forked from forks/qmk_firmware
9682fca47b
ANAVI Macro Pad 2 is an open source mini mechanical keyboard with 2 keys and backlit. Powered by ATtiny 85 microcontroller and with microUSB connector. Designed with KiCad. Provides the following keymaps for ANAVI Macro Pad 2: - Default (with a, b and combo to control the LEDs) - Copy & paste - Tap dance example with a, b and c - Mute - Volume - Zoom - Jitsi Meet Co-authored-by: Drashna Jaelre <drashna@live.com> Signed-off-by: Leon Anavi <leon@anavi.org> Co-authored-by: Drashna Jaelre <drashna@live.com>
50 lines
1.8 KiB
Markdown
50 lines
1.8 KiB
Markdown
# ANAVI Macro Pad 8
|
|
|
|
ANAVI Macro Pad 2 is an open source mini mechanical keyboard with 2 keys and backlit. Powered by ATtiny 85 microcontroller and with microUSB connector. Designed with KiCad.
|
|
|
|
* Keyboard Maintainer: [Leon Anavi](https://github.com/leon-anavi)
|
|
* Hardware Supported: ANAVI Macro Pad 2
|
|
* Hardware Availability: [PCB Files](https://github.com/AnaviTechnology/anavi-macro-pad-2)
|
|
|
|
**Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make anavi/macropad2:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Flashing
|
|
### Prerequisites
|
|
|
|
```bash
|
|
git clone https://github.com/micronucleus/micronucleus.git
|
|
cd micronucleus/commandline/
|
|
sudo make install
|
|
```
|
|
|
|
On GNU/Linux distributions, you will need proper privileges to access the MCU. You can either use `sudo` when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following:
|
|
|
|
```bash
|
|
sudo udevadm control --reload-rules
|
|
sudo udevadm trigger
|
|
```
|
|
|
|
### Instructions
|
|
|
|
* Run one of the following commands:
|
|
|
|
```bash
|
|
make anavi/macropad2:default:flash
|
|
|
|
# or directly with...
|
|
micronucleus --run <firmware.hex>
|
|
```
|
|
|
|
* Plug ANAVI Macro Pad 2 to the USB port and the flashing procedure should start
|
|
|
|
### Recovery
|
|
|
|
* [Original Firmware](https://github.com/AnaviTechnology/anavi-macro-pad-2/tree/main/bootloader)
|
|
* [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp)
|