forked from forks/qmk_firmware
e1303a30d2
Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
31 lines
1.3 KiB
Markdown
31 lines
1.3 KiB
Markdown
# BM980HSRGB
|
|
|
|
|
|
|
|
A 1800, hotswap, in switch RGB keyboard from KPRepublic.
|
|
|
|
* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
|
|
* Hardware Supported: BM980HSRGB
|
|
* Hardware Availability:
|
|
* https://kprepublic.com/products/bm980rgb-bm980-rgb-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c
|
|
* https://www.aliexpress.com/item/1005002509519466.html
|
|
* https://item.taobao.com/item.htm?id=645862298692
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make kprepublic/bm980hsrgb:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make kprepublic/bm980hsrgb:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in one of 3 ways:
|
|
|
|
* Short the two-pad footprint beneath the f12 key while the board is plugged in
|
|
* Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
|
|
* Hold the Esc key while connecting the USB cable (also erases persistent settings)
|