forked from forks/qmk_firmware
1.3 KiB
1.3 KiB
Ploopyco Trackball
It's a DIY, QMK Powered Trackball!!!!
- Keyboard Maintainer: PloopyCo, Drashna Jael're, Germ
- Hardware Supported: ATMega32u4 8MHz(3.3v)
- Hardware Availability: Store, GitHub
Make example for this keyboard (after setting up your build environment):
make ploopyco/trackball/rev1:default:flash
make ploopyco/trackball/rev1_005:default:flash
To jump to the bootloader, hold down "Button 4" (immediate right of the trackball)
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Revisions
There are two main revisions for the PloopyCo Trackball, everything up to 1.004, and 1.005-1.006.
In the 1.005 revision, button for was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5.
The PCB should indicate which revision this is.
Customizing your PloopyCo Trackball
You can find customziation options here.