Added missing readme
* Oled Timeout Update for KidBrazil Keymap (#1)
* Setup Oled timeout based on simple timer
* Cleaned up comments and added timeout for LEDs
* Fixed some small errors
* Updated oled timout with matrix scan
* Updated oled timout with matrix scan
* Update withou eeprom
* Update timer code
* Use process user instead of keymap
* Added ifdef to protect oledtimer
* Updated with half timeout state for logo
* Removed middle tier timer
* Final cleanup of unused files
* Updated code as per suggestions & requests
* Second round of revisions
* Updated keymap to better handle LED timeout
- Added boolean to hold LED state
- Added init function to set rgb to known state
- Modified RGB_TOG to work with noeeprom commands
* Finished adding the timeout for OLED and testing on CRKBD
* Updated documentation
* fixed the timeout logic so it works as intended
* Added initial limits to color settings
* Added layer reset as part of the iddle timeout process
* Split Keymap into more manageable files
* Finalizing RGB Layer status on CRKBD
- Refactored OLED timeout to deal only with oled
- If user remains iddle on game layer for too long it will switch to
default
- LED / OLED iddle working
- Minor changes to _SYM layer
- Removed some rgb controls from keyboard due to layer dependent RGB
colors
* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c
Used suggestion from Drashna to replace EEPROM_RESET with shorter version.
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Implemented drashna's comment
Co-authored-by: Drashna Jaelre <drashna@live.com>
* fix audio enable repetition
* remove RGB LED support as this board has no RGB LB LEDs
* use pragma once
* this board has no backlight support
* enable COMMAND_ENABLE
* comment cleanups
* setting bootmagic to lite as the first board thathat has this PCB has a solid bottom. If someone forgets to put in a RESET key on their keymap, they are not going to have fun resetting the board
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* convert the palset and palclear routines to setpinoutput and writepinlow
* remove scankb
* restore original guards instead of pragma once
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Swap two cols to fix skog lite
* Fix readme
* Suggested formatting
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* both backspace and left shift matrix positions off by one
* update the led_update routine
* update readme
* Update keyboards/gray_studio/think65/solder/solder.c
* Add DZ60 to VIA
* Changed vendor id from 'KF' to 'DZ'
* Capitalize hex
* Fix Via_layout_options size setting
* Update keyboards/dz60/keymaps/via/rules.mk
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* WIP do not merge
* first pass at custom preonic layout
* add auto shift and reset via leader key
* Update readme
* update copyright notice
* formatting changes
* fix: use MO instead of process_record_user
* added backslash and moved grave position
* remove extraneous 'j' characer in NUMPAD template
* update template formatting
* remove process_record_user
* swap "!" with "@"
* fix readme formatting
* update readme layout image
* Add mx5160 keyboard
* Make necessary changes for merging
rules.mk cleanup, QMK's built in alias for KC_TRNS and change readme blurb
* Add info.json as well
* Update readme, info.json
* Change layout name, update led function
* Fix info.json
* Update rules.mk
* Remove custom backlight code for PS2AVRGB boards
* Remove custom driver setting
* BACKLIGHT_BREATHING goes in config.h, not here
* Don't need to include backlight.c again here either
* Turn on backlight for Canoe
* Disable console on a few boards due to oversize
* Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards
* Define diode direction for failing boards
* Matching parentheses
* Put onekey diode directions in top level config
* Initial commit
* Modified keymap and updated readme.
* fixed numbering in readme
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Made requested changes in PR.
* Rename README.md to readme.md
* swapped media control keys
* updated right alt key to apply shift key for emacs
* updated R_Alt to remove shift
* Updated readme
* add layout 2 and rename existing folder to layout 4
- renamed existing folder with directional layout to layout 4
- udpated existing readme
- Added layout_60_2
* update flash script per pull request review
* Added keymap profile to space65
- This keymap profile is for MacOS with VIM key bindings
- See readme for more information
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* remove unnecessary code from keymap
* updated keys and cleaned up readme
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
On the v1.2 PCB the slave half leds go in reverse order compared to the master half.
With this change, the leds are all in order from left to right, so animations like
Knight Rider look like you'd expect.
* ISO UK layout for Graystudio Space65
* Quick line on how to build it in the readme
* Update ASCII art layout guide to match reality
* Whoops, space is actually K47, not K46
* Rename to 65_iso_blocker and remove uk designation
* RGB config overhaul
Changing RGB config from setrgb to sethsv, trying out different color values.
* Merged changes
* Various changes and a couple additions
Added Git Layer with git macros for most operations and LED config to show the macro keys on layer. Activated with FN+3.
Added VIM Layer, this is a normal keycode layer with no macros for now but it has LED config that highlights the navigation and edit keys in VIM.
Added a sticky CTRL and sticky SHIFT layers. I have no idea why I did this actually, it's mildly useful but oneshot and tapdance would be better, will be removed in later commit.
Changed the LED config from setrgb to sethsv and the key by key LED config to array.
Some code improvements in process_record_user.
Better way to manage string macros using char array. Inspired by drashna's secret macros.
* Various keymap changes and added documentation
Updated massdrop/ctrl endgame keymap:
Added layers for git and vim.
Better LED config method, using ledmap, similar to what's used in many other keymaps.
Improved process_record_user() mainly with reduced conditionals.
Cleaned things up in the header and config.
Added pretty much all qmk feature headers to rules and config, commented out to be enabled if desired. Firmware size should be considered.
Not many features added in this commit. Shifting for a while to work on implementing raw hid for the keyboard and expanding qmk terminal.
Added documentation.md for massdrop/ctrl at keyboard level to house all related information for future use.
Added documentation for raw hid in docs, added the doc to feature index. Need some review for this documentation and suggested additions/changes.
* Some fixes
Fixed keymap documentation to include changes.
Removed useless double tap keys and simplified layer maps.
* Fixed error in keymap
* Removed documentation changes. Will present in another PR
* Update keyboards/massdrop/ctrl/DOCUMENTATION.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update DOCUMENTATION.md
* Update keymap.c
fixed mouse layout incomplete arrow cluster
* Update keyboards/massdrop/ctrl/keymaps/endgame/keymap.c
Fixed Git layer led config
Co-Authored-By: totolouis <totolouis@users.noreply.github.com>
* Update DOCUMENTATION.md
Remove raw hid details
* Update rules.mk
Remove useless stuff
* fixed malformed led map causing compile fail, indentation fixes
* Update keyboards/massdrop/ctrl/keymaps/endgame/config.h
switch from TG_NKRO to NK_TOGG
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keymap.c
Switching from TG_NKRO to NK_TOGG
* Added yakuake layout
* Update keyboards/massdrop/ctrl/keymaps/endgame/keymap.c
Change biton32(layer_state) to get_highest_layer()
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keymap.c
Change from biton32 to get_highest_layer
* Fixed custom LED not toggling off
Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: totolouis <totolouis@users.noreply.github.com>
* Initial commit of HHKB layout.
* Moved keymap to the correct location.
This keymap is for a hasu alt controller-equipped HHKB, so the keymap was in the wrong place.
Added comments to the keymap.
* Add files via upload
* Rename keyboards/kbdfans/kbd67/rev2/keymaps/keymap.c to keyboards/kbdfans/kbd67/rev2/keymaps/adi/keymap.c
* Rename keyboards/kbdfans/kbd67/rev2/keymaps/readme.md to keyboards/kbdfans/kbd67/rev2/keymaps/adi/readme.md
* Update readme.md
* Update readme.md
* Update keyboards/kbdfans/kbd67/rev2/keymaps/adi/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kbdfans/kbd67/rev2/keymaps/adi/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kbdfans/kbd67/rev2/keymaps/adi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Tidy up dztech keyboard.c/h and readmes
* Use new lock LED function
* Undo changes to led flags
* Fix make examples
* Update readmes some more
* Clarify filetypes
* Format as list
* Add minitomic keyboard
* Small change to readme
* Make changes necessary for merging
Remove extra comma in info.json, move caps lock led status from keymap to keyboard, removes unused keys on full space bar layout, cleans up rules.mk and update readme blurb.
* Update readme.md
* Update led function, fix spacing and remove custom keycodes
Removes the custom keycodes in default keymap, fixes spacing in keymap and minitomic.c and puts the new led function in as well
* Keyboard: add treeadstone48
* rename layout defines
* Use of pragma once
* move common include code
* fixed info.json
* change keymap layout from kc to normal
* fix alpha revision keymap
* fixed info.json
* remove USE_Link_Time_Optimization
* I re-created treastone48 keyboard firmware from ./util/new_keyboard.sh
After that I use common OLED_DRIVER, RGB_LIGHT and SPLIT_KEYBOARD options.
And then check all keymap.
* Modified by PR review
* Basic functionality to synchronize the strings and enums using C preprocessor macros.
* Updated all the custom convenience macros to work.
* Removed some duplicate update_tri_layer calls.
* Simplified the convenience accelerator macros for synchronizing enums and strings by removing the short enum names.
* Updated the CUSTOM_MACROS macro to use SS_LCTL instead of SS_LCTRL.
* Fixed a bug where the right side of the convenience layer in the Iris keymap was incorrectly listed twice.
* Removed the tenkey from the convenience layer. Added Windows 10 virtual desktop shortcuts to the convenience layer.
* Fixed a bug where the macro range was not set correctly.
* Added sigil values for the keycode enum so that additions to the sync macros will not require changes to the process_record_user ranges.
* Hacked send_string_P to work with ChibiOS boards.
* Switched to using I2C for the Iris keyboard.
* Finished a comment.
* Updated comments to explain that for non-AVR MCUs, the PROGMEM macro doesn't do anything.
* Updated the synchronization macros to use the more descriptive "NAME" instead of "CALL". Moved the Control-Alt-Delete chord macro to the synchronization macro.
* Simplified the custom macros by consolidating the macros into a context change macro instead of using alt-tab and minimize macros.
* Fixed a formatting issue where several tabs were used instead of 4 spaces.
* Added more comments to explain the synchronization macros.
* Simplified the PARAMS macro, since any parameters could be passed with a space by the declarer instead.
* Consolidated the synchronization macros into a single list. Simplified the synchronization mechanism.
* Removed the overloading macro, since it is no longer needed.
* Updated the convenience layer comments to reflect the changes made.
* Renamed the git_macros pointer table to custom_macros, since it no longer solely consists of git macros.
* Clarified that the send_string_P function's use of pgm_read_byte is different for AVR and non-AVR compilation targets.
* hope this works
* Some new things crept in
* remove nonsense config file
* spacing fix
* more spacing
* quick revert of mysterious file
* file revert take two
* take three
* take four
* deleted unneeded lines
* brought back not-unneeded line
* whitespace delete
Updates the example make commands in the Levinson readme to
keebio/levinson/... instead of levinson/...
Also updated the example to rev3 (the current version of the board)
* Add: RGB underglow support using SPI to SteamVan and CO60
* Update: Switch to QMK's baclight implementation for CO60 and SteamVan
* Fix: Remove now unnecessary backlighting code from keyboard files
* initial commit from script
* edit all generated files with my name and some basic notes
* implement RGB Matrix support
* cleanups, file removals, and readme edits
* Update keyboards/bm60hsrgb/config.h
* rename to bm60rgb
* update included library and info.json keyboard name
* Update keyboards/bm60rgb/keymaps/default/readme.md
This code is timing sensitive and seems to break with LTO enabled (at
least on avr-gcc 8.3.0... it worked on older gcc versions).
This is the same workaround as #7558 applied for the Helix.
* Adi's DZ65RGB layout
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Rename layers.JSON to layers.json
* Update readme.md
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Delete layers.json
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Rename keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md to keyboards/dztech/dz65rgb/keymaps/adi/readme.md
* Rename keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/keymap.c to keyboards/dztech/dz65rgb/keymaps/adi/keymap.c
Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Nk65 Refractor
- Changed Via keymap to via instead of default_via
- Moved Caps/Layer indicator code outside of wilba_tech rgb. This is so they can more easily be modified
* Update keyboards/nk65/nk65.c
* added ymdk ymd09 keyboard
* lowercase github username
* change rgb keymap to make more sense
* fixed number of LEDs
* remove configuration for non-existant backlight
* use official template and change file permissions
* disable unnecessary nkro
* Apply suggestions from code review
Co-Authored-By: Joel Challis <git@zvecr.com>
* with easy reset via bootmagic lite, remove RESET from layout
Co-authored-by: Joel Challis <git@zvecr.com>
* make vendor folder for idb keyboards
* set default debounce to eager_pk, clean up vendor/product ID
* refactoring for VIA
* made changes to support latest release of VIA, added default keymap that's in line with the most popular configuration
* Made suggested formatting changes
* rebase to get rid of lufa files
* removed idb_60.json that's only meant for via itself
* Update keyboards/idb/idb_60/keymaps/via/rules.mk
* Update keyboards/idb/idb_60/readme.md
* Update keyboards/idb/idb_60/readme.md
* Update keyboards/idb/idb_60/readme.md
* Update keyboards/idb/idb_60/rules.mk
* Update keyboards/idb/idb_60/config.h
* Update keyboards/idb/idb_60/readme.md
* made suggested formatting changes
* fixing lufa
* Update keyboards/idb/idb_60/rules.mk
* Update keyboards/idb/idb_60/config.h
* made suggested changes
* refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072'
* refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042'
* refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103'
* add readme to each of the mkii versions
* update the most parent of kbd67 readmes to have history of the new versions
* fix up the parent readme for the two types of boards
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* fixup readmes
Co-authored-by: fauxpark <fauxpark@gmail.com>
* fixed hhkb keymap issue and added allleds configuration
* fixed layout mismatch
* add more matrix control
* remove redundent define in rules.mk
* turn NKRO on
* remove allled macro, adding readme in allleds mode, add via support
* add two more layers for via
* update readme file
* Update keyboards/exclusive/e6_rgb/keymaps/allleds/readme
* Update keyboards/exclusive/e6_rgb/keymaps/allleds/readme.md
* add VIA support to Kyuu
* update keymap file to follow indenting guidelines
* add missing newline to rules.mk
* remove unnecessary backslashes and reindent default keymap
* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output
* Added missing readme
* Oled Timeout Update for KidBrazil Keymap (#1)
* Setup Oled timeout based on simple timer
* Cleaned up comments and added timeout for LEDs
* Fixed some small errors
* Updated oled timout with matrix scan
* Updated oled timout with matrix scan
* Update withou eeprom
* Update timer code
* Use process user instead of keymap
* Added ifdef to protect oledtimer
* Updated with half timeout state for logo
* Removed middle tier timer
* Final cleanup of unused files
* Updated code as per suggestions & requests
* Second round of revisions
* Updated keymap to better handle LED timeout
- Added boolean to hold LED state
- Added init function to set rgb to known state
- Modified RGB_TOG to work with noeeprom commands
* Finished adding the timeout for OLED and testing on CRKBD
* Updated documentation
* fixed the timeout logic so it works as intended
* Update keyboards/crkbd/keymaps/kidbrazil/README.md
* fix ANSI layout macro reference
* update ISO layout macro and enable 65_iso community layout support
- rename to LAYOUT_65_iso (with LAYOUT_iso alias for backwards compatibility)
- rename position k2c to k1d (electrical position)
* rules.mk templating
* tada68.h: use #pragma once include guard
* config.h: use #pragma once include guard
* make product id unique
* update info.json
* update readme
* cleanup default keymap
- keycode alignment
- layout macro reference
- four-space indent
* remove matrix_*_user functions from tada68.h
* Left-right gradient.
* Update the comment to match the new functionality.
* CPP does integer division so this round is not necessary.
* The x-range is actually 224, update comment and use bit-shifting again.
* Update docs with gradient left-right effect and associated "DISABLE" option.
* hope this works
* TF working with userspace
* rules for tf
* Fixed changed default files
* delete old keymap
* revert tf68 default to default
Co-authored-by: Akaash Suresh <casa.akaash@gmail.com>
* Add an 65_ansi community layout
- fix quoting because of comma in config.h
* Enable LAYOUT_65_ansi for tada68
* cleanups
* Update keyboards/tada68/tada68.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-authored-by: fauxpark <fauxpark@gmail.com>
* ifdef rgb stuff like a madman for RGB Coexistance
* Re-enable RGB Light on Planck
* fix RGB Coexistance issue
* Tweak feature settings for Ergodox EZ Glow
* Their powers combine, and I am Captain RGB
This one is for noroadsleft and yan.
* Limit brightness when both RGB features are enabled
* Change shutdown method
* Add RGB Coexistience stuff to keymap
* disable RGBLIGHT_SLEEP until a solution can be found
* Disable Unicode on the kyria
* Fix up Iris rev defines
* Fix up community layouts to compile properly
* Cleanup rgb stuff
* Merge ergodox keymaps
* Update CCCV macro to use tap_code16
* Enable Solenoid on C39
Because josh couldn't
* Enable RGB Light, not Matrix on rev6 keymap
* Only enable LTO on non-ARM boards
* Clean up Bootmagic OLED display
* Enable RGBLIGHT_SPLIT on kyria
Not that it does anything
* Add hotkey for discord
* Add support for Red Scarf I numberpads
* update info.json for configurator
* Update keyboards/redscarf_i/redscarf_i.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/redscarf_i/redscarf_i.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/redscarf_i/redscarf_i.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/redscarf_i/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/redscarf_i/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/keymaps/4x5_ortho/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/keymaps/4x5_ortho/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/keymaps/4x6_ortho/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/keymaps/4x6_ortho/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/redscarf_i/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* rename keymaps, add default
* final touches! i think we're there
* remove .gitignore from keymaps directory
* remove unused custom keycodes from ortho_custom_4x5 keymap
* remove ortho_custom_5x4 keymap (identical to ortho_5x4 keymap)
* remove firmware size impacts from rules.mk
* change "MCU selection" to "MCU name" in rules.mk
* complete matrix array for LAYOUT_ortho_5x4 macro
Probably not needed, but I like when it's complete.
* add numpad layout macros
* correct info.json data
* update readme
Co-Authored-By: Ben Weakley <2173281+Defying@users.noreply.github.com>
* rename ortho keymaps to rows by columns per QMK convention
* rules.mk templating
* change uint32_t to layer_state_t per drashna
* use led_update_kb() per drashna
Co-authored-by: Ben Weakley <2173281+Defying@users.noreply.github.com>
Co-authored-by: fauxpark <fauxpark@gmail.com>
* correct the matrix pin for db63
* first correct layout
* adding RGB support for db63
* adding backlighting keycode
* enable back extension
* update readme for the bootloader
* correct the capslock pin
* update correct info.json and layout following suggestion
* editing contact
* Update keyboards/db/db63/README.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/db/db63/README.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Move some common matrix code to a common location
* Refactor some 'custom_matrix_helper' logic to use custom matrix lite
* Fix build for kinesis/stapelberg - abuse of vpath was picking up matrix.c from core when custom matrix was enabled
* Add validation for CUSTOM_MATRIX
* Added csc027 user folder and keymaps for both keebio/iris and planck
* Moved the git_macros variable out of the process_record_user function.
* Updated the usb_led code to use the new led_update_user instead of the led_set_user function.
* Update users/csc027/defines.h
Removed the "_______" macro definition in defines.h, since it has already been defined in QMK.
* Update users/csc027/defines.h
Removed the "XXXXXXX" macro definition in defines.h, since it has already been defined in QMK.
* Update users/csc027/csc027.c
Simplified several keyboard macro definitions in the csc027.c file by switching from SS_LCTRL to SS_LCTL in their definitions.
* Condensed both the planck and iris rules files to the minimal set of declarations.
* VIA Refactor
* Remove old code
* review changes
* review changes
* Fix cannonkeys/satisfaction75/prototype:via build
* Add via.h to quantum.h
* Move backlight init to after backlight config load
* Merge branch 'master' into via_refactor_pr
* Update user's rules.mk to new way of enabling VIA
* Added id_switch_matrix_state
* Review changes
* Added my UT47.2 Swedish layout with tap dance function.
* Move tap dance over to user space
* Removed config_common from config file
* Changes to workspace with new support for code16. Tested ok
* Swedish support
* Added code16 version of tapdance to userprofile.
* Created 4th layer and updated readme file. Removed ascii rep of layout.
* Tabdance updates
* Removed duplicated RGB keys.
* Added hvp minivan config
* Fixed tapdance key maps
* Added Planck 1 space base hvp layout
* Start of hvp xd75 layout. Way to many keys
* Added working config ink test for atreus62
* fixed smaller layout changes
* Updated tap dance with option 5
* Added better thump keys
* Created lets split layout
* Removed not used modes
* Updated to correct url
* Readme file
* Atreus62 readme
* Cleanup of keymap file
* Added tap dance
* Fixed missed adjustment
* Added hvp planck setup
* Update ascii
* will this work better?
* removed ascii
* Planck 1 space setup
* Fixed ascii local
* Added Corne setup
* Changes for lets split
* Atreus62 config
* Added Lily58
* Setup corne
* Setup planck
* Updated lets split
* UT47 setup
* Setup a The Vanboard.
* Alt Ctrl
* #define D_NAVI MT(MOD_LCTL | MOD_LSFT, KC_D)
* Fix D_NAVI & plank midi
* Fixed PR comments
* Added pragma
* Moved def to user space
* Removed not used endif
* Added def to users space
* Added rules to van
* Removed not used part of config
* Removed not used layout
* Removed not needed comments
* Remove not needed keymap_config_t
* Removed broken ascii from readme files and removed not needed rules
* Added spaces to readme file
* Removed xd75 from branch
* Aranck now supports community MIT layouts, also minor optimisations done
* Update keyboards/handwired/aranck/keymaps/turkishish/readme.md
* Update keyboards/handwired/aranck/readme.md
* Use White channel on RGBW LEDs
Co-authored-by: kwerdenker <sebastian.spindler@gmail.com>
* Manually apply white channel to array
* Move where convert_rgb_to_rgbw is called
* Fix type for rgbw led struct
* Add changes to Ergodox EZ
can revert if deemed necessary
* Revert "Add changes to Ergodox EZ"
This reverts commit aa44db198d.
* Revert "Fix type for rgbw led struct"
This reverts commit c5c744cba0.
* Revert "Move where convert_rgb_to_rgbw is called"
This reverts commit cd7f17caf6.
* Revert changes and fix up functions
* Enable white channel for Ergodox EZ as well
* Only run conversion of rgblight is enabled
Co-authored-by: kwerdenker <sebastian.spindler@gmail.com>
* add new keyboard
* update config to use
* confirm config that works
* fix the keymaps and what not
* default keymap update
* update readme
* update and remove unncessary files
* update IDs and remove unused definitions
* update readme
* add new keyboard
* update config to use
* confirm config that works
* fix the keymaps and what not
* default keymap update
* update readme
* update and remove unncessary files
* update IDs and remove unused definitions
* update readme
* remove unused stuff
* update default keymap and add my own with layer indicator LEDs
* update README
* add crd's layout as part of the default as well
* some specific space fixes
* update readme for flashing
* remove code and use mcu selection instead. yay!
* remove vlk from default and enable velocikeys in madhatter
* remove BL_ from default
* and remove BL_ from madhatter as well
* Update keyboards/cheshire/curiosity/keymaps/crd/keymap.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-authored-by: Khader Syed <35927972+chapter63@users.noreply.github.com>
Co-authored-by: fauxpark <fauxpark@gmail.com>
* add indicator lighting support thanks to Keebology tracing
* set the correct number of underglow LEDs
* add comments and skeletal structure for layer indicator LEDs
* add backlight areas pins
* update readme
* we can't turn leds on based on zones, so we use multiple backlight pin support instead to turn them ALL on and control them.
* add comments to backlight setting
* make a more useful default keymap that can also be used for testing
* add duck orion to list
* add indicator led support
* update readme
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* add the appropriate header files
* fix indent so Drashna will not die
* Update keyboards/duck/orion/v3/v3.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/duck/orion/v3/keymaps/default/keymap.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/duck/orion/v3/keymaps/default/keymap.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/duck/orion/v3/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/duck/orion/v3/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/duck/orion/v3/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Fix key object order
info.json: Reorder the key objects into the order required by kyria.h
* linting
info.json: fix indent depth and trailing whitespaces
* Minimize visual footprint
info.json: Subtract 0.25 from each Y value to minimize the keyboard dimensions when rendered
* Initial commit for K-Nunmpad
* Changed layoutname
Corrected the files according to drashnas suggestions.
* Some names have been changed
* Some code thats not been used has been removed
* Fixed rules.mk
When adding the commnity layout, tapdancing broke. This was fixed with
rules.mk was changed in the k-numpad and karlssn keymap.
* Cleanup according fauxpark
Cleaned up the readme.md and the rules.mk according to feedback from
fauxpark.
