forked from forks/qmk_firmware
23 lines
1 KiB
Markdown
23 lines
1 KiB
Markdown
# Mach 3
|
|
|
|
A 3x3 macropad with RGB underglow.
|
|
Note: It sets an output pin to high, which is the alimentation of the backlight circuit.
|
|
|
|
* Keyboard Maintainer: [etiennelepagel](https://github.com/etiennelepagel)
|
|
* Hardware Supported: Mach 3 from Mach Keyboards
|
|
* Hardware Availability: [Mach Keyboards Official Website](https://machkeyboards.com/)
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make machkeyboards/mach3:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|