forked from forks/qmk_firmware
29169243a7
* feat: support for dumbpad_v3x - all credit goes to - ref: https://github.com/qmk/qmk_firmware/pull/16285 - included comment from noroadsleft - ref: https://github.com/qmk/qmk_firmware/pull/16285#pullrequestreview-1038213899 * fix: add newline on every .c, .h, .mk files end * feat: response to change https://github.com/qmk/qmk_firmware/pull/18663#discussion_r991515821 * feat: response to change https://github.com/qmk/qmk_firmware/pull/18663#discussion_r991516192
28 lines
1.1 KiB
Markdown
28 lines
1.1 KiB
Markdown
# dumbpad v3.x - rgb & hotswap
|
|
|
|
|
|
|
|
A 4x4 numpad/macropad with a rotary encoder to the left of the bottom row of keys.
|
|
|
|
- Keyboard Maintainer: [imchipwood](https://github.com/imchipwood) // [deveth0](https://github.com/deveth0)
|
|
- Hardware repository: [dumbpad on github](https://github.com/imchipwood/dumbpad)
|
|
- PCB Revisions Supported: v3.1
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make dumbpad/v3x:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make dumbpad/v3x:default:flash
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
- **Bootmagic reset**: Hold down the encoder and plug in the keyboard
|
|
- **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
- **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|