forked from forks/qmk_firmware
7f7f763598
* Fixed typo of 'confid.h' to 'config.h' * Fixed broken links in docs * Fixed a lot of dead links
32 lines
1.3 KiB
Markdown
Executable file
32 lines
1.3 KiB
Markdown
Executable file
TADA68
|
|
======
|
|
|
|
A compact 65% keyboard.
|
|
|
|
Keyboard Maintainer: QMK Community
|
|
Hardware Supported: TADA68 PCB
|
|
Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/products/tada68-mechanical-keyboard-gateron-swtich-65-layout-dye-sub-keycaps-cherry-profils?variant=34710238797) [kbdist](http://www.kbdist.com/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make tada68:default:bin
|
|
|
|
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
|
|
|
## Flashing Instructions
|
|
|
|
*Read all the instructions, there are a few warnings of things to avoid doing to avoid bricking your Tada68. _It is much too easy to do! _
|
|
|
|
1) from the `qmk_firmware\` directory run:
|
|
```
|
|
$ make tada68:default:flashbin
|
|
```
|
|
|
|
2) Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.
|
|
|
|
3) You'll see a new drive on your computer called TADA68. Backup the original factory `FLASH.BIN` file thats inside it.
|
|
|
|
4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive.
|
|
|
|
5) *Do not eject the USB device.* Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
|