forked from forks/qmk_firmware
99 lines
5.6 KiB
Markdown
99 lines
5.6 KiB
Markdown
# Converters
|
|
|
|
Since many drop-in replacement controllers now exist, we've done our best to make them easy to use in existing designs.
|
|
|
|
This page documents the handy automated process for converting keyboards.
|
|
|
|
### Supported Converters
|
|
|
|
Currently the following converters are available:
|
|
|
|
| From | To |
|
|
|------------|-------------------|
|
|
| `promicro` | `proton_c` |
|
|
| `promicro` | `kb2040` |
|
|
| `promicro` | `promicro_rp2040` |
|
|
| `promicro` | `blok` |
|
|
|
|
See below for more in depth information on each converter.
|
|
|
|
## Overview
|
|
|
|
Each converter category is broken down by its declared `pin compatibility`.
|
|
This ensures that only valid combinations are attempted.
|
|
|
|
You can generate the firmware by appending `-e CONVERT_TO=<target>` to your compile/flash command. For example:
|
|
|
|
```sh
|
|
qmk flash -c -kb keebio/bdn9/rev1 -km default -e CONVERT_TO=proton_c
|
|
```
|
|
|
|
You can also add the same `CONVERT_TO=<target>` to your keymap's `rules.mk`, which will accomplish the same thing.
|
|
|
|
?> If you get errors about `PORTB/DDRB`, etc not being defined, you'll need to convert the keyboard's code to use the [GPIO Controls](gpio_control.md) that will work for both ARM and AVR. This shouldn't affect the AVR builds at all.
|
|
|
|
### Conditional Configuration
|
|
|
|
Once a converter is enabled, it exposes the `CONVERT_TO_<target_uppercase>` flag that you can use in your code with `#ifdef`s, For example:
|
|
|
|
```c
|
|
#ifdef CONVERT_TO_PROTON_C
|
|
// Proton C code
|
|
#else
|
|
// Pro Micro code
|
|
#endif
|
|
```
|
|
|
|
## Pro Micro
|
|
|
|
If a board currently supported in QMK uses a [Pro Micro](https://www.sparkfun.com/products/12640) (or compatible board), the supported alternative controllers are:
|
|
|
|
| Device | Target |
|
|
|------------------------------------------------------------------------|-------------------|
|
|
| [Proton C](https://qmk.fm/proton-c/) | `proton_c` |
|
|
| [Adafruit KB2040](https://learn.adafruit.com/adafruit-kb2040) | `kb2040` |
|
|
| [SparkFun Pro Micro - RP2040](https://www.sparkfun.com/products/18288) | `promicro_rp2040` |
|
|
| [Blok](https://boardsource.xyz/store/628b95b494dfa308a6581622) | `blok` |
|
|
|
|
Converter summary:
|
|
|
|
| Target | Argument | `rules.mk` | Condition |
|
|
|-------------------|---------------------------------|------------------------------|-------------------------------------|
|
|
| `proton_c` | `-e CONVERT_TO=proton_c` | `CONVERT_TO=proton_c` | `#ifdef CONVERT_TO_PROTON_C` |
|
|
| `kb2040` | `-e CONVERT_TO=kb2040` | `CONVERT_TO=kb2040` | `#ifdef CONVERT_TO_KB2040` |
|
|
| `promicro_rp2040` | `-e CONVERT_TO=promicro_rp2040` | `CONVERT_TO=promicro_rp2040` | `#ifdef CONVERT_TO_PROMICRO_RP2040` |
|
|
| `blok` | `-e CONVERT_TO=blok` | `CONVERT_TO=blok` | `#ifdef CONVERT_TO_BLOK` |
|
|
|
|
### Proton C :id=proton_c
|
|
|
|
The Proton C only has one on-board LED (C13), and by default, the TXLED (D5) is mapped to it. If you want the RXLED (B0) mapped to it instead, add this line to your `config.h`:
|
|
|
|
```c
|
|
#define CONVERT_TO_PROTON_C_RXLED
|
|
```
|
|
|
|
The following defaults are based on what has been implemented for STM32 boards.
|
|
|
|
| Feature | Notes |
|
|
|----------------------------------------------|------------------------------------------------------------------------------------------------------------------|
|
|
| [Audio](feature_audio.md) | Enabled |
|
|
| [RGB Lighting](feature_rgblight.md) | Disabled |
|
|
| [Backlight](feature_backlight.md) | Forces [task driven PWM](feature_backlight.md#software-pwm-driver) until ARM can provide automatic configuration |
|
|
| USB Host (e.g. USB-USB converter) | Not supported (USB host code is AVR specific and is not currently supported on ARM) |
|
|
| [Split keyboards](feature_split_keyboard.md) | Partial - heavily dependent on enabled features |
|
|
|
|
### Adafruit KB2040 :id=kb2040
|
|
|
|
The following defaults are based on what has been implemented for [RP2040](platformdev_rp2040.md) boards.
|
|
|
|
| Feature | Notes |
|
|
|----------------------------------------------|------------------------------------------------------------------------------------------------------------------|
|
|
| [RGB Lighting](feature_rgblight.md) | Enabled via `PIO` vendor driver |
|
|
| [Backlight](feature_backlight.md) | Forces [task driven PWM](feature_backlight.md#software-pwm-driver) until ARM can provide automatic configuration |
|
|
| USB Host (e.g. USB-USB converter) | Not supported (USB host code is AVR specific and is not currently supported on ARM) |
|
|
| [Split keyboards](feature_split_keyboard.md) | Partial via `PIO` vendor driver - heavily dependent on enabled features |
|
|
|
|
### SparkFun Pro Micro - RP2040 and Blok :id=promicro_rp2040
|
|
|
|
Currently identical to [Adafruit KB2040](#kb2040).
|