qmk_firmware/keyboards/kwstudio/scorpio_rev2/readme.md

Scorpio Rev2

This keyboard use 8MHz HSE and STM32F103 as MCU.

• Keyboard Maintainer: https://github.com/khchen2004
• Hardware Supported: Scorpio Rev2 PCB
• Hardware Availibility: Private GB

Make example for this keyboard (after setting up your build environment):

make kwstudio/scorpio_rev2:default

Flashing example for this keyboard:

make kwstudio/scorpio_rev2:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
• Keycode in layout: Press the key mapped to QK_BOOT if it is available