forked from forks/qmk_firmware
dcc47ea31b
Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
26 lines
1.1 KiB
Markdown
26 lines
1.1 KiB
Markdown
# proteus67
|
|
|
|
|
|
|
|
67 key ortholinear layout with rotary encoder.
|
|
|
|
* Keyboard Maintainer: [James Gzowski](https://github.com/gzowski)
|
|
* Hardware Supported: Elite-Pi or equivilent RP2040 controller with additional I/O along bottom.
|
|
* Build Guide: [Proteus67](https://github.com/gzowski/Proteus67)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make proteus67:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make proteus67:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB, if using a RP2040 press repeatidly to enter boot mode.
|
|
* **Hold down boot loader button on MCU** Hold down the boot loader button on the MCU while plugging in the keyboard
|