forked from forks/qmk_firmware
26ce66e306
* Update docs for default keymap * Update COD67 docs with fixes and macOS details * Add a personal COD67 2-layer map with RGB control * Enable RGB, NKRO and change firmware format to bin * Swap k0D and k48 to fix backspace on the top row * Add RGB config and tidy up a bit * Finish default map because merlin was full of bbq * Whoops, rogue tabs * Typo fix in the main COD67 readme * Remove empty function defs in keymap * Swap how the backspace key relocation happens * Fix PRODUCT_ID and add a link to software PWM docs * Disable NKRO and bootmagic and enable mouse keys * Better header guard * Whoops, forgot to remote the #endif
46 lines
2.1 KiB
Markdown
46 lines
2.1 KiB
Markdown
# Gray COD67
|
|
|
|
The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port.
|
|
|
|
There were only 75 units made worldwide.
|
|
|
|
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
|
|
Hardware Supported: Gray COD67
|
|
Hardware Availability: [Zfrontier](https://en.zfrontier.com/products/cod67)
|
|
|
|
## Bootloader mode
|
|
|
|
To put in bootloader mode, hold the `Esc` key while plugging in the USB cable.
|
|
|
|
## Making firmware
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make gray_studio/cod67:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Flashing in Windows
|
|
|
|
After putting your COD67 in bootloader mode, it will show up as a drive.
|
|
|
|
* Rename the resulting `.bin` file to `COD67.BIN`.
|
|
* Drag and drop your new `COD67.BIN` to the drive, overwriting the previous `COD67.BIN` stored on it.
|
|
* Wait a few seconds for it to write. The caps lock LED flashes rapidly while writing.
|
|
* Press the `Esc` key again to reset the board. You are now ready to type!
|
|
|
|
## Flashing in macOS
|
|
|
|
After putting your COD67 in bootloader mode, it will show up as a drive.
|
|
|
|
* Rename the resulting `.bin` file to `COD67.BIN`.
|
|
* Drag the existing `COD67.BIN` file from the drive to the Trash in Finder.
|
|
* Empty the Trash in Finder. It's important you do that due to how macOS handles hidden `.Trashes` on removable drives. It needs to be empty to free up flash space.
|
|
* Drag and drop your new `COD67.BIN` to the drive.
|
|
* Wait a few seconds for it to write. The caps lock LED flashes rapidly while writing.
|
|
* Press the `Esc` key or eject the drive in Finder to reset the board. You are now ready to type!
|
|
|
|
## Notes
|
|
|
|
The backlight pin is attached to a non PWM pin `D4` so the backlight is only on/off.
|