varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/studiokestra/galatea/readme.md
studiokestra d91857d5bb
Add Galatea rev3 keyboard (#21758)
2023-08-19 15:24:06 -06:00

1.4 KiB
Raw Blame History

studiokestra/galatea

studiokestra/galatea

TKL H87/88c compatible PCB with support for the most common layouts.

  • Keyboard Maintainer: Studio Kestra
  • Hardware Supported: Most H87C compatible keyboards
  • Hardware Availability: https://RNDKBD.com; https://geon.works/
  • Rev1 firmware is used for Galatea PCBs with no RGB underglow.
  • Rev2 firmware is used for Galatea PCBs with RGB underglow.
  • Rev3 firmware is used for Galatea PCBs with RP2040 chip w/ RGB underglow.

Make example for this keyboard (after setting up your build environment):

make studiokestra/galatea/rev1:default

Flashing example for this keyboard:

make studiokestra/galatea/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available