1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/keyboards/1upkeyboards/sweet16v2
2023-12-20 13:31:50 +11:00
..
kb2040 Rename RGB_DISABLE_WHEN_USB_SUSPENDED -> RGB_MATRIX_SLEEP (#22682) 2023-12-20 13:31:50 +11:00
keymaps Encodermap direction define. (#20454) 2023-04-15 16:18:44 +01:00
pro_micro Rename RGB_DISABLE_WHEN_USB_SUSPENDED -> RGB_MATRIX_SLEEP (#22682) 2023-12-20 13:31:50 +11:00
readme.md Product changes to 1up lineup (#18382) 2022-10-05 22:52:18 +01:00

sweet16v2

A 4x4 macropad with RGB inswitch lighting and underglow.

  • Keyboard Maintainer: ziptyze
  • Hardware Supported: 1upkeyboards Sweet 16 v2
  • Hardware Availability: 1upkeyboards

Make example for this keyboard using an atmel-based controller (after setting up your build environment):

make 1upkeyboards/sweet16v2/promicro:default

Flashing example for this keyboard using an atmel-based controller:

make 1upkeyboards/sweet16v2/promicro:default:flash

Make example for this keyboard using an rp2040-based controller (after setting up your build environment):

make 1upkeyboards/sweet16v2/kb2040:default

Flashing example for this keyboard using an rp2040-based controller:

make 1upkeyboards/sweet16v2/kb2040:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways for atmel-based controllers:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available

Enter the bootloader in 2 ways for rp2040-based controllers:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Bootsel button: Hold the bootsel button on controller and plug in the keyboard